Tannoy

Transcription

Tannoy

Di8 DC
Product Description
Designed for a wide variety of sound reinforcement applications, the Tannoy Di8 DC is a high
performance, ultra compact surface mount weather resistant loudspeaker. A full bandwidth
loudspeaker designed for commercial, professional and residential applications where environment
durability and high quality sonic performance are required. Indoor or outdoor, these speakers are
ideally suited to stereo or monaural background or foreground music systems in such applications
as diverse as theme parks, retail premises, restaurants and cafés, corporate audio visual, residential
developments and houses of worship.
Renowned for its extraordinary power handling, high sensitivity, extended frequency response and
very low distortion, Tannoy’s Dual Concentric™ provides a wide and controlled dispersion ensuring
optimum coverage. By placing the high frequency drive unit physically inside the low frequency
driver, Tannoy engineers have created a true point source that exhibits constant directivity and
unparalleled linearity. Perfect for this type of application, the driver system generates a spherical
wave front unaffected by energy loss at the crossover frequency in either vertical or horizontal
planes; allowing highly flexible speaker placement on the wall or ceiling with no compromise to
performance and vocal intelligibility.
The Dual Concentric™ driver in the Di8 DC uses a 200mm (8.00") complex multi fibre paper pulp
mix for the mid bass cone to achieve optimum acoustic performance, while a comprehensive resin
treatment process ensures the materials weather resistance. The concentrically positioned 25mm
(1.00") HF unit has a ferrofluid cooled titanium dome, with a neodymium magnet system, equipped
with dynamic high frequency protection.
Available in textured black or white painted finish with matching rubber trims, the
outstandingly durable and scuff resistant, high impact polystyrene (HIPS) Di enclosure is weather
resistant, rated IP64 to EN60529 (IEC529); a construction fully optimised for
consistent performance in adverse conditions indoors or out.
Modification is possible by application of alternative colour trims. Two standard colour trim
options are available from stock; enabling black or white product to be supplied factory pre-fitted with
either red or blue trims.
Other trim colours can also be created to suit specific requirements, but only as a special order
customisation subject to minimum order quantities. Primarily aimed at corporate branding
applications, this aesthetic flexibility will also enable colour coordination for larger installs.
Transformer version - the Di8 DCt
The Di8 DCt model option is equipped with an internally mounted low insertion loss line
transformer for 70V or 100V distributed sound applications. Wattage taps are easily configurable to
the following settings via an easily accessible rotary tapping switch, which is bottom panel mounted
under the rubber trim.
70V: 60W / 30W / 15W / 7.5W / OFF & Low impedance operation
100V: 60W / 30W / 15W / OFF & Low impedance operation
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Features
• 200mm (8.00”) Dual Concentric™ transducer for
high performance and durability
• 90 degree controlled conical dispersion for optimum
coverage and forward gain
• Weather resistant rated IP64 to EN60529 (IEC529)
• High power handling and extended bandwidth
• Phase coherent design for superior vocal articulation
and music reproduction
• Yoke bracket supplied, optional accessories include
pole mount adaptor and the unique K-Ball™ pre-wired,
fully adjustable multi-angle bracket
• Five year loudspeaker warranty
Transformer version - the Di8 DCt
• Low insertion loss 60W transformer for a more
powerful and dynamic performance in distributed
audio installations
• Bottom mounted switch for line voltage settings
Applications
• Indoor or outdoor commercial, professional and
residential installations
• High level stereo or monaural background or
foreground music and speech paging systems
• Theme parks
• Theme bars
• Reception / waiting rooms
• Airports, convention centres and hotels
• Business music systems
• Boardrooms and offices
• Cruise ships
• Retail outlets and shopping malls
• Restaurants and cafes
• Corporate audio visual
• Residential developments
• Houses of worship
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Di8 DC data file // issue 1.06 // 15.01.08
Di8 DC
TECHNICAL SPECIFICATIONS
System
Frequency Response (-3dB)
Frequency Range (-10dB) (1)
(1)
Di8 DC /Di8 DCt
Construction
Enclosure
65Hz - 30kHz
53Hz - 35kHz
Grille
System Sensitivity (1W @1m) (2) 91dB (1W = 2.83V for 8 Ohms)
Dispersion (-6dB)
Driver Complement
Low Frequency
1x 200mm (8.00") Dual Concentric
constant directivity driver with
multi fibre paper pulp cone
25mm (1.00") titanium dome with
neodymium magnet system
TM
High Frequency
Crossover
Directivity Factor (Q)
Rated Maximum SPL (2)
Average
Peak
Power Handling
Average
Programme
Peak
7 averaged 1kHz to 10kHz
Dimensions
111dB
117dB
NET Weight
Nominal Impedance
8 Ohms
Distortion
10% Full Power (8.5V)
250Hz
1kHz
10kHz
2nd Harmonic
1.55%
0.41%
1.2%
PART NUMBER
8001 4120
8001 4121
8001 4130
8001 4131
Tannoy Deutschland
Tannoy France
1 x K-Ball™ Bracket Socket,
2 x M8 yoke bracket inserts
Yoke bracket
Pole mount adaptor, multi angle K-Ball™
pre-wired bracket
404.3 x 260 x 260.3mm (H x W x D)
(15.92 x 10.24 x 10.25”)(H x W x D)
7.0kg (15.87lbs)
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
3rd Harmonic
0.42%
0.63%
0.65%
3rd Harmonic
0.48%
0.47%
0.13%
COLOUR
MODEL NAME
Di8 DC
Di8 DC
Di8 DCt
Di8 DCt
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Euroblock type removable locking connector
with screw terminals with "loop through" facility
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Di8 DCt - Transformer Taps (bottom rotary switch)
70V
60W / 30W / 15W / 7.5W / OFF &
Low Impedance operation
100V
60W / 30W / 15W / OFF &
Low Impedance operation
2nd Harmonic
0.43%
0.07%
0.55%
Optional
Accessories
Textured Black or White paint
(custom trim colours can be supplied pre-fitted
to special order - minimum order quantity applies)
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
Recommended Amplifier Power 180W @ 8 Ohms
Ordering Information
Fittings
Supplied
Accessories
90W
180W
360W
1% Full Power (2.7V)
250Hz
1kHz
10kHz
Connectors
1.5kHz - 2nd order LF,
2nd order HF
(with dynamic HF protection)
5.5 averaged 1kHz to 10kHz
Directivity Index (DI)
Steel, with weather resistant coating
Finish
90 degrees conical
High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
Black
White
Black
White
PACKED QUANTITY
2
2
2
2
PACKED WEIGHT
8.25kg (18.19lbs)
8.25kg (18.19lbs)
9.50kg (20.94lbs)
9.50kg (20.94lbs)
Di8 DC
PERFORMANCE MEASUREMENTS
1m on-axis frequency
q
y response
p
100
SPL, 1W/1m (dB)
90
80
70
60
50
ANECHOIC
FREQUENCY
RESPONSE
10
100
1000
10000
frequency
(Hz)
F
100000
1m on-axis frequency response
40
Impedance (ohms)
30
20
10
0
10
100
IMPEDANCE
frequency
(Hz)
F
1000
10000
Horizontal Off-Axis Responses
100
90
Level (dB)
80
0 deg
10 deg
20deg
30deg
40deg
70
60
OFF AXIS
RESPONSE
Tannoy Deutschland
Tannoy France
50
10
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
100
1000
F
frequency
(Hz)
10000
100000
Di8 DC
PERFORMANCE MEASUREMENTS
Beamwidth vs Frequency
360
330
300
270
Degrees
Degrees
240
210
180
150
120
90
60
30
0
100
1000
Ffrequency (Hz)
BEAMWIDTH
DI vs Frequency
y
100
Q
10
1
100
1000
F frequency (Hz)
DIRECTIVITY INDEX
Tannoy Deutschland
Tannoy France
10000
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
10000
Di8 DC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100Hz
125Hz
160Hz
200Hz
0
330
30
0
330
-12
300
60
300
-36
-48
90
-48
270
630Hz
630 Hz
800Hz
800 Hz
1kHz
1 kHz
1.25kHz
1.25 kHz
0
30
0
330
60
300
90
1
0
0
-48
270
4kHz
5kHz
6.3kHz
8kHz
90
1
0
30
330
-12
0
10kHz
12.5kHz
16kHz
20kHz
30
-12
60
-24
300
-36
270
60
-36
-48
300
30
0
-24
-36
330
1.6kHz
1.6
kHz
2
2kHz
kHz
2.5
2.5kHz
kHz
3.15
3.15kHz
kHz
-12
-24
270
90
0
-12
300
60
-24
-36
330
30
0
-12
-24
270
250 Hz
315 Hz
400 Hz
500 Hz
0
-24
60
-36
-48
90
270
-48
90
1
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di8 DC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100Hz
125Hz
160Hz
200Hz
0
330
30
0
330
-12
300
60
300
-36
-48
90
-48
270
630Hz
630
Hz
800Hz
800
Hz
1kHz
1
kHz
1.25kHz
1.25
kHz
0
30
0
330
60
300
90
1
0
0
-48
270
4kHz
5kHz
6.3kHz
8kHz
90
1
0
30
330
-12
0
10kHz
12.5kHz
16kHz
20kHz
30
-12
60
-24
300
-36
270
60
-36
-48
300
30
0
-24
-36
330
1.6kHz
1.6
kHz
2kHz
2
kHz
2.5kHz
2.5
kHz
3.15kHz
3.15
kHz
-12
-24
270
90
0
-12
300
60
-24
-36
330
30
0
-12
-24
270
250Hz
315Hz
400Hz
500Hz
0
-24
60
-36
-48
90
270
-48
90
1
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di8 DC
DIMENSIONAL SKETCHES
R400.0mm
(R15.75”)
8°
191.0mm
(7.52”)
260.3mm
(10.25”)
R550mm
(R21.65”)
260.0mm
(10.24”)
404.3mm
(15.92”)
202.2mm
(97.96”)
SUPPLIED MOUNTING BRACKET
Di8 DCt Yoke
406.0
406.0mm
[15.98"]
(15.98”)
R15.0
R15.0mm
[R0.59"]
(R0.59”)
217.0mm
217.0
(8.54”)
[8.54"]
165.0
165.0mm
[6.50"]
(6.50”)
170.0
170.0mm
[6.69"]
(6.69”)
35.0
35.0mm
[1.38"]
(1.38”)
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
R11.0
R11.0mm
[R0.43"]
(R0.43”)
70.0
70.0mm
[2.76"]
(2.76”)
6.0mm
6.0
(0.24”)
[0.24"]
Di8 DC
OPTIONAL ACCESSORIES
K-Ball™ Bracket
47.7
47.7mm
(1.88”)
[1.88"]
93.2
93.0mm
(3.67”)
[3.67"]
137.9mm
137.9
(5.43”)
[5.43"]
155.0mm
155.0
(6.10”)
[6.10"]
65.0
65.0mm
[2.56"]
(2.56”)
Pole Mount Adapter
240.0
240.0mm
[9.45"]
(9.45”)
Ø22.0
Ø22.0mm
[Ø0.87"]
(Ø0.87”)
70.0
Ø70.0mm
(Ø2.76”)
[2.76"]
Pole Mount Adapter with Yoke bracket
Ø7.0
Ø7.0mm
[Ø0.28"]
(Ø0.28”)
40.0
40.0mm
[1.57"]
(1.57”)
Ø152.4mm
Ø152.4
(Ø6.00”)
[Ø6.00"]
Ø228.6
Ø226.6mm
[Ø9.00"]
(Ø9.00”)
Ø76.2mm
Ø76.2
(Ø3.00”)
[Ø3.00"]
Ordering Information
PART NUMBER
8001 4190
8001 4191
8001 4600
8001 4601
Tannoy Deutschland
Tannoy France
COLOUR
MODEL NAME
K-Ball™ Bracket
K-Ball™ Bracket
Pole Mount Adapter
Pole Mount Adapter
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Pole Mount Adapter with K-Ball™ bracket
Black
White
Black
White
PACKED QUANTITY
1
1
1
1
Di8 DC
Architectural specifications Di8 DC
The weather resistant, full bandwidth surface mount speaker system shall consist of a 200mm (8.00") full range, point source Dual Concentric™ transducer
mounted in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure rated IP64 to EN60529 (IEC529). The protective grille
shall be constructed from steel with a weather resistant coating.
Performance of the Di8 DC surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of
90 degrees (-6dB). Frequency response measured on axis shall be 53Hz - 35kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at
1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 91dB (1W = 2.83V for 8 Ohms). Long term power handling capacity as defined in
EIA-426B test shall be 90W, recommended amplifier power 180W. The nominal system impedance shall be 8 Ohms (in low impedance setting).
A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination
with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by
a tie back point.
The dimensions shall not exceed 404.3 x 260 x 260.3mm (15.92 x 10.24 x 10.25”).
The surface mount speaker system shall be the.....Di8 DC.
Architectural specifications Di8 DCt
The weather resistant, full bandwidth surface mount speaker system shall consist of a 200mm (8.00") full range, point source Dual Concentric™ transducer
mounted in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille
shall be constructed from steel with a weather resistant coating.
Performance of the Di8 DCt surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of
90 degrees (-6dB). Frequency response measured on axis shall be 53Hz - 35kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at
1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 91dB (1W = 2.83V for 8 Ohms). Long term power handling capacity as defined in
EIA-426B test shall be 90W, recommended amplifier power 180W. The nominal system impedance shall be 8 Ohms (in low impedance setting).
The Di8 DCt speaker system shall be equipped with a 60W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with
60W / 30W / 15W / 7.5W* Watt, OFF and Low Impedance taps available. An easily accessible rotary switch located under the rubber trim on the bottom of
the cabinet shall be available for selecting transformer and low impedance settings.
A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination
with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by
a tie back point.
The dimensions shall not exceed 404.3 x 260 x 260.3mm (15.92 x 10.24 x 10.25”).
The surface mount speaker system shall be the.....Di8 DCt.
*70 Volt only
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di8 DC
NOTES
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di8 DC
NOTES
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di8 DC
NOTES
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473

Tannoy

Transcription

Similar documents

Di5

PRLS

persetujuan antara pemerintah republik indonesia dan pemerintah

Alu-Fab - FoldNSlide

E-mHrt_B Tt-\irqT. - Chhattisgarh Horticulture

KOHALA r MUZAFFAR/ABAD -?-II

Kementerian Pendidikan dan Kebudayaan Republik Indonesia dan

Exemption of Biomass Power Plants of capacity less than 15 MW

Senate FY16 Transportation HUD Appropriations Bill Text Part 3

View

INSTRUCTION MANUAL Adjustable Height Nucleic Acid Sequencing Systems Single Units

GLOBAL-FINDINGS.COM GROUP LTD.

Sundara Kandam