Transport and Installation Guide

ProNovia Basic Library
Transport and Installation Guide
www.pronovia.com
Imprint
Legal Notices
Issue January 2016 / A.00.0
All rights reserved.
Copyright and Usage Rights
This document is copyrighted and may not be modified without the prior written consent of the publisher.
Reproduction and distribution is permitted only with the following legal notice:
© 2016 ProNovia AG
Changes and updates without notice.
Microsoft is a registered trademark of Microsoft Corporation.
SAP is registered trademark of SAP AG.
ProNovia is a registered trademark of ProNovia AG.
Disclaimer
ProNovia AG assumes no responsibility for any typographical, technical, or other inaccuracies, errors, or
omissions and their consequences. Liability in respect of the software described herein, please see our
software terms.
Publisher / Contact
ProNovia AG
P.O. Box
CH-8180 Bülach
Fon +41 44 860 13 06
Fax +41 44 860 13 07
Website www.pronovia.com
E-Mail info [at] pronovia.com
2
Table of Content
1
Introduction
..............................................................................................4
1.1
Other
..................................................................................................................................4
documents
1.2
Prerequisites
..................................................................................................................................4
1.3
Abbreviations
..................................................................................................................................4
1.4
Symbols
..................................................................................................................................5
in this document
2
Installation
..............................................................................................6
of ProNovia Basic Library
2.1
Introduction
..................................................................................................................................6
2.2
Preparations
..................................................................................................................................6
3
Import ..............................................................................................7
3.1
Import
..................................................................................................................................7
Steps
4
De-installation
..............................................................................................9
ProNovia AG, P.O. Box, CH-8180 Bülach
3
UTI
Introduction
1
Introduction
This manual describes the first installation of ProNovia Basic Library on a SAP system.
Further installations of ProNovia Basic Library as well the installation of other ProNovia products can
afterwards be made using ProNovia's central product management and is described in detail in the
ProNovia UTI Customizing manual.
1.1
Other documents
All relevant and available documents are found in the ProNovia Support Center: http://support.pronovia.ch.
1.2
Prerequisites
Prerequisites for using ProNovia products:
· ProNovia products to be used must be installed and setup correctly on the relevant systems.
· ProNovia products must be properly integrated, activated and configured. Details see document ProNovia
Basic Library, Integration and Enhancement Manual.
· To use ProNovia products, valid licenses for each product must be loaded on each system. Details see
document ProNovia Basic Library, Integration and Enhancement Manual.
· The necessary permissions for the display and maintenance of SAP objects must be present.
1.3
Abbreviations
Some abbreviations used in the ProNovia documents:
Abbreviation
Stands for
ADM
ProNovia SAP PLM Administrator
AFW
ProNovia Application Framework
C5C
ProNovia SAP PLM CATIA-V5-Conversion (CENIT)
CHD
ProNovia SAP DMS ChangeDoc
DMC
ProNovia SAP DocumentManagementClient
ESB
ProNovia SAP EasyBrowse
GCP
ProNovia SAP PLM ProcessManager Generic CAD Plugin
MMS
ProNovia SAP MaterialMasterSupport
MSC
ProNovia SAP PLM StructureControl
MSO
ProNovia SAP DMS MSOfficeIntegration
OBJ
ProNovia Object Services
OLM
ProNovia SAP ObjectLifecycleManager
PBL
ProNovia SAP PLM PRM DynamicBaseline
PCF
ProNovia SAP Client Framework
PCM
ProNovia SAP PLM ChangeManager
PLC
ProNovia SAP PLM Client
PRM
ProNovia SAP PLM ProcessManager
4
ProNovia AG, P.O. Box, CH-8180 Bülach
UTI
Introduction
Abbreviation
Stands for
PRL
ProNovia SAP PLM ProcessManager LogisticExtension
PBL
ProNovia SAP PLM PRM DynamicBaseline
SDF
ProNovia SAP DMS FrameWork
UGC
ProNovia SAP PLM UG-Conversion (Marenco)
UTI
ProNovia Basic Library
More terms are described in the ProNovia SAP PLM Glossar.
1.4
Symbols in this document
In this document following symbols may be used:
Important or critical hint, to pay special attention to.
Additional information.
ProNovia AG, P.O. Box, CH-8180 Bülach
5
UTI
Installation of ProNovia Basic Library
2
Installation of ProNovia Basic Library
This manual describes the first installation of ProNovia Basic Library on a SAP system.
Further installations of ProNovia Basic Library as well the installation of other ProNovia products can
afterwards be made using ProNovia's central product management and is described in detail in the
ProNovia UTI Customizing manual.
2.1
Introduction
For the installation of ProNovia Basic Library, one or several transport orders will be delivered as ZIP-files.
In this description the syntax R<trspnr>.TPD, or. K<trspnr>.TPD is used for the file name of the SAP
transport. Place holder <trspnr> must be replaced by the correct number of the transport order. The
number of the transport or in the Sap system is TPDK<trspnr>.
For example, files can be named "R900149.TPD" and "K900149.TPD", however the corresponding
order number in the SAP system is TPDK900149.
Instead of TPD another file extension may be used. Depending the ProNovia source system, where the
package was built. For further information please refer to the product download page.
In the examples about the import steps, the training system TPE will be used. Therefore TPE must
always be replaced by the import system ID.
2.2
Preparations
Files, which are required for the import, must be stored in the following directories of the SAP ERP systems:
R<trspnr>.TPD
This file must be moved to the data directory of the transport system.
Example: Unix System /usr/sap/trans/data or Windows F:\usr\sap\trans
\data\
K<trspn>r.TPD
This file must be moved to the cofiles directory of the transport system.
Example: Unix System /usr/sap/trans/cofiles or Windows F:\usr\sap\trans
\cofiles\
The path may be different on your SAP ERP system.
6
ProNovia AG, P.O. Box, CH-8180 Bülach
UTI
Import
3
Import
The following steps are required to import ProNovia Basic Library on your SAP ERP system.
Dialogs and steps may be different from the examples used, depending on the system settings and
release stage.
The transport orders must be imported in the order of their transport number.
3.1
Import Steps
· Start of transaction Transport Management System (STMS) and branch to import overview.
· Selection of queue (example TPE) .
· Attachment of transport order via menu Extras
Additional transports
Number of transport order is generated as described in Introduction
ProNovia AG, P.O. Box, CH-8180 Bülach
Add
6
7
UTI
Import
· Selection of the attached transport order and start of import process with Import order.
· Setup of import options "Ignore Invalid Component Version" in the next dialog.
· Confirmation of the dialog and other information.
8
ProNovia AG, P.O. Box, CH-8180 Bülach
UTI
De-installation
4
De-installation
The de-installation of ProNovia products is described in following ProNovia Knowledge Base article::
· http://support.pronovia.ch/index.php?/Knowledgebase/Article/View/2814
ProNovia AG, P.O. Box, CH-8180 Bülach
9