armor shield brochure.indd
Transcription
armor shield brochure.indd
Cable Manufacturing Business E x t r e m e N e t A r m o r e d S h i e l d P r o t e c t i v e D i s t r i b u t i o n S y s t e m I n f r a s t r u c t u r e S o l u t i o n T M Customizing Intrusion hardened carriers are installed below ceilings or Detection of Optical above flooring so they can be visually inspected Communication Systems to ensure that no intrusions have occurred. These (IDOCS) Secure Networks periodic visual inspections (PVIs) occur at a provides superior technology over frequency dependent upon the level of threat to the copper where data protection is environment, the security classification of the data, imperative and data speed necessary. and the access control to the area. ExtremeNet Armored With the Government’s demand for security and the deployment of SIPRNET, JWICS and other Shield provides an alternative solution Alarmed Carrier PDS secure networks Cable Manufacturing Business has for Hardened Distribution Protective As an alternative to conducting human visual developed its ExtremeNet Armored ShieldTM Distribution System (PDS). The purpose inspections, an Alarmed Carrier PDS may be Secure Physical Network Security Infrastructure of a PDS is to deter, detect and/or make difficult constructed to automate the inspection process Solution. ExtremeNet Armored ShieldTM physical access to the communication lines carrying through electronic monitoring with an alarm system. Infrastructure Solution which provides an innovative national security information. Approval authority, In an Alarmed Carrier PDS, the carrier system is product design that is customized to each client’s standards, and guidance for the design, installation, “alarmed” with specialized optical fibers deployed application. ExtremeNet Armored ShieldTM is and maintenance for PDS are provided by NSTISSI within the conduit for the purpose of sensing an end to end secure solution for Secure Passive 7003 to U.S. government departments and agencies acoustic vibrations that usually occur when an Optical Network (SPON), Gigabit Passive and their contractors and vendors. Hardened intrusion is being attempted on the conduit in order Optical Network (GPON), and Fiber to Distribution PDSs provide significant physical to gain access to the cables. the Desk (FTTD) in Intrusion Detection of protection and can be implemented in three forms: Optical Communication Systems (IDOCS) Hardened Carrier PDSs, Alarmed Carrier PDSs and Alarmed Carrier PDS offers several advantages over applications. Its innovated product design improves Continuously Viewed Carrier PDSs. Hardened Carrier PDS: TM the deployment, management and protection of defense critical networks and C4ISR Facilities where Hardened Carrier PDS open storage areas become a challenge. In a Hardened Carrier PDS, the data cables are installed in a carrier constructed of electrical ■ Provides continuous monitoring 24/7/365 ■ Eliminates the requirement for periodic visual inspections. ■ Allows the carrier to be hidden above the Cable Manufacturing Business ExtremeNet metallic tubing (EMT), ferrous conduit or pipe, or ceiling or below the floor, since PVIs are not Armored ShieldTM is the only end to end ridged sheet steel ducting. All of the connections in required. solution where all the products are designed a Hardened Carrier System are permanently sealed and developed by a single manufacture. Other completely around all surfaces with welds, epoxy or secure networks provide products from several other such sealants. If the hardened carrier is buried different manufactures using “off the shelf” type under ground, to secure cables running between solutions, often mismatched components that cause buildings for example, the carrier containing the degradation of network performance and warrantee cables is encased in concrete. issues. That is how we are able to offer a lifetime warranty! ■ of connections. ■ accomplished via human inspections that are required to be performed periodically. Therefore, Eliminates the requirement for concrete encasement outdoors. ■ Eliminates the need to lock down manhole covers. ■ With a Hardened Carrier System, detection is Eliminates the need for the welding and epoxy Enables rapid redeployment for evolving network arrangements Legacy Alarmed Carrier Systems monitor the Simple Distribution PDS Intrusion Detection of Optical carrier containing the cables being protected. More Simple Distribution PDSs are afforded a reduced Communication Systems (IDOCS) is ideal advanced systems monitor the fibers within, or level of physical security protection as compared for use in areas of a PDS that cannot be visually intrinsic to, the cables being protected to turn those to a Hardened Distribution PDS. They use a Simple monitored but still require protection at all times. cables into sensors, which detect intrusion attempts. Carrier System (SCS) and the following means are Requiring minimal cost to install and operate acceptable under NSTISSI 7003: when considering the rising costs of installing and Depending on the government organization, utilizing ■ The data cables should be installed in a carrier maintaining a data encryption system. The benefit an Alarmed Carrier PDS in conjunction with ■ The carrier can be constructed of any material of the IDOCS system over other alarmed carrier (e.g., wood, PVT, EMT, ferrous conduit) technology is that it monitors the same fiber The joints and access points should be secured or cable that required protection. As well as its In these instances, the cables being protected can be and be controlled by personnel cleared to the COMSEC-specific development negated the false installed in existing conveyance (wire basket, ladder highest level of data handled by the PDS alarm issue that would result from the technology The carrier is to be inspected in accordance transfer of traditional fence line systems. interlocking armored cable may, in some cases, allow for the elimination of the carrier systems altogether. rack) or suspended cabling (on D-rings, J-Hooks, etc.). ■ ■ with the requirements of NSTISSI 7003 Continuously Viewed Carrier PDS The Secure Passive Optical A Continuously Viewed Carrier PDS is one that is Network (SPON) solution under continuous observation, 24 hours per day is based on the ITU-compliant (including when operational). Such circuits may be Gigabit Passive Optical grouped together, but should be separated from all Network (GPON) technology. non-continuously viewed circuits ensuring an open This solution provides connectivity field of view. Standing orders should include the for voice, data, video, and secure requirement to investigate any attempt to disturb and non-secure local area networks. the PDS. Appropriate security personnel should SPON seamlessly integrates analog investigate the area of attempted penetration within and digital video, broadband data, 15 minutes of discovery. This type of hardened and telephone services onto a common platform. It provides a Layer 2 passive carrier is not used for Top Secret or special category information for non-U.S. UAA. These Protective Distribution System optical distribution system to end users. An Optical (PDS) solutions can provide Secure Physical Line Terminal (OLT) at the data center provides the Network Security Infrastructure Solution for interconnection to the SPON system. Single mode Secure Passive Optical Network (SPON), fiber is then used to carry the optical signal to an Gigabit Passive Optical Network (GPON), Optical Network Terminal (ONT) at the user station and Fiber to the Desk (FTTD) in Intrusion that provides an intelligent managed demarcation Detection of Optical Communication point for network services. Systems (IDOCS) applications, ExtremeNet Armored ShieldTM provides an innovated product design that is customized to each client. Gigabit Passive Optical Networks Fiber-to-the- (GPON) provides a capacity boosts in both the Desk (FTTD) total bandwidth and bandwidth efficiency through Increasing the use of larger, variable-length packets in PON bandwidth technology. GPON is standardized in ITU-T G.984 and security (GPON) that permits several choices of bit rate, demands in Local but the industry has converged on 2.488 Gbps of Area Networks downstream bandwidth, and 1.244 Gbps of upstream (LANs) lead bandwidth [1]. GPON Encapsulation Method to a shift form (GEM) allows very efficient packaging of user traffic, copper to fiber with frame segmentation to allow for higher QoS optic solutions. for delay-sensitive traffic such as voice and video In future installations not only the campus and communications. building backbone of a LAN is implemented in fiber-optic but also Fiber-to-the-Desk (FTTD) will be a frequently requested solution. The term Fiber-to-the-desk (FTTD) is used to describe the horizontal cabling in the areas of data transmissions and telecommunication, which leads from the floor distributor to the outlets at the workplace. In the standards ISO/IEC 11801 and EN 50173 it is the tertiary level. C A B L E MANUFACTURING B U S I N E S S Computer Cabling & Networking Products ■ 16462 Gothard Street, Suite A, Huntington Beach, CA 92647 ■ toll free: 877.853.6439 ■ tel: 714.848.5796 ■ fax: 714.848.2296