ARC 2016 Program Plenary Session

ARC 2016 Program
Plenary Session
Hall B 2.14
08:30
Gordon Rohrmair (HS Augsburg)
08:40
08:55
Reinhard Stolle (HS Augsburg)
Marcus Reichenberger (TH
Nürnberg)
Jürgen Mottok (OTH Regensburg)
09:00
Keynote
Frank Burnautzki
(MAN DT, Vorstand Beschaffung)
08:45
Opening address from the designated president
of the University of Applied Sciences Augsburg
On the M-APR in Augsburg
M-APR - Forschungsmasterstudium an
bayerischen Hochschulen
Forschendes Lernen - Die sieben Schritte
Einblick MAN Diesel & Turbo und
Auswirkungen des Ölpreisverfalls auf den
Maschinen- und Anlagenbau
Morning Sessions
Rooms →
09:50
10:10
10:30
10:50
11:10
11:30
11:50
12:10
12:30
A 2.10
A 2.15
A 3.13
A 3.19
E 1.02
E 3.06
H 1.22
H 1.28
Rob
Mst 1
Log
Man 1
Pow 1
Car 1
Pow 2
Swr 1
Log
Man 1
Pow 1
Car 1
Pow 2
Swr 1
Coffee break
Rob
Mst 1
Lunch break
Poster Sessions
Rooms →
14:00
14:30
Foyer B 2.14
First semester 1
First semester 2
Foyer of building E
Advanced semesters
—
Afternoon Sessions
Rooms →
15:00
15:20
15:40
16:00
16:20
16:40
17:00
17:20
17:40
ARC 2016
A 2.10
A 2.15
A 3.13
A 3.19
E 1.02
E 3.06
H 1.22
H 1.28
Com
Mst 2
Man 2
Man 3
Pow 3
Car 2
Swr 2
Swr 3
Man 2
Man 3
Pow 3
Car 2
Swr 2
Swr 3
Coffee break
Com
Mst 2
End of the conference
University of Applied Sciences Augsburg
24 June 2016
Morning Sessions
ARC 2016
University of Applied Sciences Augsburg
24 June 2016
Rob - Robotics
Raum: A 2.10
Chair: Prof. Dr. Florian Kerber
09:50
10:10
10:30
10:50
11:10
11:30
11:50
12:10
12:30
Jonas Lang
Thomas Schlegl
Tobias Fink
Stefan May
Michael Feustle
Eberhard Roos
Peter Heiligensetzer
Coffee break
Julian Paul Staehler
Carsten Markgraf
Tobias Vogel
Florian Kerber
Florian Kasper
Johann Schweiger
—
Lunch break
Comparison and Evaluation of Camera-Projector Calibration
Methods Using a Robot and Structured-Light 3D
Reconstruction
Participation in Audi Autonomous Driving Cup 2016
Sensor- and safety concepts of a tool safety device for the
human-robot-collaboration
Feed-forward strategy for distance controlled industrial robot
applications using sum of sine networks
Integrated Product and Process Modeling for smart factory
applications
A Review of Concepts on Cooperative Manipulation with
Robot Arms
—
Mst 1 - Measurement Technologies 1/2
Room: A 2.15
Chair: Prof. Dr. Matthias Kamuf
Dominik Stadler
Matthias J. Hofmann
09:50
Hubert Motschmann
Mikhail Chamonine
Florian Erzinger
10:10
Lars Krenkel
10:30
Stefan Hernitscheck
Hans-Peter Rabl
10:50
Coffee break
11:10
Maximilian Aurbach
11:30
11:50
12:10
12:30
ARC 2016
Barbora Blahnikova
Alfred Lechner
Leonid Koval
Thomas Suchandt
Stehpan Ritzer
Tobias Roth
Sebastian Walter
Lunch break
Automated System for Measuring the Surface Properties of
Liquid-Air Interfaces
Investigation of Blood Flow Regimes in Membrane
Oxygenators of Artificial Lungs
Development of a Gas Sampling Valve for determining the
composition of the Chamber Gas in a Combustion Engine, Part
1 - State of the Art and concepts
Implementation and Validation of IMU Measured Human
Kinematics into a Multibody Simulation Program
Multilyzer – Microfluidic Online Measuring System for the
Analysis of Environmentally Relevant Substances
A Mechanical Testbench for a Backlash Free Drive System
Concept comparision regarding the torsional dynamic behavior
of a semiautomatic test bench for brushless electric motors
University of Applied Sciences Augsburg
24 June 2016
Log - Logistics & Organisation
Room: A 3.13
Chair: Prof. Dr. Peter Richard
Evidence of the relevance of the master
production scheduling (MPS) for
hierarchical production planning
Development of an innovative charging
infrastructure concept and a smart
charging technology for charging of
electric cars in rural areas
Comparison of two well-known
approaches to the Master Production
Scheduling
09:50
Thorsten Vitzthum
Frank Herrmann
10:10
Andreas Maier
Andreas Grzemba
10:30
Felix Meier
Frank Herrmann
10:50
Coffee break
11:10
Andreas Schmidt
Frank Herrmann
11:30
Benjamin Fleischmann
Frank Herrmann
11:50
Stefan Rockinger
Michael Krupp
12:10
12:30
—
Consideration of the capacitated lead time
scheduling with different priority rules
and its influence on original MRP-based
results
Development of heuristic algorithms
regarding lead time scheduling
Research on the interference of Startupbusiness-models in traditional value
chains
—
Lunch break
Man 1 - Materials & Manufacturing Technologies 1/3
Room: A 3.19
Chair: Prof. Dr. André Baeten
Jewgeni Roudenko
09:50
Uta Helbig
Andreas Preischl
10:10
Ulrich Briem
Stefan Dotzler
10:50
Coffee break
David Fichtner
Simon Reichstein
Stephan Kraft
Maximilian Faber
Andreas Kastenmeier
Ingo Ehrlich
Vincent Keim
Josef Spachtholz
Joachim Hammer
Thomas Simson
Lunch break
11:30
11:50
12:10
12:30
ARC 2016
Torsional Fatigue of Wire Ropes
Low temperature creep of AISI 301 and AISI 304 austenitic
steels
10:30
11:10
Synthesis and Characterization of Carbon-doped Titanium
Oxide Nanotubes from Oxidized TiC
Development of low alloyed copper alloys for signal
conduction
Three-dimensional finite element analysis of a composite
tube with multi-row bolted joints
Cyclic deformation behavior of short glass fiber reinforced
Polyamides: Modelling of the visco-elasto-plastic
deformation
LaserCUSING of duplex stainless steel - residual stress
University of Applied Sciences Augsburg
24 June 2016
Pow 1 - Power Technologies 1/3
Room: E 1.02
Chair: Prof. Dr. Michael Finkel
Fabian Junker
09:50
Wilfried Zörner
10:10
Johannes Eller
10:30
Sebastian Salich
Johannes Pforr
10:50
11:10
11:30
11:50
12:10
12:30
Solar Energy Systems for Off-Grid Rural Electrification in
Sub-Saharan Africa
Modelling and analysing the active and reactive power
behaviour of medium voltage grids
Investigations of Semiconductor Devices in Zero-Current
Switched Class-E Converters for automotive wireless charging
applications
Coffee break
Tobias Högel
Ralf Goller
Michael Gerstner
Armin Dietz
Abstract project half shaft
Direct use of renewable energy in drive systems to relieve the
power consumption from grid
Development of an algorithm to calcualte optimal schedule's
for cogeneration plants
Ulrike Mayer
Michael Fischer
Christoph Steinhart
Ben Ludwig
Michael Finkel
Lunch break
Analysis of the Electrical Drive Start-up Behavior in an
Islanded Grid using a Transient Simulation-Model
Car 1 - Car Technologies 1/2
Room: E 3.06
Chair: Prof. Dr. Carsten Markgraf
Jonas Frank
Verification and validation of a functional safety concept for a
09:50
Georg Scharfenberg wheel-hub driven vehicle
Development of an engine control unit’s software function to
10:10
Sebastian Kestl
control a two-stage turbocharging system
Low-Temperature DeNOx -identification and assessment of
Jürgen Gebhard
10:30
suitable technologies for future exhaust gas aftertreatment
Hans-Peter Rabl
systems
10:50
Coffee break
Stefan Brunner
11:10
Thomas Waas
Automotive Ethernet: One Step Towards Autonomous Driving
Markus Kucera
Peter Schwanzer
Development of a test cycle to represent the Real Driving
11:30
Oliver Mück
Emissions (RDE) of a diesel engine at a test bench
Hans-Peter Rabl
Introducing the topic of connected electromobility. Information
11:50
Julia Nowatschek
on the interfaces, communication protocols and links of electric
vehicle
Daniel Polz
System integration of a formula student vehicle at a motor test
12:10
Carsten Markgraf
bench
12:30
Lunch break
ARC 2016
University of Applied Sciences Augsburg
24 June 2016
Pow 2 - Power Technologies 2/3
Room: H 1.22
Chair: Prof. Dr. Reinhard Stolle
09:50
Matthias Hiermeier
Johannes Pforr
10:10
Michael Heberl
Michael Sterner
10:30
Sebastian Kick
Oliver Brückl
10:50
11:10
11:30
11:50
12:10
12:30
Coffee break
Julia Abb
Belal Dawoud
Raphael Wagensonner
Robert Mnich
Stability Analysis and Control Algorithm development for a
Floating Capacitor H-Bridge Converter in Automotive
Energy Nets
Electrochemical reduction of CO2 to CO on silver nanowire
catalysts
Developing a characteristic curve for the voltage adaption
of a substation transformer depending on the active and
reactive power flow over the substation transformer
Lithium bromide heat transformer with different heat
supplies to generator and evaporator
Desalination
Requirements for Microgrids and a possible market design
for aiding the grid restoration process after a blackout
Tobias Sator
Sebastian Schüßlbauer
Günter Kießling
Lunch break
Simulation of a Smart Grid Application using Simulink
Swr 1 - Software Engineering 1/3
Room: H 1.28
Chair: Prof. Dr. Thorsten Schöler
Niklas Hehenkamp
09:50
Christian Facchi
Oleksandra
10:10
Shpatakovska
Julia Handl
10:30
Joerg Arndt
10:50
Coffee break
Sandra Boemmel
11:10
Claudia Meitinger
Andreas Gareis
11:30
Karl-Ludwig Schinner
Gundolf Kiefer
Klaus Graßkamp
11:50
Armin Sehr
Dominik Laton
12:10
Claudia Meitinger
12:30
Lunch break
ARC 2016
Speeding up Embedded Multi-core Systems Using Locality
Conscious Parallelization Techniques
Usage of neural networks in multi-agent systems
A new class of fractal plane-filling curves
FPGA-based Contrast and Brightness Adjustment of a
Thermal Image
An FPGA-based hardware framework for depth extraction
using high-resolution line scanners
Accurate temporal alignment for distant-talking speech
recognition
Optimising the partitioning of video processing systems
University of Applied Sciences Augsburg
24 June 2016
Afternoon Sessions
ARC 2016
University of Applied Sciences Augsburg
24 June 2016
Com - Optical Technologies & Communication Networks
Room: A 2.10
Chair: Prof. Dr. Reinhard Stolle, Prof. Dr. Olaf Ziemann
Timo Schuster
Power over POF - Using LED´s for Half Duplex Power and Data
15:00
Olaf Ziemann
Transmission
15:20
Max Hasenberger
GlaGOB
Christian Panhans
15:40
Models of Twisted Pair Cables at Microwave Frequencies
Reinhard Stolle
16:00
Coffee break
Markus Giedt
Visualizations of joining techniques via a human interface device
16:20
Robert Bösnecker
in a closed system
The Future of Real-Time Capable Industrial Networks: Time16:40
Christian Billig
Sensitive Networking
17:00
—
—
17:20
—
—
17:40
End of the conference
Mst 2 - Measurement Technologies 2/2
Room: A 2.15
Chair: Prof. Dr. Matthias Kamuf
Dominik Müller
15:00
Gordon Elger
15:20
Bilal Vana
Hans-Peter Rabl
15:40
Michael Dostalek
16:00
Coffee break
Dominik Möllenbeck
Günther Benstetter
Dominik Armbruster
Stefan Hierl
Johannes Stierstorfer
Oliver Steffens
Felix Wellnitz
—
End of the conference
16:20
16:40
17:00
17:20
17:40
ARC 2016
Transient thermal testing for quality control of LEDs
Development of a Gas Sample Valve for determining the
composition of the Chamber Gas in a Combustion Engine
Part 2 – Concepts and first construction
Investigations on temperature measurement during quasisimultaneous laser transmission welding using a 3D-Scanner
with integrated pyrometer
Stress Mechanism of Time-Dependent Dielectric Breakdown
model in SiC MOS-Structures
Simulation of a pyrometer-based temperature measurement
system for quasi-simultaneous laser transmission welding
CONSISTED SAFEGUARDING AND OPERATIONAL
OPTIMIZATION OF HISTORICAL BUILDINGS
—
University of Applied Sciences Augsburg
24 June 2016
Man 2 - Materials & Manufacturing Technologies 2/3
Room: A 3.13
Chair: Prof. Dr. Peter Richard
Tim Grotz
15:00
Wolfgang Krcmar
Sebastian Schmidt
15:20
15:40
16:00
16:20
16:40
17:00
17:20
17:40
Robert Schneider
Screening for additives to reduce thermal conductivity in plasters
maintaining the compressive strength class
Hexapod as primary kinematic system for applications in the
optic industrie
Christopher Benka
Evaluation of the drill hole quality of oxide ceramic matrix
Ralf Goller
composites (OCMCs) drilled with different processing methods
Achim Rösiger
Coffee break
Simon Nübler
Vinzent Schmid
FEM-simulation of a tube to flange joint under bending load
Ingo Ehrlich
Patrick Mueller
Nicolai Hesse
Foamed Geopolymeric Insulation Systems
Wolfgang Krcmar
—
—
—
—
End of the conference
Man 3 - Materials & Manufacturing Technologies 3/3
Room: A 3.19
Chair: Prof. Dr. André Baeten
Andreas Diermeier
15:00
Dirk Sindersberger
Gareth J. Monkman
Sebastian Wittmann
15:20
Alfred Lechner
15:40
16:00
16:20
16:40
17:00
17:20
17:40
ARC 2016
Sven Steinmann
Ingo Ehrlich
Coffee break
Alexandra Wätzig
Vinzent Schmid
Ingo Ehrlich
Frauke Hartmann
Josef Spachtholz
Joachim Hammer
Daniel Sperr
Marcus Reichenberger
Kristina Grunewald
—
End of the conference
Magneto-active polymer actuator
Analyzing the substrate-induced stress in graphenemonolayers via Raman Spectroscopy
Investigation of transversal impact stress in fiber reinforced
plastics under low- and high-velocity impact and
determination of the experimental procedure
Damage modeling of adhesive joints using the cohesive
zone model
Characterization of the crack growth in the coated nickelbased superalloy PWA1484 during thermo-mechanical
fatigue - Deformation behavior and Simulation
Printed thermoelectric structures of PEDOT:PSS
—
University of Applied Sciences Augsburg
24 June 2016
Pow 3 - Power Technologies 3/3
Room: E 1.02
Chair: Prof. Dr. Wolfgang Zeller
Markus Lang
15:00
Johannes Pforr
Steffen Keilbach
15:20
Günter Kießling
15:40
Reinhard Kreuzer
16:00
Coffee break
16:20
Christopher Mühlbauer
16:40
Martin Regnet
17:00
17:20
17:40
Michael Nitzschner
Valerio Conte
Alexander Frey
—
End of the conference
Switching Performance of SiC MOSFET Dependent on the
Source and Drain Inductance
Testing and adjusting a MPP tracking DC/DC converter for
a PV application
Decentralized reactive power regulation of renewable
energy systems in a real medium voltage grid
Evaluation of the potential of operational compensation
systems for reactive power control in medium voltage
systems
Investigation of shaft steel magnetization and stator core
magnetization and their influences on the magnetic behavior
of two pole induction machines
One-way-coupled thermal simulation of a pouch type
lithium ion battery
—
Car 2 - Car Technologies 2/2
Room: E 3.06
Chair: Prof. Dr. Carsten Markgraf
15:00
15:20
15:40
16:00
16:20
16:40
17:00
17:20
17:40
ARC 2016
Stabilization of the energy net voltage using distributed
capacitors
Marcel Dietz
Sinan Hasirlioglu
Thomas Brandmeier
Rafael Basilio Chaves
Georg Rill
Hans Ingo Weber
Coffee break
Matthias Niegl
Alessandro Contini
Peter E. Pfeffer
Florian Schweiger
Andreas Grzemba
Christian Werner
Walter Stütz
Johannes Morgenschweis
Oliver Mück
Hans-Peter Rabl
Peter Schwanzer
End of the conference
A Survey on Automotive Surround Sensors
Fuzzy Braking and Steering Control Approach for a
Collision Avoidance System
Model-Based Steering ECU Application Using Offline
Simulation (Software in the Loop)
Problems with the sharing of multiple power supplies for
simultaneous charging of several electrical vehicles
CAGE 2.0
Investigation of the applicability of a three-way valve for
low-pressure exhaust gas recirculation in passenger car
diesel engines
University of Applied Sciences Augsburg
24 June 2016
Swr 2 - Software Engineering 2/3
Room: H 1.22
Chair: Prof. Dr. Florian Kerber
Tobias Schuierer
Development of a software tool for simulation of complex
15:00
Frank Herrmann
production facilities – Implementation of the simulation logic
Michael Kapfer
Conception and Implementation of a IT-Security Lab for
15:20
Gordon T. Rohrmair Education, Training and Evaluation Purposes
Markus Eider
Development of Hard- and Software for Hardware in the Loop
15:40
Wolfgang Dorner
Test Automation
16:00
Coffee break
Raphael Kawasch
16:20
NoFaRe - demonstration- and test environment.
Rudolf Hackenberg
Christoph Baer
16:40
The Privacy-by-Design Process
Rudolf Hackenberg
Sandra Albertsen
Turkish migrants in the new consumer public - A pilot project
17:00
Mirjam Jaquemoth
for the product range in the financial sector
17:20
—
—
17:40
End of the conference
Swr 3 - Software Engineering 3/3
Room: H 1.28
Chair: Prof. Dr. Thorsten Schöler
Sarah Symelka
15:00
Statistical Analysis of Log Data
Christoph Skornia
Christian Neuberger
15:20
R_RTOS - Scalable Distributed Real Time Operating System
Peter Urbanek
Tilo Fischer
Evaluation of Index Calculus Algorithm using a Beowulf
15:40
Andreas Aßmuth
Cluster
16:00
Coffee break
Michael Heigl
Safety and Security Enhancements for the Embedded Plug-In
16:20
Andreas Fuchs
Device Communication
Andreas Grzemba
Alexander Nitsche
Software system to examine the influence of GUI on the
16:40
Hans-Georg
learning experience and to compare simulated with hands-on
Schweiger
labs in engineering education
Markus Reiß
Development and evaluation of new activating exercises for the
17:00
Jürgen Mottok
software engineering education in case of Design Pattern
17:20
—
—
17:40
End of the conference
ARC 2016
University of Applied Sciences Augsburg
24 June 2016
Poster Sessions
ARC 2016
University of Applied Sciences Augsburg
24 June 2016
First semester 1/2
Room: Foyer B 2.14
Chair: Prof. Dr. Wolfgang Meyer
Tim Oliver Mehling
Andre Baeten
Florian Zacherl
Hans-Peter Rabl
Simon Mast
14:00
Dirk Schneider
Eberhard Franz
Christof Ochs
Johanna Gleichauf
Stefan May
Dominik Will
Johannes Reschke
Armin Sehr
Michael Schneider
Anton Haumer
Matthias Schreiner
Rudolf Hackenberg
Raphael Ong
Johann Schweiger
Thomas Kristlbauer
Gerald Kupris
Nils Weiß
Rudolf Hackenberg
Martin Markus
Theo Schmidtner
Carsten Markgraf
Matthias Wagner
Martin Doll
Eugen Gribel
Michael Elsner
Roman Sammer
Werner Bogner
Dominik Jungtäubl
Sebastian Dendorfer
Alexander Zott
Florian Kerber
Sebastian Malz
Florian Fischer
Fabian König
Johann Weiß
Werner Bogner
Daniel Gebhardt
ARC 2016
MAPR: HyCOMET GS - applied rocket science
Investigation of threshold operating parameters for CommonRail-Diesel engines fueled with straight vegetable oil, used as
control energy for hybrid networks
Lean Management and Process Optimization at the wholesale
in Germany
Cost reduction in heat supply - Development of a method to
optimize shell boiler plants
Proportional resonant (PR) control of current harmonics
Concept for modelling sensor characteristics and their fusion
algorithms to ensure robust localisation for rescue robots
Ultrashort pulse laser structuring of plastics mold steels
Assembly and Examination of a Multichannel Audio
Recording System for an Acoustic Camera
Modelling and Simulation of of a 5-Axis milling machine with
MODELICA for improving the trajectory management
Innovative Security Mechanisms in Smart Grids
Challenges of Implementing Vehicle-Manipulator Systems
Evaluation of Real-time Systems on Microcontrollers
CarSec: Security research on connected cars
Deveploment of a synchrounos motor with permanent magnets
for a formula student race vehicle with an optimized power
density
Exhaust gas analysis of an emission optimized direct-injected
2-stroke single cylinder research unit
Commissioning and optimization of a Stirling engine
RF structures on organic circuit boards in the millimeter wave
frequency range
Topographical illustration of muscle activity
Simulation and offline programming of a production system
based on principles of ‘Industry 4.0’
Concrete moisture model for transient boundary conditions
Cold Boot Attacks on Embedded Devices
Analysis of protocol-based attacks on industrial networks using
the example of the S7-Protocol.
Research and further development of new methods in industrial
metal detection
Hydraulic activation of concrete with high slag sand content
with anhydrite
University of Applied Sciences Augsburg
24 June 2016
Andreas Eberhardt
Simon Schramm
Armin Becher
Thomas Grauschopf
Mischa Mühling
Sebastian Dendorfer
Michael Hoerner
Armin Dietz
Cornelia Ozga
Daniel Möllenbeck
Raimund Förg
Thilo Hoffmann
Thomas Lex
Sebastian Hederer
Marcus Wagner
Eduard Dechant
Bettina Vogl
14:00
Maximilian Dittmer
Alfred Lechner
Andreas Popp
Lukas Rabenstein
Andreas Kremser
Tobias Schindler
Armin Dietz
Christoph Hartmann
Ulrich Margull
Albert Biber
Thomas Lex
Jihad Taha
Vahid Salehi
Jürgen Gebhard
Hans-Peter Rabl
Christopher Sittl
Hans-Peter Rabl
Peter Himmelstoß
Andreas Vogl
Nikolaus Mueller
Sebastian Hell
Benjamin Großmann
Thomas Schlegl
Martin Mayr
Frank Herrmann
ARC 2016
Private Netzkopplung
Latency Compensation for Collaborative Teleimmersion
Systems
Adapting a shoulder complex to a musculoskeletal force
dependent kinematics thorax model
A flexible and intelligent modular small drive concept
Technology and applications of variable-focus lenses
Glass as Substrate material for Applications in LED
Technology
Waste heat recovery of an internal combustion engine by direct
integration of an ORC system
Analysis and implementation of an isotropic elastic material
model
Development of low-frequency vibration energy harvester for
Wireless Sensor Networks
Dimensioning of an inductor to adjust the reactive power
balance in the power grid
Picolyzer for continuously online measurement of metal
contaminations in fluidics
Specification and Design of an Appropriate Honeypot System
Investigation of AC losses in permanent magnets of PM
synchronous machines
Model based FPGA programming
Software patterns and techniques for energy-efficient massive
parallelization in resilient and safe hard-real-time systems
Efficiency Improvement of a Carbon Dioxide Refrigeration
Cycle by means of an Organic Rankine Cycle.
Cloud Computing platforms: performance and Interface
comparison of Microsoft Azure and SAP HANA
Low-Temperature DeNOx - identification and assessment of
suitable technologies for future exhaust gas aftertreatment
systems
Acoustic optimization of combustion engines
Investigation and optimisation of tools for ultrasonic welding
Development of an innovative, autonomous tugger train to
supply industrial production plants
Modelling and parameter identification of pneumatically
actuated artificial muscles
Comparison between a self-controlling workpiece and the
centralized production planning
University of Applied Sciences Augsburg
24 June 2016
First semester 2/2
Room: Foyer B 2.14
Chair: Prof. Dr. Peter Richard
Thomas Rieger
Vahid Salehi
Jegor Kern
Magnus Jaeger
Julian Sarcher
Gundolf Kiefer
Sebastian Kraust
Thomas Waas
Veronika Rembart
Robert Boesnecker
Sebastian Mathes
Ulrich Werner
Christina Obermaier
Lukas Burseg
Vahid Salehi
14:30
Dominik Heigl
Franz Haubner
Johannes Höcherl
Thomas Schlegl
Nico Schmied
Simon Schramm
Bernhard Caspari
Armin Dietz
Klaus Seibold
Tilman Botsch
Andreas Berling
Lea-Alina Skorupa
Michael Krupp
Thomas Wocheslander
Markus von Schwerin
Paul Mäule
Christian Stahl
Johannes Rösler
Barbara Plura
Michael Finkel
Friedrich Muehlenberg
Thomas Schratzenstaller
Markus Geith
Manon Schilke
Johannes Liebl
Christine Wünsche
Matthias Laub
Madita Herpich
Thomas Rist
ARC 2016
SmarFlex Factory – A novel approach of a real time
factory to include auto identification systems in a
Resource Enterprise (ERP) System
Data collection and evaluation of a micro CHP system in a
residential building
Configuration options for an FPGA Implementation of the
Generalized Hough Transform
A practically oriented concept for behavior prediction in
urban environments for autonomously driving vehicles
Sensory determination of the insetting birth process by
breeding sows
Active vibration damping of electrical machines on elastic
steel framework constructions
Design of a Multi-Hop Testbed for Inter Vehicular
Communication Hardware
A Model-Based Systems Engineering Approach for
System-Driven Product Development in an Industrial
Context
Human machine interface for multi robot systems
Smart Workbench: Optimization and Implementation of
Local Path Planning Algorithms to adapt a Collaborative
Lightweight Robot to his Current Environment
High-efficient bidirectional DC-DC converter for coupling
of traction HV-batteries in stationary applications
Multifunctional control system for high speed small drives
Experimental study of heat transfer in transition region
Emulation of Low Voltage Collectives
Optimization of the processes regarding technical
dokumentation in engeneering within lean management
criterias
Development of a lightweight optimized motorcycle frame
for the Moto2 class
Determination of the oil consumption at gasoline engines
Ohm Runner
Analysis and evaluation of the measured data of the Smart
Operator project
Commissioning of a test stand for inducing artificial injury
on cardiovascular blood vessels
Surface Reconstruction by using Zernike Polynomials
Manufacturing of Coronary Stents - Lasercutting
The use of gamification in e-Health applications to
increase the user’s motivation
University of Applied Sciences Augsburg
24 June 2016
Development of a capacitive micromechanical membrane as
detector module for a photoacoustic measurement system as
well as optimization and extension of an
existingphotoacoustic measurement setup
Sustainability and Energy Efficiency in Fast Public Housing
– Urban Concepts and Modular Homes in Times of
Migration and Demographical Change
Andreas Zagler
Thomas Rück
Rudolf Bierl
Lea Raith
Andreas Rozankovic
Oliver Bohlen
Matthias Berchtold
Peter Pfeffer
Maximilian Woerner
Robert Urbaneck
Benjamin Krause
14:30
Philipp Gruber
Michael Krupp
Julia Hoppe
Uta Helbig
Lukas Braun
Andreas Miller
Michael Krupp
Michael Tietze
Analyze and Simulation of the suspension friction in terms
of the steering properties of a car.
Modelling of Realistic Attacker Model for Smart Cities
Occurrence of High Frequency Perturbation in Automotive
Power-Supply Networks and the Impact in DC-DC MultiPhase Converters
Improved situational and environmental awareness for
advanced driver assistance systems
How to control logistic service providers effectively?
Fogging on the inside of glass cabinets in the museum
domain
Secure Smart Home
Industry 4.0
Tayyar Bayrakci
Magdalena Gasteiger
Simon Reichstein
Johannes Reinl
Michael Sterner
Stefan Stiegler
Alfred Höß
Franziska Frenzel
Simon Kunz
Jens Pesch
Elena Gómez-Sánchez
Leonhard Bielmeier
Martin Peterlik
Michael Mogk
ARC 2016
Re-use of used electric vehicle batteries
UAV supported car observation system
Experimental studies of swirling pipe flows, decay of swirl
and particle separation with swirl pipes
Development of new procedures to reduce iron rich phases
in aluminum melt
Harvesting Carbon Dioxide from the Atmosphere
Start of operation of a prototypical embedded platform for a
LTE based communication in between a linked vehicle and
a server
Human-Robot Interfaces for Multi-Robot Systems
Cellulosenitrate: a Technological and Cultural Important
Material. Determination of the Long Term Stability of
historical Objects
Smart Cities and Smart Privacy?
Improvement of Signal-to-Noise Ratio in Laser Range
Finding Binoculars by Means of Electronics and Algorithm
Correlating three forensic techniques to speed up forensic
investigations
Alexander Zöllner
Gundolf Kiefer
Michael Schäferling
Automatic Synthesis of a Hardware-Accelerated Image
Processor Using the ASTERICS Framework
Benjamin Weigl
Evaluating Security Requirements of Lightweight
Cryptography for a Resilient Embedded Software Library
University of Applied Sciences Augsburg
24 June 2016
Advanced semesters
Room: Foyer building E
Chair: Prof. Dr. Thorsten Schöler
Kilian Lenz
Thomas Speth Speth
Kristian Wede
Thorsten Schöler
Matthias Utz
Bernd Gamisch
Thomas Schaeffer
Michael Mayer
Fabian Koch
Marcus Wagner
Marius Kaspers
Tim Jüntgen
Marcel Hartmann
Patrick Sekler
14:00
Tim Drouven
Sebastian Sommer
Michael Klärner
Jonas Löchel
Hans-Georg Schweiger
Matthias Henninger
Wolfgang Schlüter
Michael Stempfle
Markus Bregulla
Maximilian Mundi
Lena Ebner
Michael Elsner
Florian Großmann
Stefan Kasper
Johann Schweiger
Julian Rost
Hans-Peter Schmidt
Kevin Bernhard
Gordon T. Rohrmair
Michael Okon
Christian Endisch
Anja Wölfel
Norbert Graß
Lucas Kögel
Thorsten Schöler
ARC 2016
Planning of the Optimal Crash Avoidance Trajectory of a
Autonomous Driving Robot
The Organizational Impact of Public Cloud Services on
ITIL driven IT Service Management
Introduction of a manual to trouble-shoot problems with
service marketing of logistics provider
Creation of a virtual prototype in a multi body simulation
program
Development and Implementing of a folding machine for
coronary balloon catheters and a crimping machine for
coronary stents.
Stress analysis of a deep drawing tool with the finite
elements method.
Basics of joining technology
Influence of different superplasticizers and the chemical and
mineralogical composition of Portland cements on the
workability
Virtual Commissioning - Process simulation in the
manufacturing industry
Hardware in the loop simulation for micro air vehicle
A microcontroller board based solar thermal system
controller
Conception and Development of a Flexible High Voltage
Battery Management System
An improved dynamic process simulation model to increase
the energy efficiency of aluminum shaft furnaces
Reducing non-value energy consumption to lower operation
costs
Computational Investigation of a Granular Bed Filter
Design of a fuzzy-adapted PID-Controller for a electric
Pump
A Review of Object Detection in Images using Histograms
Design and Implementation of automated tests for the
improvement of the code quality
Conception of a security scoring method for Internetcapable, industrial devices that are found by an Internet
search engine
OPC-UA: A Perspective to Future-Proof Industrial
Information Exchange
Modelling a push-pull converter with a nanocrystalline
transformer core material
Cyber-Physical Systems for Smart Buildings
University of Applied Sciences Augsburg
24 June 2016
Site plan
The sessions are executed in buildings A, B, E and H.
The first digit of a room number refers to the level,
e. g. H 1.28 = building H, level 1 (= ground floor).
Coffee breaks are in the entrance foyer of building E.
Lunch break is in building M (Mensa).
ARC 2016
University of Applied Sciences Augsburg
24 June 2016