Cable Shear SZ60 and SZ100

Cable Shear SZ60 and SZ100
2 sizes available
Clip for length
attitude
Telescope arms
Manual blade advance
Aluminium tube
Emergency
release
Cutting head
(special-quality high-grade tool steel, oil-hardened)
Cable Shear SZ60 and SZ100
Models SZ60 and SZ100 cable shears are designed for cutting fine-wire aluminium and copper cables in single strand or
multi-strand configurations. These cable shears are capable of cutting smoothly and cleanly without crushing the cables. Key
design features of the cutting tools include a forged cutting head, high-strength aluminium tube arms, adjustable screw
hinge and replaceable head. The telescope arms are made from anodised aluminium pipe with two-component grips. The
blade is made from hardened steel for maximum durability.
• For copper and aluminium cables, single and multiple wire - also with hard rubber or plastic sheath
• Also suitable for cables with iron sheath reinforcement
• Little handforce required for cutting due to optimum transmission ratio
• High cutting capacity due to two-hand operation and ratchet action
• The blade can be opened in any cutting position
• Handle length with multiple position adjustment from 400 - 600 mm
(short transport length, individual adaptation to working conditions
• Blade: special-quality high-grade tool steel, oil-hardened
• Handles: high-strength oval aluminium tubing
• Not suitable for steel wire and wire ropes
Cable Shear SZ60
Cable Shear SZ100
Max.
Wire
Cross
740 mm² (similar to MCM 1400)
Max.
Wire
Cross
960 mm² (similar to MCM 1900)
Length
25“ - 33“
Length
27“ - 35“
Weight
8.42 lbs.
Weight
11 lbs.
Part #
R611 060 2
Part #
R611 100 2
burnished,
aluminium
tube arms
burnished,
aluminium
tube arms
Telescope arms
Rennsteig Tools, Inc.
301 Route 17 North, Suite 800
Rutherford, NJ 07070
Phone: 330-315-3044
Mail: sales@rennsteig.us
Fax: 330-319-8135
Web: www.rennsteig.us