Prospectus Industrial Inspection & Training Services (IITS) en ASNT NDT Level II Program

en
ASNT NDT Level II Program
Prospectus
Ultrasonic Testing
Radiographic Testing
Magnetic Particle Testing
Dye Penetrant Testing
20 December – 20 January' 2014
Organized by:
Industrial Inspection & Training Services (IITS)
Intro to NDT
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques
used in science and industry to evaluate the properties of a material, component or system without
causing damage. NDT is used in a variety of settings that covers a wide range of industrial activity,
with new NDT methods and applications, being continuously developed. Non-destructive testing
methods are routinely applied in industries where a failure of a component would cause significant
hazard or economic loss, such as in transportation, pressure vessels, building structures, piping,
and hoisting equipment. NDT can be used to:








Accident prevention & to reduce costs
To improve product reliability
To determine acceptance to a given equipment
To give information on repair criteria
To ensure structural integrity
Prevent accidents to save human life and environment
To minimize unscheduled plant shutdown
To reduce wastage of line and material by controlling manufacturing process
Details of the course
Course standard
Methods
Duration of course
Method of course
Learning assistive
Practical execution
Course suitable for
ASNT (American Society for Non Destructive Testing) SNT-TC-1A.
Ultrasonic Test (UT), Radiography Test (RT), Magnetic Particle Test (MT),
Penetrant Test (PT).
200 hours (UT-80hrs, RT-80 hrs, MT-20 hrs, PT-20 hrs).
Both theory (explaining, demonstrating & collaborating) and practical.
Special training videos thru projector screen.
In-house and out-house*. (* out-house depends on availability)
Personnel such as Engineers, Inspectors, Surveyors, QA/QC managers, Production
Engineer, Technicians who required a thorough and comprehensive knowledge of NDT
method basics, applications, practically using of the method, condition monitoring can
attend the course.
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka Cantonment, Dhaka 1216
Cell: 01927700880, email: safiq@iitsbd.com, web: www.iitsbd.com
Sectors that uses NDT:

















NDT contractors
Quality Control and Quality Assurance
Mechanical Construction
Motor vehicles manufacturing
Steel structures/buildings
Aircraft
Water craft
Power stations
Gas and oil sectors
Refineries
Fertilizer factories
Aerospace
Aviation
Construction
Manufacturing
Railroad
Alternative Energy: Nuclear, Wind, Solar etc.
Courses Contents:
1.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.
2.1
2.2
2.3
2.4
2.5
2.6
UT Level-I (40 hrs):
Introduction
Basic Principal of Acoustic
Equipment
Basic Testing Method
Testing Method (Contact, Immersion & Comparison of Method)
Calibration (Electronic & Functional)
Straight Beam Examination to Specific Procedure
Angle Beam Examination to Specific Procedure
UT Level-II (40 hrs.)
Review of Ultrasonic Technique Course
Evaluation of Base Material Product
Evaluation of Weldments
Evaluation of bonded structures
Discontinuity detection
Evaluation
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka Cantonment, Dhaka 1216
Cell: 01927700880, email: safiq@iitsbd.com, web: www.iitsbd.com
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
RT Level-I (40 hours)
Personnel Monitoring
Survey instrument
Leak testing and sealed radioactive sources
Radiation survey reports
Radiographic work practices
Exposure device
State and federal regulations
4. RT Level-II (40 hours)
4.1 Radiographic viewing
4.2 Application techniques
4.3 Evaluation of casting
4.4 Evaluation of weldments
4.5 Standards, codes and procedures for radiography
4.6 Review of basic radiography principles
4.7 Darkroom facilities, technique and processing
4.8 Identification, discontinuities and defects
4.9 Manufacturing processing and associated defects
4.10 Radiation safety principles review
5. MT Level-I & II (24 hours)
5.1 Principles of magnets and magnetic fields
5.2 Characteristics of magnetic fields
5.3 Magnetization by means of electrical current
5.4 Selecting the proper method of magnetization
5.5 Inspection material
5.6 Principle of demagnetization
5.7 Magnetic particle testing equipment
5.8 Type of discontinuities detected by Magnetic Particle Testing
5.9 Magnetic Particle Test indications and interpretations
5.10 Flux field
5.11 Effects of discontinuities on materials
5.12 Longitudinal Technique
5.13 Selecting the proper method of magnetization
5.14 Demagnetization procedure
5.15 Evaluation techniques
5.16 Quality control of equipment and processes
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka Cantonment, Dhaka 1216
Cell: 01927700880, email: safiq@iitsbd.com, web: www.iitsbd.com
6.
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
PT Level-I & II (20 Hour)
Introduction
Liquid Penetrant Processing
Various Penetrant Testing Methods
Liquid Penetrant Processing
Review of PT Level-I
Selection of the Appropriate Penetrant Testing Method
Inspection & evaluation of Indications
Inspection Standards and Procedures
Course Instructors

Mr. Sirajul Islam

ASNT NDT Level-III
EN ISO 9712 NDT Level-III



Mr. Mursed Jahan
ASNT NDT Level-III
Mr. Osman Gone Rana
CSWIP Welding Inspector 3.1, TWI, UK
RSO, NSA, Singapore
Mr. Noman Ullah Chowdhury
CWI (American Welding Society)
Vinarco International (Thailand) Limited.
Dr Engr Md Alamgir Hossain
Associate Professor
Department of Mechanical Engineering (ME)
Military Institute of Science and Technology (MIST
Eligibility for Examination:
 ASNT has no restrictions relative to the gender, creed, race or nationality of applicants.
 Applicants shall document the combination of education and experience in accordance with
the Level II guidelines published in Recommended Practice No. SNT-TC-1A.
 The Candidate shall agree to abide by the code of ethics for ASNT Level II personnel.
Examination Grading:
The grading of qualification examinations shall be done by ASNT Level-III certified personnel in
accordance with SNT-TC-1A regulations.
At IITS, We bring in every aspect of training. Our purpose is not just to impart knowledge,
but to handhold and help our students understand and apply what they learn.
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka Cantonment, Dhaka 1216
Cell: 01927700880, email: safiq@iitsbd.com, web: www.iitsbd.com
Guideline of Application:
Interested applicants should submit the enrolment form along with course fee (cheque or
cash), passport size 6 copy of passport size photograph, copies of certificates, experience
certificate etc. The application should be sent to the following address before the closing
date:
Md. Safiq Uddin
Technical Manager
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka cantonment, Dhaka-1216
Venue:
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka cantonment
Dhaka-1216
Application Deadline:
The last date of application is
Course fee and payment
10th December'2014
Course fee should be paid along with the enrolment form in 100& full advance. Any
candidate has to apply for minimum 02 courses. Although, IITS strongly recommend to
attend the "All courses package". The course fee is as below:
Course
Radiographic Testing (RT) Level-II
Ultrasonic Testing (UT) Level-II
Magnetic Particle Testing (MT) Level-II
Dye Penetrant Testing (PT) Level-II
All course package



Fees
18,000.00 [Taka eighteen thousand only]
18,000.00 [Taka eighteen thousand only]
10,000.00 [Taka ten thousand only]
10,000.00[Taka ten thousand only]
48,000.00 [Forty eight thousand only]
Above fees does not include any tax/vat
Fees are excluding of any kinds of T/A, D/A, Foods, Kitchen amenities.
Fees do not include any kinds of accidental or incidental demurrage of property or personnel during travel to or from course.
Upcoming course:
CSWIP 3.1 certified welding inspector. Please visit www.iitsbd.com
Industrial Inspection & Training Services (IITS)
House 162, Road 11, DOHS Mirpur, Dhaka Cantonment, Dhaka 1216
Cell: 01927700880, email: safiq@iitsbd.com, web: www.iitsbd.com