automotive - EuropeGAS

Transcription

automotive - EuropeGAS
welcome to
the WORLD
OF
automotive
LPG/CNG solutions
where
WE
are
made
in POLAND
Welcome in EuropeGAS
EuropeGAS specializes in designing, constructing, and manufacturing of electronic and mechanic
components for LPG/CNG car installations. Our flagship products are: family of controllers EG
BASICO, EG AVANCE, EG SUPERIOR, and gas reducers: EG PREMO and EG SUPREMO. Offer is
complemented by gas injectors and filters.
We place special emphasis on...
EuropeGAS factory is located in Białystok, the capital of North-Eastern Poland, which is one of the
cleanest and greenest regions, known as the "green lungs of Poland”. Here, EuropeGAS products,
from the beginning to the end, are designed and implemented to produce newest solution,
which easily pass even the most restrictive emission regulations. Due to advanced technology,
and highest production standards, they contribute to reduction of harmful substances emitted to
atmosphere.
2
...to
the manufacturing
FROM
product
design...
Performance and durability
We act in automotive industry, and set a high targets in regards to quality and innovativity of
proposed solutions
LPG/CNG conversion kits installed in vehicles are exposed to the same difficult working
conditions as an original equipment installed in factories. That is why EuropeGAS products pass
through stricter testing procedures than those required by products certification laboratories.
Thanks to this autogas conversion kits users are satisfied with no breakdowns of components
that work in frosty areas of Siberia and tropical Australian climate as well. EuropeGAS consistently
extends comprehensive offer including controller, reducer, injectors and filter.
After-sales service and technical support are the biggest advantages of the company,which build
customer's loyalty and make EuropeGAS close and long - term relationships with its partners.
3
GLOBAL
reach
EuropeGAS
USA
EuropeGAS
THAILAND
EuropeGAS
UKRAINE
EuropeGAS
GREECE
EuropeGAS
KAZAKHSTAN
EuropeGAS
CAMBODIA
EuropeGAS
RUSSIA
Think global, act local
Innovative approach to managment along with creative potencial of company make, that
products offered by EuropeGAS are requested on all leading world's markets.
To get close to our clients, EuropeGAS has opened branches in Greece, Russia, Kazakhstan,
Thailand, Cambodia, USA, and Ukraine.
4
our
STRENGTH
are people
technical
SUPPORT
research
& development
trainings
Human resources
Being successful as well in engeenering, production and selling of innovational LPG and CNG
conversion kits would not be possible without highly qualified staff. Thanks to constant
involvement, creativity and professional knowledge of EuropeGAS employees, company may
permanently extend their business activity and introduce new products all over the world.
One of HRM key strategies, applied by EuropeGAS is to constantly develop staff's professional
qualification by taking part in trainings, conferences and symposiums. Company also cooperates
with higher technical academies in relation to scietific researches and investments in talented
students.
EuropeGAS team not only has wide knowledge and experience, but also hi-tech production
machines, advanced laboratory responsible for studies and development, and fully equipped
garrage where all the LPG/CNG testing and conversion are made.
EuropeGAS clients may be sure that due to impact which is put on staff selection and personal
development, they are cooperating with professional business partner.
5
design
B 2B
laboratory
MANUFACTURING
6
perfecting
TESTING
product
name
ENCODING
AVANCE 32.4
ALL
rights
reserved
BRAND
PRODUCT
GROUP
No. No.
of of
pins cyl.
R
7
EG BASICO 24.4
EG AVANCE 48.8
EG AVANCE 32.4
EG AVANCE 48.6
BASICO
EG BASICO 24.4
The smallest of the family of EG controllers. Features with extremely simplified installing process. Active Diagram Modeinteractive callibration mode based on installation diagram, allows intuitive system callibration.
AVANCE
EG AVANCE 32.4 EG AVANCE 48.6 EG AVANCE 48.8
Small&Smart gas controller. EG AVANCE line joins the simplicity of EG BASICO, and innovative funcitions, becoming an answer
for constantly growing automotive demands.
SUPERIOR
EG SUPERIOR 48.4 EG SUPERIOR 80.6 EG SUPERIOR 80.8
EG SUPERIOR is the most technologicaly advanced line of EG controllers. It is the effect of longstanding observations,
experiences and studies made by EuropeGAS Research&Development Department.
8
EG SUPERIOR 48.4
venting
VALVE
EG SUPERIOR 80.6
EG SUPERIOR 80.8
ACTIVE DIAGRAM MODE
Interactive callibration mode is based on
installation diagram. All operations requested
for correct callibration and system diagnosis are
grouped in single, user friendly tab.
›
Integrated tutorial step by step teaches how to
use the programme.
9
Controllers
comparative
CHARACTERISTICS
BASICO 24
External dimensions
AVANCE 32
AVANCE 48
SUPERIOR 48
SUPERIOR 80
110 x 91 x 32 mm
120 x 99 x 36 mm
124 x 150 x 38 mm
124 x 150 x 38 mm
176x 150 x 38 mm
24 PIN
32 PIN
48 PIN
48 PIN
80 PIN
Composite
Composite
Aluminum
Aluminum
Aluminum
Number of possible LAMBDA connectable
0
1
2
2
2
Number of cylinders supported
4
4
4/6/8
4
4/6/8
Connector
Housing
Automatic software updates
Remining of installation service inspection
Bluetooth and WiFi connection supported
Active Diagram Mode – interactive calibration mode
Automated tuning by pressing the switch buton without need
of establishing connection with the PC
Automatic adaptation of multiplier
Calibration assistant
Sound signaling when system errors occur
Continuous maps collection
No need for connecting the RPM wires
No need for connecting the Ignition key wires
Optimized extra petrol injection
Ability to block ECU configuration after a certain period of use
Disengagement control of the fuel pump as a function of time
Engine load test (road dyno, measuring power and torque)
Programmable change of the injectors order
Oscilloscope of petrol and gas injection signals
Start&Stop system supported
Valvetronik system supported
Automated OBD errors erasing
OBD errors erasing by pressing switch buton (on request)
Fast changeover to LPG/CNG
Customizable function of holding the button
Automated forced start on gas
Pre-heating of LPG/CNG injectors
Built-in Timing Advance Processor
Built-in emulator of fuel pressure
Built-in emulator of fuel level
Fuel switch with programmable color illumination
Display controller parameters on the switch
The possibility of testing the system actuators from the
software
Integration with external GPS module
ECU diagnostic system of the gas through the fuel switch
10
EG OSCAR-N DIESEL SAS
OSCAR-N
DIESEL SAS
LPG/CNG in diesel engine is a supplementary fuel. It means, that gas do not fully replaces of Diesel, like in gasoline engines which
may run only on gas.
›
›
›
›
›
Individual gas injector for each cylinder
Gas injection synchronised with engine timing
Possibility to control up to 8 injectors
Common rail fuel pressure emulator
Gas dosing correction as a function of TPS RPM, MAP
and gas temperature
› CAN Bus available to connect with vehicle's OBD
› Protection against too high engine RPM, too high exhaust
gas temperature and engine knocking
› Integrated algorithm to measure engine power and torque
without using chasis dynamometer
› Built-in data logger with real-time clock support
System developed for diesel engines to reduce the fuel costs. It is achieved through partial replacement of Diesel fuel with
LPG/CNG.
Calibration is based on limitation of Diesel fuel dose using fuel pressure and throttle postition emulators. It causes reduction of
engine power gained from Diesel fuel. The „missing” amount is supplemented by appropriate dose of gas injection. In result engine
regains it initial characteristic( like it was only on Diesel ). Engine power control is possible due to the built-in algorithms of road
dynamometer.
11
EG PREMO
EG SUPREMO
PREMO
Stable and compact- main attributes of EG PREMO reducer. Applied solutions provide long-lasting, trouble-free work in all
conditions.
› Power: up to 150 BHP
› Reducer integrated with solenoid valve
› LPG gas phase heating
› Universal filter cartridge
› Working pressure range: 0,9-1,3 bar
› Gas inlet ø6 thread M10X1
› Gas outlet ø12
› Intake manifold pressure nozzle ø4
› Coolant elbows ø16
› Rotary connection elbows
› Integrated 4k7 temperature sensor
› Casing made of aluminium die cast
SUPREMO
EG SUPREMO reducer is designed for the cars with high power engines. Cut-Off Block System eliminates gas overgrowth effect
during engine braking. Its design provides appropriate gas temperature even in extremely low outside temperatures.
› Power: up to 230 BHP
› Reducer integrated with solenoid valve
› LPG liquid phase heating
› Filter chamber heating
› Universal filter cartridge
› Working pressure range: 0,9-1,3 bar
› Gas inlet ø8 thread M12X1
12
› Gas outlet ø16
› Intake manifold pressure nozzle ø4
› Heating liquid elbows ø16
› Rotary connection elbows
› Integrated 4k7 temperature sensor
› Casing made of aluminium die cast
EG 2000 4
EG SPINNER
EG 2000 1
EG DIVIDE
SPINNER
EG Spinner, is an innovative vaporized gas filter with universal filter cartridge. Double Spin Force system provides higher
effectiveness of particles and oil fractions disposal. 360 degree rotary elbows allow to install the filter anywhere in engine
comparment.
› Nozzles diameter: ø12, or ø16
› Rotary gas inlet and outlet nozzles
› Measurements in mm: 100 x 80 x 80
› Mounting bracket included
› Polyester filtering material
› Filtering effectiveness: 99% for particles 1µm
› Maximum working pressure: 4,5 bars
› Working temperature: from -40°C up to +120ºC
2000
EG 2000 1
EG 2000 2
EG 2000 3
EG 2000 4
EG2000 are high-end quality piston type LPG/CNG injectors. Precise manufacturing of each element guarantees repeatability of
gas dose in every single cycle.
› Single assembly possible ( with EG DIVIDE)
› Injectors assembly possible on Europegas rail
› 3 and 4 cyl EuropeGAS rails available
› Coil resistance: 1,9 Ohm
› Maximum gas flow: 175l/min
DIVIDE
EG DIVIDE 2
EG DIVIDE 3
› Opening time < 2,3 ms
› Closing time< 1,2 ms
› Maximum gas pressure: 7 bars
› Working temperature: from -40°C up to +120ºC
› Replaceable callibration nozzles
EG DIVIDE 4
Dividing bus is an essential element for the EG 2000 single assembly injectors.
› 2,3,4 cylinder version
› Inlet port: ø12mm
› Outlet nozzles: ø6mm
› Working temperature: from -40°C up to +120ºC
13
EP FLEX THERMOPLASTIC HOSE
FLEX THERMOPLASTIC HOSE
EP FTH is a high pressure synthetic hose with fittings. Designed for automotive LPG gas installation
as an excellent alternative to copper pipes.
› Perfect replacement for copper pipe
› Perfect flexibility
› Resistant to chemical factors
› Resitant to mechanical damages and scratches
› Testing pressure> 200 bars
› FTH hose D6 (ø 5,0 / 9,6 mm)
› FTH hose D8 (ø 6,5 /12,2 mm)
14
› Available in 50m rolls, or part of 2 and 6 metres with fittings
› Available fittings: 90°, 135°, 180°, for both types
› Approval numbers:
FTH D6: E20 67R-011023
FTH D8: E20 67R-011024
other
ACCESSORIES
EG DYNAMIC
Timing Advance Processor EG Dynamic is advancing the ignition moment in the
cars powered by LPG / CNG. It's being used to equalize engine power and to
improve its dynamics during work on gas.
› Scan&Learn - scanning and learning of crankshaft and camshaft position sensor
signals
› Dynamic ignition angle change in relation to RPM, TPS, and MAP pressure
› Single inductive sensor support
› Support of two digital sensors, possibility to connect in any configuration
› Adjustable automatic activation mode
› Waterproof case: 90x85 mm
EG DETECTOR
› Sensitivity knob for fast and accurate leak detection
› Time of reaction below 2 seconds for less than 40% LEL
› Sensitivity threshold 50 ppm ( for methan)
› Precise semiconductor sensor
› Headphones input
› Flexible 42 cm probe
EG CARBURETOR
› Fuel changeover switch for cars with carburettor and mechanical /
electronic injection engines
› Gas level indication
› One button configuration
› Wide range of gas level indication sensors support
EG HLS
› Contacless,Hall's effect gas level indication sensor
› Linear voltage output
› Compatible with every controller produced by EuropeGAS
EG TESTER
› Precise leakage detection in LPG/CNG installations
› Fast and easy to use
› The convenience of application, even in hard to reach areas, by using extended nozzle
› Not causing corrosion
› Environmental friendly
› Capacity: 400 ml
1.
2.
3. 10sec
4.
15
ul. Hurtowa 13, 15-399 Białystok, POLAND
tel.: +48 85 743 01 00
www.europegas.pl
export@europegas.pl
technical@europegas.pl
© No car was harmed during the creation of this catalogue.
EuropeGAS Sp. z o.o.