MotoArt - Saving History One Piece At a Time

Table Of Contents
u Desks Pg 3 - 6
u Cowling Desks Pg 7 - 8
u Conference Tables Pg 9 - 12
u Reception Desk Pg 13
u Seating Pg 14 - 16
u Credenza Pg 17 - 18
u Coffee Tables Pg 19 - 24
u Other Tables 25 - 27
1
u Misc. Pg 27 - 28
u Mirrors / Sconces Pg 29-30
u Room Dividers Pg 31-32
u Room / Office Pg 33 - 34
u Artwork Pg 35 -38
u Custom Projects Pg 39 - 40
u Moto Life Pg 41 - 44
u Aircraft Pg 45 - 46
MotoArt - Saving History One Piece At a Time
MotoArt welcomes you to our 2009 catalog.
Whether you’ve been following our work for
ten years or you are new fan to our art, we
have numerous new additions to our series
that we are pleased to share. Each of our
authentic series pieces are limited editions
based on the available air frame parts that
we can secure.
Our once small business has now blossomed
into an international affair. Over 50% of our
hand crafted art pieces are now shipped
overseas to far away locations as Russia,
Japan, Australia, Asia, The Middle East and
throughout the European continent.
Our client base for corporate work has also
increased dramatically. We are pleased to
introduce new partnerships with companies
in our portfolio including Spyker Cars, The
Boeing Company, Lockheed Martin, Kaiser
Hospitals, Microsoft, and Disney.
Please feel free to visit our web site for more
information and detailed photographs of
our products. Each month we continue to
introduce a new limited edition series. To
stay current with our work just subscribe
to our monthly newsletter by sending us an
e-mail at info@motoart.com
Blue Skies,
Dave & Donovan
We would like to share some of the most common questions that we receive at MotoArt in this introduction. Listed below
are some of these questions with our answers. Hopefully this will better give some insight into MotoArt.
Where does Motort get their parts? We find our inventory all over the world. Different yards specialize in different aircraft.
Most commercial aircraft parts come from the deserts in California and Arizona. However the older, more vintage parts are
typically found in isolated locations.
Isn’t there an abundance of old airplanes out there? Yes, and no. Since 9/11, the US Government changed the laws about
decommissioned parts. You can no longer obtain old military aircraft. Everything that leaves our Government bases must be
scrapped in very small sections, making it all unusable. Any fighter, bomber or US Cargo airplane part that we use is being
pulled from a pre-9/11 pile. These piles are growing smaller each day. Commercial Aircraft are available because the FAA
requires them to be decommissioned after so many cycles of take off & landings.
How & when did MotoArt start? Dave & Donovan who founded MotoArt, worked together in the 1990’s as architectural
sign guys. They did high-end theme work for large entertainment parks and sporting venues. One day the scrap aluminum
truck came by and he had an old beat up B-17 propeller in back of his truck. Donovan rescued it and created the first
Propeller Sculpture. The rest is history.
Didn’t I see this stuff on TV one time? Yes, MotoArt did a television series called Wing Nuts back in 2004 for Discovery
Channel. Eight one-hour episodes were produced based on our work. Unfortunately it ended when our good friend and
partner Tim Roberts passed away from a heart attack. You can still find Wing Nuts airing in all parts of the world besides
the US.
What type of clients does MotoArt have? MotoArt clients are some of the most diverse we ever could have imagined.
From top celebrities, Fortune 500 companies, self made people who reward themselves, to young adults who save money
for years to buy one of our pieces.
Why are MotoArt products so expensive? In actuality they’re not considering the process our pieces must go through to
look so good. Great cost goes into procuring the parts by finding; removing them and shipping them back to our studios. Also
�
process also entails the tedious process of sanding and polishing each piece that sometimes leads to hundreds of
hours work.
Why do you call yourself MotoArt? MotoArt was originally started to preserve all works of recycled engineered parts from
�
of industrial art.
How many pieces have you designed? To date, MotoArt has designed and fabricated nearly a hundred different series of
recycled functional art.
2
The Aircraft
B-25 Bomber
747
B-52 Stratofortress
C-119 “Flying Box Car”
707
C-130 Hercules
727
DC-3
See products made
from this plane
on pages: 5, 24, 35
See products made
from this plane
on pages: 14, 29
See products made
from this plane
on pages: 20, 29, 32
See products made
from this plane
on pages: 8, 11
45
See products made
from this plane
on pages: 7
See products made
from this plane
on pages: 6, 12, 17
23, 34
See products made
from this plane
on pages: 4, 10, 14, 33
See products made
from this plane
on pages: 26
WWW.MOTOART.COM
DC-4
L-1011
DC-9
MK-84 Bombs
F-4 Phantom
Radial Engines
See products made
from this plane
on pages: 18, 19, 26
See products made
from this plane
on page: 9
See products made
from this plane
on page: 27
See products made
from this plane
on pages: 3, 13, 24
30, 33
See products made
from this plane
on pages: 16
See products made
from this plane
on pages: 21, 22, 36
Grumman Albertross
See products made
from this plane
on page: 15
MotoArt, LLC
Sikorsky
See products made
from this plane
on pages: 45
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
46
Desks
DC-9 DESK
Fly through your workday with a DC-9 Wing Desk. This piece is fabricated
from a DC-9 “T” tail stabilizer. Surfaces are sanded and polished to a
mirror finish. The legs are 1/2”-machined aluminum, powder coated
black chrome with polished aluminum face plates. Our standard length
is 8’, but the DC-9 may be ordered cut to suit your space up to 20’
long. End surfaces are finished with 1/2” green glass Plexiglas. The
back surface is finished with 3/4” black stained hardwood. Each piece
is available with an optional 1/2” glass top supported by 1” machine
polished aluminum stand-off’s.
3
WWW.MOTOART.COM
C-130 OUTER FLAP DESK
Aviation history is alive when you pilot the C-130 Desk.
Designed using the C-130 outer flap. The original dimensions
of 24’-0” x 4’-0” can be cut to meet your own personal
space. 1’ clear Plexiglas stand off’s support 1/2” glass to
allow viewing the exquisite rivet and track detail of this piece.
Machined and powder coated aluminum “I” beam legs support
this beautiful desk.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
4
Desks
B-25 BOMBER DESK
Be one of the lucky few to own a B-25 Bomber Desk. This very limited edition series
consists of Rudders and Elevators from the famous “Mitchell” bomber. The skeleton
aluminum frame once hidden by cloth is now clearly visible and beautifully finished
with a metallic powder coat color of your choice. The desk surface is 1/2” tempered
glass with polished edges following the outline of this rare piece. The base and legs
are designed to compliment the unit and are available in hardwood stained and clear
coated to your specifications.
5
WWW.MOTOART.COM
C-119 FLAP DESK
From the side, this is a masculine unit showing the true girth of these control
services. All aged surfaces are finely sanded and are beautifully mirror polished
to accent the rivet detail. This fine piece is supported by 4” x 8” architectural
aluminum I-beams. The leg units have machined radiuses and are powder
coated with a black wrinkle finish. The wide area work surface is topped with
3/8” tempered glass following the contoured outline of the desk.
C-119 RUDDER DESK
Steer past the ordinary with the Fairchild C-119 Rudder Desk. Designed
and constructed with an authentic 1950’s C-119 rudder that has been
stripped of it’s cloth exterior, powder coated and mounted on custom
hardwood legs. The frame is covered with 1/2” tempered glass that
highlights the construction detail of these amazing frames. Custom
colors and laminates available on the leg design to accent your home or
office décor. A limited edition of 40 units available. Each unit is complete
with original manufactures tags to authenticate your piece. Available in
8’4” length or 11’ configurations.
MotoArt, LLC
Midnight Black
Black Chrome
Candy Reflective
Red
Silver
Prismatic *Metallic Granny
Blue
Orange Green
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Metallic
Purple
Tel: (310) 375 - 4531
6
Cowling Desks
LIMITED EDITION
747 COWLING RECEPTION DESK
Jumbo size your reception area with our 747
Cowling Desk. These hard to find engine cowlings
are 105” in diameter. The finish is a sanded and
mirror polished aluminum surface. An average
of 2 or 3 of these jumbos come off the line every
year, so availability is extremely limited. We
maximized the workspace on this Cowling by
designing a hardwood desktop and lower shelf
system with a 3/8” black glass working surface.
7
WWW.MOTOART.COM
KC-97 COWLING DESK
Fuel your need to own a piece of aviation history by being one of
the lucky few to own a KC-97 Cowling Desk. The KC-97 was first
produced in 1950 as a transport version of the B-29 Bomber
and primarily used as a strategic tanker aircraft for the USAF.
MotoArt has modified the cowlings by using two of the three
sections of the full engine cowl, to create a sleek custom desk.
Each has a stained and clear coated hardwood desk top, black
coated interior, and a highly polished exterior finish. Also available
in Hand Rubbed Satin finish.
MotoArt, LLC
727 VALET DESK
Fabricated from a Boeing 727 cowling nacelle that once
covered the Pratt &Whitney JT8D engines with 14,000 pounds
of thrust , is now elegant enough to put in your home or office.
Sanded and polished to a mirror finish, with a black stained
hardwood desktop, and topped with 1/4” glass. The cowling
comes with optional 1/4” casters, elevating the desktop for a
stand-up workstation.
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
8
Conference Tables
DC-4 CONFERENCE TABLE
Start off any business meeting with a conversation piece that may
accidentally dominate your conversation. The 14’ DC-4 Conference
Table is beautifully completed with the combination of mirror polished
leading edges and a vibrant powder coated treatment. The underside
paneling is finished with turned aluminum and the frame is accented
with red LED lighting. The legs are dual aluminum I-beams fused
together and powder coated, completed with polished aluminum end
caps. Also available in DC-6 and DC-3 rudders.
9
Midnight Black
Black Chrome
Candy Reflective
Red
Silver
Prismatic *Metallic Granny
Blue
Orange Green
Metallic
Purple
WWW.MOTOART.COM
C-130 INNER FLAP CONFERENCE TABLE
Let your imagination soar as you sit behind a magnificent C-130 Conference
Table. At 12’-0” long x 63” wide, the flap dimensions are truly impressive.
The ends and internal mounting points are powder coated in wrinkle black to
match the custom fabricated “I” beam legs. The 1/2” tempered glass top is
supported by 1” thick Plexiglas stand-offs, allowing a complete view of the rivet
detail and mirror polished aluminum finish.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
10
Conference Tables
727 CONFERENCE TABLE
After 30 years of service, the Boeing 727 can now land in your
conference room. This impressive horizontal stabilizer is BIG. The unit
is cut at 15’ in length with plenty of width to fill up the boardroom.
The combination of mirror polished finish and a epoxy painted surface
makes it look factory fresh. Topped with 1/2” tempered glass and
dual aluminum I-beam legs, it is sure to land you at least another 30
years of service.
11
WWW.MOTOART.COM
C-119 AILERON CONFERENCE TABLE
Make a historic statement at your next boardroom meeting with your
Aileron Conference Table. Created by using two tapered skeleton wing
ailerons that are de-clothed and powder coated with brilliant color to
accent the frame. Maximum leg clearance is achieved by using ailerons
tapered outwards. The 1/2” tempered glass top can be cut in either
a rectangular shape, or follow the contour of the ailerons. Shown with
optional decorative engine turned aluminum under paneling. The Aileron
Conference Table comfortably seats ten people.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Midnight Black
Black Chrome
Candy Reflective
Red
Silver
Prismatic *Metallic Granny
Blue
Orange Green
Tel: (310) 375 - 4531
Metallic
Purple
12
Reception Desk
WINGMAN RECEPTION DESK
Your client’s spirits will soar at the sight of MotoArt’s
Wingman Reception Desk. Fabricated from three DC-9
stabilizers and tastefully assembled with glass, hardwood
and perforated aluminum. All aluminum components are
sanded and mirror polished. All wood surfaces are stained
and clear coated. The front fascia surface is perforated
aluminum framed with hardwood. The desk surface is
protected with 1/4” black glass. The reception surface
is 1/2” clear glass with obscured sub surface diamond
etching. This desk can be created to your personal
specifications. Shown at 94”L x 45”H x 51”W
13
Seating
WWW.MOTOART.COM
C-130 NAVIGATORS CHAIR
Fly into the new year with the C-130 Navigators
Chair. These limited edition seats are each
restored, with red racing upholstery, anodized
aluminum base plates and low profile casters.
The C-130 Navigator Chairs give you additional
movement that you won’t find with our aircraft
seats including reclining, up & down and light
weight enough to scoot around in.
MotoArt, LLC
B-52 EJECTION CHAIR
Don’t like what you’re hearing in the office,
pull the lever and abort with the B-52 Ejection
Chair. Designed with sporty red upholstery, detailed
painted handles and powder-coated metal
base with heavy-duty casters. Available in
downward and upward ejection seats that
were used on both decks of the B-52.
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
14
Seating
ALBATROSS FLOAT TANK COUCH
Drift away with the Albatross Couch. Designed with
an Albatross Float Tank that has nautical lines with
tons of rivet detail. This lucky pontoon was rescued
from the bone yard and now starts its new life as an
incredible, extremely limited MotoArt couch. Weeks
of sanding, polishing, stitched red upholstery and a
lot of love completes this rare piece.
15
WWW.MOTOART.COM
F-4 EJECTION SEAT
Break the sound barrier without
ever leaving your office with the F-4
Ejection Seat. Our low riding F-4 chair
has a custom fabricated aluminum
base that is powder coated wrinkle
black, with double wheel casters. The
seat bucket is designed with either a
racing red upholstery or your favorite
color to match your décor. The
authentic F-4 bucket seat has been
left in original condition to reflect this
Vietnam era bird.
MotoArt, LLC
F-4 EJECTION BARSTOOL
The F-4 Ejection Bar Stool that is designed
using the original bucket seat from an F-4
Phantom Jet Fighter. Our workmanship
includes utilizing the original paint with
highlighted accents and high performance
upholstery. The F-4 ejection seat is supported
by custom fabricated aluminum legs that are
powder coated Reflective Silver.
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
16
Credenzas
C-119 CREDENZA
Creating a new credenza has never been more plane
cool. Using a C-119 Aileron and a Boeing 707 Damper
Valve, MotoArt designed this credenza with custom
wood cabinetry, turned aluminum laminate, internal
illumination with florescent & LED lighting, topped with
3/8” polished edge tempered glass. This beautiful
piece originally photographed, flew to the old Grumman
Factory in New York for it’s final flight.
17
WWW.MOTOART.COM
L1011 CREDENZA
GALLEY CART CREDENZA
Designed and fabricated featuring two RB-211 Rolls Royce
Engine Tail Cones. Originally used to cap the flame thrust of this
wide-body jet engine. Encased within an internal steel frame,
the cabinetry features finely handcrafted Australian Lacewood
doors. The credenza sits on machined aluminum feet fashioned
to replicate the look of pistons. The credenza top is finished with
brushed aluminum laminate and glass.
For the person on the go we present our Galley
Cart Credenza. Fitted with original brakes, this
credenza is happy in a stationary position or
ready to roll when you are. Completed with two
diamond plated airline beverage carts connected
with custom machined aluminum “I” beams. The
shelf surfaces are 3/8” tempered glass with flat
polished edges.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
18
Coffee Tables
L1011 SPINNER TABLE
This table will definitely leave you and your friends
spinning. The Jet Spinner Table is a beautiful illuminated
piece that includes a titanium L1011 spinner and a
mirror polished propeller gear dome. It illuminates softly
through a bottom plate, a top plate and a red Plexiglas
eye.
19
WWW.MOTOART.COM
707 WHEEL TABLE
Let the good times roll with the Boeing 707 Wheel Table. This great
looking table stands at 18” high and is topped with 3/8” tempered
glass 40” in diameter. Each unit is hand sanded and polished with the
Boeing insignia hubcap in black.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
20
Coffee Tables
CONTINENTAL RADIAL ENGINE
COFFEE TABLE
Ladies and Gentlemen, start your engines! Introducing
our 1930’s Continental Radial Engine Coffee Table.
Be one of the lucky few to own this spectacular piece
that is available in a very limited edition. It is sure to
be the most outstanding conversation piece in your
home, office or hangar. The Radial Engine Coffee Table
comes in pristine condition, completely rebuilt with
original parts and colors.
21
WWW.MOTOART.COM
DOUGLAS PEDAL TABLE
Control the direction of your style with the Douglas Pedal
Table. This table is designed and fabricated from the very
rare Douglas C-133 aircraft. A total of 15 units available
in this series. Each table is completely dismantled to the
last bolt, then restored to a museum quality finish. Custom
colors are available to match your decor. The table comes
complete with a 28” x 1/4” tempered glass top and stands
at 22.5”
MotoArt, LLC
JACOBS RADIAL ENGINE TABLE
The inside of a Radial Engine never looked so good. Detailed with
aluminum parts that are painstakingly polished, with chrome plated
steel gears and gold plated bronze bearings.The complicated internal
workings of this engine will be a compliment to any art collection, office,
hanger or home. Offered in a very limited edition.
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
22
Coffee Tables
C-119 COFFEE TABLE
Land yourself a new table with the C-119 Landing Gear Door. Each beautifully
polished piece accents the rivet detail of the original construction, the air scoop
is capped with aluminum perforated metal, and each custom piece is cut to
your specified length. The C-119 Table comes complete with 3/8” tempered
glass and standoff’s. Table shown is 5’ in length x 32” in width. These are a very
limited edition with this style air scoop.
23
WWW.MOTOART.COM
B-52 SPINNER TABLE
The B-52 Spinner is a deco style piece that looks “plane” cool. This
design is fabricated from an aerodynamic nose assembly gear box
cover that protruded from each of the eight Pratt & Whitney J-57
jet engines. The spinner and 3/8” aluminum supports are mirror
polished. The tempered glass is 3/8” thick and is available in your
choice of diameters up to 40”.
DC-9 WINGMAN COFFEE TABLE
Originally designed for efficient airflow and maximum control for the DC-9
“T” tail, MotoArt gives them new life as the Wingman Coffee Table. These
sleek polished aluminum units have been cut into 20” high sections to
create a unique coffee table base. This product is sold without glass for a
big cost savings in shipping. Recommended with a 48” to 60” diameter or
oval glass top that can be purchased at any local glass company.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
24
Tables
SIKORSKY TABLE
Lift yourself out of the norm with the Sikorsky S-58
Composite Cooling Fan. The S-58 was one of the largest
helicopters with a radial piston engine. Built in the
1950’s and primarily used for the US Navy for Satellite
recovery. Motoart has taken S-58 Fan Blade to new
heights, creating a unique table top that is complete with
an RB-211 Engine Shaft for the table support. Stands at
30” with a 49” - 56” glass top.
25
WWW.MOTOART.COM
DC-3 MARTINI TABLE
RB211 TABLE
The RB211 Table received its name from the
Rolls Royce Engine off the L1011 that we use the
shaft from. It is now creatively used as the stand
to elevate the jet engine turbine fan tabletop and
covered with tempered glass. The RB211 Table has
the raw look of machined metals and has thrilled the
audiences from home to abroad.
MotoArt, LLC
Propel your libations with the DC-3
MartiniTable. Designed and fabricated with
a DC-3 “toothpick” propeller and a C-130
Hercules gear dome base. These mirror
polished units sandwich a
3/4” thick glass top and
a 3/4” thick Plexiglas
bottom, both of which
are illuminated and
edge lit through an
internal light source.
The top and bottom 3/8”
aluminum mounting plates are grained
and anodized. The anodized finish is
available in several colors.
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
26
MK84 Bombs
Midnight Black
Black Chrome
MK-84 BLOCKBUSTER
BOMB TABLE
The Blockbuster Bomb Tables are constructed from
deactivated MK-84 tail fin assemblies. Each is internally
illuminated and is topped with 3/8” thick tempered glass in
40” diameter. A 1/2” stainless steel bolt secures the glass
to the bomb base. Finishes include the original rusted look or
choose from a variety of powder-coated colors.
27
Candy Reflective
Red
Silver
Prismatic *Metallic Granny
Blue
Orange Green
Metallic
Purple
MK-84 AQUA BOMB
Blow your friends away with the MK-84
Aqua Bomb. This piece will compliment
your environment and will add a little
tranquility to any home or office.
Fabricated with an MK-84 bomb tail
fin assembly, a 10-gallon Plexiglas
fish tank and a spun aluminum
dome cap. Standing at 80” tall,
the AquaBomb is completely
self-contained with a built-in
pump, filter and lighting. Fish not
included.
Misc Items
WWW.MOTOART.COM
F-80 FIGHTER WINDSCREEN
This original windscreen is from our first operational
front line fighter. Perfect for a laptop surround, to help
you fight the daily grind.
AIRLINE GALLEY BAR
The Airline GalleyBar’s are the perfect addition to any fun or retro theme room.
Each is available with optional decorative aluminum plating, custom made drawers,
including ice bucket, wine & can rack, wood cutting board, cash drawer and of
course, locking brakes.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
28
Mirrors
29
707 COWLING MIRROR
B-52 STRATOFORTRESS MIRROR
These Boeing 707 engine cowls will be a
dramatic statement on any wall. These 1950’s
era nacelles are hand sanded and polished to a
mirror finish accenting the sensuous lines of the
dual air intakes. The dimensions of this unit are
56” wide and 32’ deep. Wall mounted brackets
are provided. The B-52 Mirror fits nicely in these
units for added refection and depth. Each unit
sold separately
Light up your skies with the beautiful B-52
Mirror. Each piece is powder coated in
reflective silver measuring out at 36” in total
diameter and centered with a 20” mirror with
backlit internal illumination. Each piece is easy
to mount with all attachments included. Choice
of backlighting in gold, blue, green, red and
clear illumination.
Wall Fixtures
WWW.MOTOART.COM
FUSELAGE PICTURE FRAMES
DC-9 WALL SCONCE
Your loved ones will always be with you when displayed
in the passenger fuselage window. These frames are
cut from commercial passenger aircraft from Boeing,
Douglas and Lockheed aircraft. Each unit comes with
a hanger wire and dual Plexiglas windows to sandwich
your favorite photo. All units are stripped, sanded and
polished to a mirror finish.
Light up your way with a DC-9 Wall
Sconce. Designed with “jackscrew”
access door that is mirror polished
and illuminated with 110 volt lighting.
Only one available per aircraft, so if you
need a dozen, you better start laying off
some pilots.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
30
Fuselage Room Dividers
737 ON CASTERS
Roll a Boeing 737 Fuselage next to your
desk for a little privacy. These 737 panels
on casters are available in 5’ sections with
low profile casters. They are light weight and
perfectly balanced.
31
WWW.MOTOART.COM
707 FUSELAGE
Enjoy a sleek look for dividing rooms or as wall art. Shown here
in a 9’ length with a historic Pan Am 707 that made the 25th
anniversary flight from New York to Paris. The outside fuselage
was stripped, sanded of all imperfections and mirror polished with
the original windows still intact. This design can be customized in a
variety of options including sizes, window illumination for transparent
photographs, custom graphics and original paint schemes.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
32
Room and Office
MILE HIGH BED
Join the Mile High Club without the hassle of
going to the airport. The Mile High Bed will
lift you to new altitudes of comfort and style.
Designed and fabricated from two DC-9 rear
stabilizers and a C-130 inner flap. The bed is
11’ long x 7’-6” wide x 4’-6” high. All surfaces
are sanded and mirror polished. The bed is
accented by 1/2” Plexiglas and illuminated
with internal LED lighting. The smooth
surfaces provide a wonderful playground for
you and your co-pilot.
33
WWW.MOTOART.COM
AILERON BOOK SHELF
FLIGHT ENTERTAINMENT
High Flying Entertainment has never looked so
good. Custom designed wing aileron entertainment
centers are now available at MotoArt. Each is
created by using the skeletal frames of the C-119
aileron with a powder coat and hard wood stained
finish. Since they are made to order; sizes, colors
and options can vary including internal illumination
and custom laminates. Please e-mail us for more
details and pricing.
MotoArt, LLC
Designed with two aileron’s that are
stripped and powder coated with your
desired color, stood vertically and
mounted on custom stained & clear
coated hardwood shelves. 7’-8” total
height, width can be customized to
your specifications.
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
34
Artwork
B-25 NOSEART
Your favorite girl can now be your favorite pin-up. The B-25
Nose Art collection lets you be creator, or pick from our
on-hand selection of our favorites. Unlike other Nose Art
collections you may find in the market, these are created
MotoArt style with authentic B-25 panels from WWII.
Our artists are standing by.
35
Lighting
WWW.MOTOART.COM
RADIAL ENGINE PISTON LAMPS
PISTON DESK WATCH
MotoArt Rule #1 - No clocks! But after finding
5,000 new 1940’s era Jacobs radial engine
pistons, we had to figure out something to do with
them. Thus, was born our very cool DeskWatch.
These dead stock new pistons are machined at a
60-degree angle for easy reading.
What once torqued the engine of a 1940’s
Jacobs Radial is now available in desk lamp.
Designed with an authentic Jacobs piston and
a UL listed LED adjustable gooseneck lamp, this
lamp will shine for 100,000 hours without needing
to be replaced. Also Available are the Architects
Spring Arm Lamps with halogen lighting.
GREAT CORPORATE GIFT IDEAS
Make your company logo stand out in your
customer’s office guarantied! A gift that is so truly
unique and stylish, that it can’t help but be displayed.
With a minimum order, MotoArt can etch your
company logo on the face of each piston DeskWatch or Piston Lamp. Camera-ready art of your
logo required. Call or e-mail us for details.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
36
Large Propeller Sculptures
Propeller Blade
Convair:
B-17:
B-50:
P-47:
Corsair:
DC-6:
C-130
7’-4”
6’-6”
9’
7’-4”
7’-6”
7’-4”
7’-4”
B-25
DC-3
P-3 Orion:
Hellcat:
P-51:
Constellation:
DC-4
LARGE PROP SCULPTURES
These museum-worthy, historic
propellers find their way to MotoArt
from a variety of aircraft dating back to
WWII. Each blade undergoes dozens
and dozens of hours sanding and
then polished to a mirror finish. These
MotoArt sculptures are handsomely
mounted on a propeller “clam shell” hub,
with internal illumination. To compliment
your environment, the hub may be
powder-coated any color or chrome
37
7’2”
6’-6”
7’-3”
6’-8”
6’-4”
8’-6”
7’-4”
Small Propeller Sculptures
WWW.MOTOART.COM
SMALL PROP SCULPTURES
Smaller but just as stunning as our Large
Propeller Sculptures, the Small Prop Sculptures
will fly almost anywhere. All blades are sanded and
polished to a mirror finish and tastefully mounted
on an internal rotating cam gear. These bases are
powder coated clear to highlight etched inspection
signatures and exceptional milling.
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
38
Custom Orders
From Concept to Reality
MotoArt is pleased to offer turnkey custom design concepts and fabrication.
Our in-house capabilities include rough pencil sketch renderings to high tech
three-dimensional drawings showing you every angle of the proposed piece.
From trade show exhibits, interior design, and custom fabricated furniture,
MotoArt can provide you or your clients exactly what you envisioned and more!
SPYKER CARS EXHIBIT
39
Spyker Cars debuted their new display by MotoArt at the
Los Angeles Auto Show. The MotoArt design accents
the aviation heritage of Spyker Cars, which dates back
to 1914 when they merged with a Dutch Aircraft
Company. MotoArt is pleased to announce that Spyker
World is rolling out our exhibit package to all new Spyker
distributors. This custom exhibit package includes a
737 fuselage, C-124 cargo flooring, F-80 Information
Lecterns. Also included but not shown a C-130 Coffee
Table and Galley Cart for paint samples.
WWW.MOTOART.COM
FLIGHT SIMULATOR X
MotoArt and Microsoft teamed up to deliver a unique
and compelling design exhibit space to present the Flight
Simulator X. Touted by aviation enthusiasts as THE “as real
as it gets” flight simulation experience. Microsoft debuted
their new Flight SimX exhibit at the EAA Air Show 2006 in
Oshkosh, Wisconsin. The exhibit was created utilizing four
TBM Avenger Elevators each mounted on a set of four 737
Galley Bars to create the user space to play the game.
MotoArt, LLC
BOEING 787 FLIGHT SIMULATOR
MotoArt and the Boeing team joined forces to create this unique flight
simulator. Using a combination of vintage Boeing KC-97 cowlings and
state of the art glass control panels this unit can be seen making the
rounds at the worlds premier air shows. Function meets fun!
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
40
The Motolife
41
WWW.MOTOART.COM
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
42
The Motolife
43
WWW.MOTOART.COM
MotoArt, LLC
Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tel: (310) 375 - 4531
44
MotoArt, LLC Torrance Airport 23940 Madison Street, Torrance, CA 90505
Tele: (310) 375-4531
www.motoart.com
East Coast Sales & Showroom Gallery:
8001 Hillsborough Rd
Suites G & H
Ellicott City, Maryland 21043
Contact: Mike Rudden
301-806-6029
mike@motoart.com
European Sales & Showroom Gallery:
Arteinmotion
Reggio Emilia, Italy
Contact: Carlo Panciroli
Tél: +39-0522924056
carlo@motoart.com
West Coast Sales & Showroom:
Asia Pacific Office
23940 Madison Street,
Torrance, California 90505
Hong Kong
Asia
Contact: Piedra Stone
310-375-4531
piedra@motoart.com
Contact: Corinne
corinne@motoart.com