BTI Service Access 805 Datasheet High-performance Carrier Ethernet business

Datasheet
BTI Service Access 805
High-performance Carrier Ethernet business
services and 4G/LTE mobile backhaul switch
Flexible and Reliable Services Platform
The BTI Service Access 805 is an ultra-compact platform that delivers
high-performance connectivity for Ethernet business services, cloud
services and mobile backhaul applications. The low power, temperature-resilient platform is ideal for deployment at wireless tower
sites or business customer premises. The BTI Service Access 805
allows service providers to offer price competitive and high performance 10GE access services while reducing operational costs and
management complexity.
The BTI Service Access 805 boasts a 40 Gbps switching fabric and
provides comprehensive Ethernet services demarcation, classification,
traffic management, prioritization, aggregation and service interworking functions. The platform supports G.8032v2 sub-50ms ring
protection, with laddered rings and multiple instances for ultimate
reliability and flexibility.
Standards-Based Multiservice Delivery
BTI’s Service Access 805 supports industry-standard Metro Ethernet
Forum (MEF) Carrier Ethernet (CE) 2.0 service types for high-capacity
Ethernet business services and mobile backhaul applications. Tightly
integrated with the BTI 7000/7800 Series, the BTI Service Access 805
serves as the Ethernet metro service access component of a complete
end-to-end packet optical networking solution, enabling a costeffective and seamless path to high-performance Ethernet services.
The platform leverages dedicated hardware for 1588v2 clock recovery,
providing 1 pulse per second (1PPS) and time-of-day (ToD) GPS
minimum recommended data sentence (GPRMC) outputs for phase
and clock synchronization in mobile backhaul applications.
Features and benefits
»» Ultra compact, low power and temperature-resilient
design, ready for tower or CPE deployment, delivers high
performance and reduces operational cost
»» Flexible 4x GE/10GE multi-rate SFP+ ports so you can pay-asyou-grow
»» G.8031 and G.8032v2 ring protection ensures high reliability
with sub-50ms protection switching performance
»» MEF CE 2.0 compliant services: E-Line and E-LAN
Comprehensive Provisioning, Monitoring and
Management
»» Comprehensive fault management and performance
monitoring with Y.1731 OAM, loopback, link trace, delay,
jitter and loss measurement
The BTI Service Access 805 supports in-band and out-of-band SNMP
management as well as a command line interface (CLI) for configuration, monitoring, and control functions. The platform features
hardware accelerated, industry-standard Y.1731 performance
monitoring for measuring key service performance metrics including
latency, jitter, and frame loss. Built in RFC2544 test methodology and
Y.1564 service activation test help accelerate service turn up. BTI’s
proNX Control Software and BTI proNX SLA Portal provide easy-touse graphical user interfaces (GUIs) that simplify operations, accelerate
service velocity, and optimize quality of experience (QoE) with end-toend service provisioning and service level agreement monitoring.
»» Built in RFC2544 and Y.1564 test capabilities
»» Synchronization source derived from SyncE Ethernet
interfaces or 1588v2 slave clock
»» Fully integrated into BTI’s proNX control software and cloudbased SLA portal
BTI proNX Service Manager and SLA Portal
805
805
10G
PVX/7000
805
805
10G 10G
PVX/7000
805
PVX/7000
Nx10G/OTU2
Nx10G/OTU2
PVX/7000
1G
10G
810
805
805
810
7800
Ethernet Interface
Front LEDs
Power Supply Connectors
Serial Port
Local LAN Port
BITS-OUT SMA Connector
Ethernet Protection
4 ports x 1GbE / 10GbE SPF+
Red: Critical, Major and Minor alarms
Green: RUN
Terminal block for -48VDC / +24VDC or
AC via 12V Adapter
RJ45 / RS-232C
10/100Mbps, RJ45
10MHz output & 1PPS output
SMA connector
•
•
ITU-T G.8031 and G.8032v2 (2010) Ethernet Ring protection switching
with sub-50ms protection switching performance
Link Protection with LACP as well as Static LAG using Active/Standby
Performance Monitoring Service for SLA Metrics
Ethernet SLA PMs
24hr, 15min, 5 min, 1 min bins for SLA PMs
Y.1731 Frame Delay, Frame Delay Variation
& Frame loss
Y.1564 Multi-Service Activation test
Ethernet Services PMs
24hr, 15min, 5 min bins
Bytes counters declared Red, Yellow and
Green per EVC
Packet counters Received, Transmitted and
Dropped per EVC
Service Utilization per CIR
Ethernet Port PMs
24hr and 15min bins for port PMs
Rx, Tx and error statistics
Input and Output Utilization per port
Synchronization
•
•
•
•
ITU-T G.8261 / G.8262 / G.8264 SyncE on all interfaces
SyncE status message support
IEEE 1588v2 ordinary clock (slave only)
Internal Stratum-3 Clock with holdover to meet ITU-T G.813
Ethernet Switching
Switching Fabric
40 Gbps
MAC Address Table
32K entries
Jumbo Frames
9600 Bytes
4096 VLANs (802.1Q C-tagged) and Stacked VLANs (802.1ad S-tagged)
IEEE 802.1ad Provider Bridging (C-tag, S-tag)
Ethernet Services
•
MEF CE2.0 Compliant Carrier Ethernet E-Line and E-LAN
Traffic Management
•
•
•
•
VLAN management (push/pop/swap) for C-tag and S-tag
Service classification based on any field combination of L2 to L4
MEF-compliant policing (CIR/CBS/EIR/EBS) with trTCM and 8 CoS
Supports large CBS up to 32768 KB to guarantee SLA performance
levels on bursts of frames which exceed the CIR
Loopback Functionality
•
•
•
•
Station loopback support with Layer 1, Layer 2 (MAC swap), Layer 3
(IP swap) and Layer 4 (TCP/UDP port swap) per port and EVC
Station loopback reacts to in-band loopback requests sent from
test-sets like EXFO and other test equipment
IEEE 802.3ah and Y.1731 LBM OAM loopback command
Latching loopback for the in-band automatic loopback request
defined by MEF standard (future)
Ethernet OAM Functionality
•
•
•
•
•
•
•
•
IEEE 802.3ah EFM OAM link management including Dying Gasp
message for power failure alarm
IEEE 802.1ag Connectivity Fault Management (CFM) with 1,000
concurrent CFM sessions
ITU-T Y.1731 Fault Management (FM) and Performance
Monitoring (PM)
Supports highly accurate One-Way Delay Measurement using
1588v2 PTP
Embedded RFC2544 Test Generator and Analyzer (throughput,
latency, frame loss and Back-to-Back) with automatic report
generation
TWAMP (Two Way Active Measurement Protocol) – Light reflector
based on RFC5357
MEF 30.1 FM and MEF 35 PM for other vendor interoperability
(future)
Y.1564 Service Activation Testing using Y.1731 LBM/LBR up to 4
sessions
User-defined Threshold settings and Threshold-Crossings Alerts (TCAs) for
Delay, Delay Variation and Frame Loss
Security
•
•
•
•
•
Telnet with SSHv2
Remote Authentication via RADIUS
Access Control List (ACL)
IEEE 802.1x Port Authentication
SNMPv3 with authentication and encryption (future)
Management
•
•
•
•
SNMPv1/v2c Get & Sets
Serial Port (RJ45) using CLI
Out-of-Band Management (local LAN port) via Telnet and SNMP
In-Band Management using VLAN
Standard Compliance
•
•
•
•
IEEE 802.1Q, 802.1ag, 802.1ad (LLDP) and 802.1x, 802.3ah and
802.3ad (LACP)
ITU-T Y.1731, G.8032v2, G.8261/8262/8264
CE 2.0, MEF 6.1, 9, 10.2, 11, 14, 20, 23.1, 25, 26.1, 30, 33 and 35
IEFT RFC2544, RFC5357, RFC2863 (IF-MIB), RFC3418 (MIB for SNMP),
RFC4188 (Bridge), RFC2922 (Physical Topology)
Physical Characteristics
Dimensions
1.73h x 7.32w x 7.32d (in)
44h x 186w x 187d (mm)
Weight
1.4Kg
Operation
Operating Temperature
Storage Temperature
Humidity
-40°C to +65°C
-40°C to +70°C (GR-63-CORE)
Up to 85% non-condensing
Power Supply
AC: via 12V AC Adapter
DC: -48 VDC / +24 VDC (nominal)
A and B Feed per Power Supply (DC)
Typical 20W/Maximum 30W
Redundant Power Supply
Power Consumption
Regulatory
FCC Part 15 Class A
EN 55022, EN 55024 Class A
CSA
UL 60950-1, IEC 60950-1, EN 61000
GR-63-CORE Issue 3
GR-1089-CORE Issue 5
CE
Compliance
•
•
ETSI 300 019 Class 1-1, Class 2-3, Class 3-1
RoHS 5/6: Compliance with Directive 2002/95/EC
Information in this document is subject to change without notice. Features listed are subject to availability per product roadmap.
BTI Systems, BTI, the BTI corporate logo, packetVX, and proNX are trademarks of BTI Systems Inc. © 2014 BTI Systems Inc. All rights Reserved.
For more information please contact us at info@btisystems.com or call +1 613. 287. 1700 or +1 866. 626. 9154 (toll free in North America).
2014-BTI-DS0206.2
Base System Hardware