MultiBead Gun Puffe Engineering MultiBead Guns Type MB

MB
MultiBead Gun
Puffe Engineering MultiBead
Guns Type MB
Are build for long live time and hard
industrial environment..
The MB guns are able to dispense
continues or intermittent glue beads on a
temperature level of up to 200°C optional
250°C
Benefits:
 Aluminium gun body
 Optimised for solid hotmelt
 Available up to 2m width
 Long operation time due to high end needle
sealing system
 Temperature level up to 200°C
(optional 250°C)
 Available with normal nozzle tip, reduced or
zero cavity system
 Integrated needle adjustment system
 Fast intermittent due to air/air driven piston
system
 HT– magnetic valve
 Wide range on selectable sensors PT100,
FeCuNi, and N120
 Integrated shafts to put into a holding
system
Solide
Applications:
 Glue bead dispense on Rotary pleating
machines
 Glue bead dispense on knife pleating
machines
MB
Technical information
Optional
Twin Nozzle
* Depending on adhesive
Max. Switching speed
3,000 / min
Power supply
240V / AC +PE / 24V
Temperature sensor
PT100 / FeCuNi / Ni120
Power supply mag valve
24 Volt / DC
Max. Temperature
200°C (optional 250°C)
Air supply
6 bar
Max. System presure
85 bars
Puffe Engineering GmbH
Rebenstraße 24
53757 Sankt Augustin
info@puffe.eu www.puffe.eu
Tel.:
+49 (0)2241-866060-0
Fax.:
+49 (0)2241-866060-90
All information subject to change without notice © Puffe Engineering GmbH
Standard
Rev.-No.01
16.02.2015
Sample MB 24– FM25