/PA Dynamon SR6 PA

n
o
A
m
P
a
/
n
6
y
D SR
Superplasticizer with retarding effect based
on modified acrylic for ready-mixed concrete
with a low water/cement ratio and long water
retention even in hot climates
DESCRIPTION OF PRODUCT
Dynamon SR 6/PA is a modified acrylic-based
admixture for ready-mixed concrete, belonging
to the MAPEI Dynamon SR system.
WHERE TO USE
Concretes manufactured with Dynamon SR 6/PA have
a high level of workability (consistency classes plastic or
fluid according to ASTM standard), and are consequently
easy to apply when fresh. At the same time they offer
excellent mechanical performances when hardened.
Dynamon SR 6/PA is especially recommended for
the ready-mixed concrete sector and whenever a
considerable reduction in mixing water is required,
coupled with excellent maintenance of initial workability
of the concrete in various consistency classes, even
when surrounding temperature is high.
The main application areas for Dynamon SR 6/PA are:
• ready-mixed concrete with long slump retention,
especially in hot weather;
• concrete for waterproof, durable applications
according to the specified exposure class;
• RCC.
TECHNICAL CHARACTERISTICS
Dynamon SR 6/PA is a water solution containing acrylic
polymers (without formaldehyde), capable of dispersing
the grains of cement and promoting slow development
of initial cement hydration.
HOW TO USE
Dynamon SR 6/PA develops maximum dispersing
action when added after the other mix ingredients
(cement, aggregates, added minerals or filler materials
and at least 80% of the mixing water).
COMPATIBILITY WITH OTHER PRODUCTS
Dynamon SR 6/PA is compatible with other products
for producing special concrete, and especially with:
• Mapeplast SF silica fume based powder
admixture for manufacturing “top quality” concrete
(high strength, impermeability, durability);
• Expancrete, expansive agent for manufacturing
shrinkage compensated concrete;
• fly ash for the production of conventional concrete
or self-compacting concrete;
• Mapeform Eco and DMA 1000 form-release
agents for release concrete from formworks;
• Mapecure curing agents to protect concrete
structures from rapid water evaporation.
DOSAGE
Dosage by volume:
from 0.6 to 1.2 l per 100 kg of cement for conventional
concrete.
Different dosages from those suggested must be
previously tested through concrete trials, in addition to
consulting MAPEI Technical Services Department.
PACKAGING
Supplied in bulk quantities and 1,000 l IBC tanks.
STORAGE
Dynamon SR 6/PA can be stored for 12 months in
TECHNICAL DATA (typical values)
Consistency:
liquid
Colour:
brown
Density according to ISO 758 (g/cm³):
1.11 ± 0.03 at +20°C
pH:
6.0 ± 1.0
Main action:
water reduction and/or improved workability, retention
of workability in hot weather
Collateral action:
retarding of initial setting time, workability retention
Classification according to EN 934-2:
high range water reducing, hardening accelerating,
superplasticizer, tables 11.1 and 11.2
Classification according to ASTM C494:
type G standard
Classification according to ASTM C1017:
type II
Chlorides soluble in water according to
EN 480-10 (%):
< 0.1 (absent according to EN 934-2)
Alkali content (Na₂O equivalent) according to
EN 480-12 (%):
< 3.0
sealed containers, protect from frost.
Exposure to direct sunlight can provoke
variations of the colour tone without altering
in any way the performances of the product.
SAFETY INSTRUCTIONS FOR
PREPARATION AND APPLICATION
Dynamon SR 6/PA is not considered
as dangerous according to the current
regulations regarding the classification of
mixtures. It is however recommended to use
protective gloves and goggles, and to take
the usual precaution when handling chemical
products.
For further and complete information about
the safe use of our product please refer to
the latest version of our Material Safety
Data Sheet.
PRODUCT FOR PROFESSIONAL USE.
WARNING
Although the technical details and
recommendations contained in this product
data sheet correspond to the best of our
knowledge and experience, all the above
information must, in every case, be taken as
merely indicative and subject to confirmation
after long-term practical application; for
this reason, anyone who intends to use the
product must ensure beforehand that it is
suitable for the envisaged application. In
every case, the user alone is fully responsible
for any consequences deriving from the use
of the product.
Any reproduction of texts, photos and illustrations published
here is prohibited and subject to prosecution
(GB) A.G. BETA
PRODUCT IDENTITY
Please refer to the current version of the
Technical Data Sheet, available from our
website www.mapei.com
All relevant references
for the product are available
upon request and from
www.mapei.com
®
BUILDING THE FUTURE
6807-3-2014
n
o
am6/PA
n
Dy SR