411T Literature

Automatic
Skin Packaging
Vacum Forming
411 T
Standard Features:
All Steel Constructing
Automatic Cycle Controls
Cantilevered Film Frame With Film Guides
Cantilevered (Movable) Oven
Full Manual Override Controls
High Efficiency, Industrial, Tubular Heating Elements
Oversized Platen – Accepts Full 18”x24” Sheets
Stainless Steel Ball Bearing Slides

Air Pressure Gauge
Balanced infrared Reflector Oven
Cantilevered Film Roll Carrrier
Dual, High Performance Vacuum Turbines
Heavy-Duty Industrial Finish
Left Or Right Hand Feed Available
Production Monitor (Counter/Push Button Reset)
Variable Vacuum Range Control
2014 HANNAN PRODUCTS CORP.
THE PROFESSIONAL’S CHOICE
The HANNAN® Automatic 411 T Skin Packaging/Vacuum Forming Machine has been engineered
for reliability, high productivity, and efficient sustainable use of space and energy.
Many of the design concepts and innovations of the HANNAN® Fully Automatic 420 T Series
machine line have been incorporated into this machine. While the 411 T may not be as automated,
it has been built to the same exacting standards resulting in maximum operator visibility of the
packaging/vacuum forming area and easier operation when loading, unloading, or vacuum forming.
The HANNAN® 411 T is designed with standard features such a fully cantilevered oven, film frame
and film roll carrier allow for smooth, efficient production flow and high visibility during the loading
sequence. The heavy-duty high efficiency tubular heating elements allow for long life and immediate
heat (No “Heat-Up” or “Cool-Down” Cycles) to wait for. And with a user friendly control system
minimum of maintenance and operator skill is needed saving your company time and money.
HANNAN® also manufactures printed stock and custom skin packaging cards and supplies a variety
of skin packaging films that will slash the cost and complexity of your next packaging/forming
production project.
Packaging Made Easy / Packaging Made in America
STANDARD FEATURES:
OPERATION SEQUENCE:
♦Cantilevered Film Frame With Film Guide
♦Balanced Infrared Reflector Oven
♦ Stainless Steel Ball Bearing Slides
♦Cantilevered (Movable) Oven
♦High Efficiency, Industrial, Tubular Heating Elements
♦Cantilevered Film Roll Carrier
♦Left Or Right Hand Feed Available
♦Oversized Platen - Accepts Full 18” x 24” Sheets
♦Heavy Duty Industrial Finish
♦ Variable Vacuum Range Control
♦Production Monitor (Counter/Push Button Reset)
♦Air Pressure Gauge
♦Dual, High-Performance Vacuum Turbines
♦Automatic Cycle Controls
♦Full Manual Override Controls
SPECIFICATIONS:
1 - Place master card (with products
in position) on platen.
2 - Pull out the oven initiating the automatic heat cycle.
a. Oven heats film.
b. Film frame lowers and vacuum
turbines are activated.
c. Film is sealed to master sheet.
Substrate Size ---------------------------------------------------- 18” X 24”
Film Thickness ------------------------------------------- 1 MIL TO 1/8”
Film Roll Size ------------ STANDARD 20” WIDE X 3” CORE
Electrical ---------------------------------------------- 220V 1 PH 60 HZ
Shipping Weight -------------------------------------------------- 650 LBS.
** 40 PSI LOW VOLUME AIR SUPPLY REQUIRED
OPTIONS:
♦ Accessory Work Table
♦ Blister Blow-Off
♦ Hot Wire Cut-Off
♦ 2 Roll Film Carrier
♦ Special Electrics
♦ Variable Heat Range
* The 411 is also available in a “C” model for heavier
vacuum forming applications.
Made in the U.S.A.
3 - When film is completely sealed,
push oven back, automatically
turning off vacuum turbines. Open
film clamp. Pull sealed master
card to the right hand side of
frame and re-clamp frame. Film is
now pre-loaded for next cycle.
4 - Push frame “up” button and machine is ready for next cycle.
DIMENSIONS (LOW PROFILE):
Working Height ------------------------------------------------------------ 32”
O/A Height --------------------------------------------------------------- 46.5”
O/A Width ---------------------------------------------------------------- 46.5”
O/A Depth -------------------------------------------------------------------- 48”
Min. Wall Clearance ---------------------------------------------------- 24”
HANNAN PRODUCTS CORPORATION
220 N. SMITH AVENUE, CORONA, CA. 92880
TELEPHONE: (951) 735-1587 / (800) 954-4266
FAX: (951) 735-0827
WWW.HANNANPAK.COM SALES@HANNANPAK.COM