Di5

Transcription

Di5

Di5
Product Description
Designed for a wide variety of sound reinforcement applications, the Tannoy Di5 is a high
performance, ultra compact surface mount weather resistant loudspeaker. A full bandwidth
loudspeaker designed for commercial, professional and residential applications where
environment durability and high quality sonic performance are required. Indoor or outdoor,
these speakers are ideally suited to stereo or monaural background or foreground music
systems in such applications as diverse as theme parks, retail premises, restaurants and
cafés, corporate audio visual, residential developments and houses of worship.
Equipped with Tannoy’s unique and exclusive point source ICT™ 110mm (4.50") drive unit,
the Di5 delivers an acoustic performance of outstanding clarity, definition and detail.
The point source configuration of the Tannoy ICT™ driver’s mid-bass and tweeter sections
ensures a wide and controlled dispersion for optimum coverage; this while avoiding the
massive loss of energy in the vertical plane, at the crossover frequency, inherent in
two-way discrete designs. The ICT™ (Inductive Coupling Technology) drive unit also
addresses the two most common component failures experienced in background music
and sound reinforcement systems, the tweeter and the crossover reliability. The use of a
wireless electromagnetic tweeter means that no crossover is required in the design; this
therefore ensures that an ICT™ unit is exceptionally reliable and therefore ideal for
applications where constant heavy usage is the norm. This aluminium high frequency
dome has a deep drawn skirt that sits on the inside of the low frequency voice coil in the
same magnetic gap. The skirt is like a single shorted turn that is induced with high
frequency information generated by the low frequency voice coil, which is fed a full
bandwidth signal. The mineral loaded polypropylene cone material and nitrile rubber
surround further enhance durability and long-term reliability.
Available in textured black or white painted finish with matching rubber trims, the
outstandingly durable and scuff resistant, high impact polystyrene (HIPS) Di enclosure is
weather resistant,rated IP64 to EN60529 (IEC529); a construction fully optimised for
consistent performance in adverse conditions indoors or out.
Modification is possible by application of alternative colour trims. Two standard colour trim
options are available from stock; enabling black or white product to be supplied factory
pre-fitted with either red or blue trims.
Other trim colours can also be created to suit specific requirements, but only as a special
order customisation subject to minimum order quantities. Primarily aimed at corporate
branding applications, this aesthetic flexibility will also enable colour coordination for
larger installs.
Transformer version - the Di5t
The Di5t model option is equipped with an internally mounted low insertion loss line
transformer for 70V or 100V distributed sound applications. Wattage taps are easily
configurable to the following settings via an easily accessible rotary tapping switch, which
is top panel mounted under the rubber trim.
70V: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation
100V: 30W / 15W / 7.5W / OFF & Low Impedance operation
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Features
• 110mm (4.50”) ICT™ transducer for high
performance and durability
• 90 degree controlled conical dispersion for optimum
coverage and forward gain
• Weather resistant rated IP64 to EN60529 (IEC529)
• High power handling and extended bandwith
• Phase coherent design for superior vocal articulation
and music reproduction
• No crossover required, ensuring better phase,
impedance and sensitivity response and
increased durability
• Yoke bracket supplied, optional accessories include
pole mount adaptor and the unique K-Ball™ pre-wired,
fully adjustable multi-angle bracket
• Five year loudspeaker warranty
Transformer version - the Di5t
• Low insertion loss 30W transformer for an more
powerful and dynamic performance in distributed
audio installations
• Top mounted switch for line voltage settings
Applications
• Indoor or outdoor commercial, professional and
residential installations
• High level stereo or monaural background or
foreground music and speech paging systems
• Theme parks
• Theme bars
• Reception / waiting rooms
• Airports, convention centres and hotels
• Business music systems
• Boardrooms and offices
• Cruise ships
• Retail outlets and shopping malls
• Restaurants and cafes
• Corporate audio visual
• Residential developemnts
• Houses of worship
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Di5 data file // issue 1.06 // 14.01.08
Di5
TECHNICAL SPECIFICATIONS
System
Frequency Response (-3dB)
(1)
Frequency Range (-10dB) (1)
Di5 / Di5t
Construction
Enclosure
90Hz - 25kHz
80Hz - 30kHz
System Sensitivity (1W @1m) (2) 88dB (1W = 2.45V for 6 Ohms)
Dispersion (-6dB)
90 degrees conical
High Frequency
1 x 110mm (4.50”)
Mineral loaded polypropylene
25mm (1.00”) ICT™
Directivity Factor (Q)
5.3 averaged 1kHz to 10kHz
Driver Complement
Low Frequency
Crossover
7kHz Inductively coupled
Directivity Index (DI)
Rated Maximum SPL (2)
Average
Peak
Power Handling
Average
Programme
Peak
6.6 averaged 1kHz to 10kHz
105dB
111dB
Distortion
10% Full Power (5.5V)
250Hz
1kHz
10kHz
8001 4010
8001 4011
8001 4020
8001 4021
Di5
Di5
Di5t
Di5t
Tannoy Deutschland
Tannoy France
Yoke bracket
Pole mount adaptor
K-Ball™ pre-wired multi angle bracket
240.7 x 155 x 162mm (H x W x D)
(9.47 x 6.1 x 6.38”) (H x W x D)
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
3rd Harmonic
0.26%
0.19%
0.35%
3rd Harmonic
0.09%
0.11%
0.298%
COLOUR
Black
White
Black
White
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
2.7kg (5.94lbs)
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
Ordering Information
MODEL NAME
Optional
Accessories
1 x K-Ball™ bracket socket
2 x M8 yoke bracket inserts
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
2nd Harmonic
0.65%
0.144%
0.52%
PART NUMBER
Supplied
Accessories
Euroblock type removable locking connector with
screw terminals with "loop through" facility
6 Ohms
2nd Harmonic
2.00%
0.53%
2.5%
1% Full Power (1.73V)
250Hz
1kHz
10kHz
Fittings
Textured black or white paint
(custom trim colours can be supplied pre-fitted
to special order - minimum order quantity applies)
NET Weight
30W / 15W / 7.5W / 3.75W / OFF
& low impedance operation
30W / 15W / 7.5W / OFF
& low impedance operation
100V
Connectors
Steel, with weather resistant coating
50W
100W
200W
Di5t - Transformer Taps (top rotary switch)
70V
Finish
Dimensions
Recommended Amplifier Power 100W @ 6 Ohms
Nominal Impedance
Grille
High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
PACKED
QUANTITY
2
2
2
2
PACKED WEIGHT
3.0 (6.61lb)
3.0 (6.61lb)
3.5kg (7.72lbs)
3.5kg (7.72lbs)
Di5
PERFORMANCE MEASUREMENTS
1m on-axis frequency response
100
SPL, 1W/1m (dB)
90
80
70
60
50
ANECHOIC
FREQUENCY
RESPONSE
10
100
1000
10000
frequency (Hz)
100000
1m on-axis frequency response
14
12
Impedance (ohms)
10
8
6
4
2
0
10
100
IMPEDANCE
frequency (Hz)
1000
10000
HorizontalOff-Axis
off-axis Responses
response
Horizontal
100
90
Level (dB)
80
0 deg
10 deg
20deg
30deg
40deg
70
60
OFF AXIS
RESPONSE
Tannoy Deutschland
Tannoy France
50
10
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
100
1000
frequency (Hz)
10000
100000
Di5
PERFORMANCE MEASUREMENTS
Beamwidth vs Frequency
360
330
300
270
Degrees
g
240
210
180
150
120
90
60
30
0
100
1000
frequency (Hz)
BEAMWIDTH
DI vs Frequency
100
Q
Q
10
1
100
1000
F
frequency
(Hz)( H )
DIRECTIVITY INDEX
Tannoy Deutschland
Tannoy France
10000
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
10000
Di5
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100 Hz
125 Hz
160 Hz
200 Hz
0
330
30
0
330
-12
300
60
300
-36
90
-48
1
0
30
0
270
630 Hz
800 Hz
1 kHz
1.25 kHz
330
60
300
90
1
0
0
270
4 kHz
5 kHz
6.3 kHz
8 kHz
30
330
1
0
10 kHz
12.5 kHz
16 kHz
20 kHz
30
-12
60
-24
300
-24
60
-36
90
-48
270
1
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
90
0
-36
Tannoy Deutschland
Tannoy France
60
-48
-12
270
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
-36
-48
300
30
0
-24
-36
330
1
0
-12
-24
270
90
-48
-12
300
60
-24
-36
330
30
0
-12
-24
270
250 Hz
315 Hz
400 Hz
500 Hz
0
90
-48
1
Di5
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100Hz
125Hz
160Hz
200Hz
0
330
30
0
330
-12
300
60
300
-36
90
-48
30
0
270
330
60
300
-36
90
-48
1
0
0
30
270
4kHz
5kHz
6.3kHz
8kHz
330
0
30
10 kHz
12.5 kHz
16 kHz
20 kHz
-12
300
60
-24
-24
60
-36
90
-48
270
1
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
1
0
-36
Tannoy Deutschland
Tannoy France
90
-48
-12
270
60
-24
-36
300
30
0
-12
-24
330
1.6kHz
1.6
kHz
2kHz
2
kHz
2.5kHz
2.5
kHz
3.15kHz
3.15
kHz
0
-12
270
90
-48
630Hz
630 Hz
800Hz
800 Hz
1kHz
1 kHz
1.25kHz
1.25 kHz
0
300
60
-24
-36
330
30
0
-12
-24
270
250Hz
315Hz
400Hz
500Hz
0
90
-48
1
Di5
DIMENSIONAL SKETCHES
R165.0mm
(R6.50”)
7°
102.0mm
(4.02”)
162.0mm
(6.38”)
R300.0mm
(R11.81”)
155.0mm
(6.10”)
240.7mm
(9.47”)
130.4mm
(5.13”)
SUPPLIED MOUNTING BRACKET
Di5 Yoke
241.0
241.0mm
[9.49"]
(9.49”)
R15.0mm
[R0.59"]
(0.59”)
R15.0
123.0mm
123.0
(4.84”)
[4.84"]
54.0
54.0mm
[2.13"]
(2.13”)
85.0mm
[3.35"]
3.35”
90.0mm
[3.54"]
3.54”
90.0
85.0
6.0
6.0mm
[0.24"]
(0.24”)
Ø22.0mm
ø
(Ø0.87”)
35.0
35.0mm
[1.38"]
1.38”
Di5 YOKE
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di5
OPTIONAL ACCESSORIES
K-Ball™ Bracket
47.7
47.7mm
(1.88”)
[1.88"]
93.2
93.0mm
(3.67”)
[3.67"]
137.9mm
137.9
(5.43”)
155.0mm
155.0
(6.10”)
[6.10"]
[5.43"]
65.0mm
65.0
(2.56”)
[2.56"]
Pole Mount Adapter
240.0
240.0mm
[9.45"]
(9.45”)
Ø22.0
Ø22.0mm
[Ø0.87"]
(Ø0.87”)
70.0
Ø70.0mm
(Ø2.76”)
[2.76"]
Pole Mount Adapter with Yoke bracket
Ø7.0
Ø7.0mm
[Ø0.28"]
(Ø0.28”)
40.0
40.0mm
[1.57"]
(1.57”)
Ø152.4mm
Ø152.4
(Ø6.00”)
[Ø6.00"]
Ø228.6
Ø226.6mm
[Ø9.00"]
(Ø9.00”)
Ø76.2mm
Ø76.2
(Ø3.00”)
[Ø3.00"]
Ordering Information
PART NUMBER
8001 4190
8001 4191
8001 4600
8001 4601
Tannoy Deutschland
Tannoy France
COLOUR
MODEL NAME
K-Ball™ Bracket
K-Ball™ Bracket
Pole Mount Adapter
Pole Mount Adapter
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Pole Mount Adapter with K-Ball™ bracket
Black
White
Black
White
PACKED QUANTITY
1
1
1
1
Di5
Architectural specifications Di5
The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted
in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be
constructed from steel with a weather resistant coating.
Performance of the Di5 surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees
(-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in
an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B
test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting).
A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination
with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by
a tie back point.
The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”).
The surface mount speaker system shall be the.....Di5.
Architectural specifications Di5t
The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted
in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be
constructed from steel with a weather resistant coating.
Performance of the Di5t surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees
(-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in
an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B
test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting).
The Di5t speaker system shall be equipped with a 30W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with
30 / 15 / 7.5 / 3.75* Watt, OFF and Low Impedance taps available. An easily accessible rotary switch located under the rubber trim on the top of the cabinet
shall be available for selecting transformer and low impedance settings.
A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination
with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by
a tie back point.
The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”).
The surface mount speaker system shall be the.....Di5t.
*70 Volt only
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di5
NOTES
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di5
NOTES
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
Di5
NOTES
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473

Di5

Transcription

Similar documents

Tannoy

PRLS

persetujuan antara pemerintah republik indonesia dan pemerintah

VX 8 - DV2

Alu-Fab - FoldNSlide

SERVICE MANUAL

E-mHrt_B Tt-\irqT. - Chhattisgarh Horticulture

KOHALA r MUZAFFAR/ABAD -?-II

Departemen Pertanian Republik Indonesia dan Departemen Pertani

Kementerian Pendidikan dan Kebudayaan Republik Indonesia dan

INSTRUCTION MANUAL Adjustable Height Nucleic Acid Sequencing Systems Single Units

GLOBAL-FINDINGS.COM GROUP LTD.