Microtherm® Overstitched Panel - Inn

Microtherm® Overstitched Panel
Versatile panels of flexible microporous insulation
Microtherm® Overstitched Panel
is a lightweight flexible panel of high
performance thermal insulation stitched
through on a parallel grid pattern and
designed to form easily around complex
shapes for optimised protection.
Microtherm® Overstitched Panel
is also available in a “semi-overstitched”
version which is a slightly less flexible
form that is stitched through in one
direction only. This makes it more
suitable for wrapping around cylindrical
shapes.
Properties
•Formulation based on opacified silica.
•Capable of continuous exposure to 1000 °C
(1832 °F).
•Up to 4 times more thermally efficient
at high temperatures than conventional
insulation.
•Microtherm® Overstitched Panel
is certified Class A1 to European Single
Burning Item (SBI) test, EN 13823
• Non-combustible.
• No respirable fibres.
• Environmentally safe.
Applications
• Insulation of complex shapes and
cylinders that would be impossible
to insulate with conventional
panel or block materials.
Microtherm is a world leader for thermal insulation solutions • info@microthermgroup.com • www.microthermgroup.com
Microtherm® Overstitched Panel
T Y PI C A L P R ODUCT CH AR ACT E R I S T I CS
Thermal Conductivity
Size Availability
0. 6
Thickness as specified by the customer. Normally from 4 - 10 mm (3/16” to 3/8”) in 0.5 mm steps.
If greater thicknesses are needed the use of two or more layers is advised.
Stock panel size is 1200 mm x 600 mm (47 1/4” x 23 5/8”).
Other panel sizes may be requested by the customer.
0 .4
Performance
MEA N T E M P E R ATU R E (° F)
400
600
800
0. 10
0. 099
MICROTHERM SUPER G OVERSTITCHED PANEL
240 k g/m 3 d en s i t y
0. 088
0. 066
THER M AL CO N DU CTIVITY (W/m . K)
0. 055
0. 044
0. 033
0.2
0. 022
0.0 1
0
0
100
200
300
400
T HER M AL CO N DU CTIVITY (Btu . i n/ft 2 . hr . ° F)
0. 077
500
ME AN TE MPE RATURE (°C)
Specific Heat
Maximum temperature limits Microtherm® Super G - 1000 °C (1832 °F) for long term exposure.
Thermal conductivity (TC) - Microtherm® Super G @ 240 kg/m3.
0.0258 W/m.K at 100 °C mean
0.0283 W/m.K at 200 °C mean
0.0313 W/m.K at 300 °C mean
0.0347 W/m.K at 400 °C mean
Note: TC will vary as a function of density and sewn cell pitch size. Data shown are for a cell pitch of 50 mm (2”).
Specific heat capacity
680 J/kg.K at 0 °C
920 J/kg.K at 200 °C
1000 J/kg.K at 400 °C
T EM P E R ATU R E (° F)
200
400
600
800
Manufacturing Tolerances
1400
MICROTHERM SUPER G OVERSTITCHED PANEL
0.30
1200
0 .25
0.
25
0 . 20
S PEC I F I C H EA T C AP A C ITY ( J/kg .K)
800
600
0 .15
400
0.10
200
0 .05
0
0
100
T E M P E R AT U R E (°C)
200
300
400
500
S PE C I F I C H E AT C AP AC ITY ( B t u/l b °F)
1000
Tolerance on panel thickness for densities ≥ 200 kg/m3.
± 0.5 mm (0.02”) for panel thickness ≤ 10 mm (≤ 3/8”)
± 0.8 mm (0.03”) for panel thickness > 10mm (> 3/8”)
Tolerance on panel thickness for densities < 200 kg/m3.
± 0.75 mm (0.03”) for panel thickness < 6.25 mm (< 1/4”)
± 1.0 mm (0.04”) for panel thickness 6.25 mm - 10 mm (1/4”- 3/8”)
± 1.25 mm (0.05”) for panel thickness > 10 mm (> 3/8”)
Density
Density of the panel core 200 - 300 kg/m3 dependent on area and thickness.
Standard finish styles available
Woven E glass covering. Stitched on 50 mm (2”) square lattice.
Other stitching grids available when appropriate.
Typical Values
Performance values quoted here are for general guidance. For more precise information
and assistance with design please contact our materials specialists
The information contained in this datasheet/brochure is intended to assist in designing with Microtherm products. It is not intended to and does not create any warranties,
express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on this datasheet will be achieved by a user for a
particular purpose. The user is responsible for determining the suitability of Microtherm products for each application.
Issue ref.220109/ 01
Microtherm NV • België, Industriepark Noord 1, BE-9100 Sint-Niklaas, T +32 (0)3 760 19 80, F +32 (0)3 760 19 99, info@microthermgroup.com
Microtherm Inc • U.S.A., 3269 Regal Drive, Alcoa, Tennessee 37701, T +1 865 681 0155, F +1 865 681 0016, sales@microtherm.us
Nippon Microtherm Co. Ltd. • Japan, Korakuen Shinjuku Bldg, 4-15-7, Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023, T +81 3 3377 2821, F +81 3 3378 2821, sales@microtherm.co.jp
Microtherm is a registered trademark of Microtherm (GB) Ltd.
47665
www.microthermgroup.com