December - ASID Texas Gulf Coast Chapter
Transcription
December - ASID Texas Gulf Coast Chapter
A N G L E NOVEMBER/DECEMBER 2007 PRESIDENT Lynne T. Jones , ASID President’s Message PRESIDENT-ELECT Peggy Hull, ASID Dear Members, PAST-PRESIDENT Peggy McGowen, ASID, CMKBD FINANCIAL DIRECTOR Hallie Radcliffe, ASID Wow! Our ASID new year was kick started with a bang when The Resource Center, located at 7026 Old Katy Road, hosted our first ever ASID Progressive Cocktail Party on Tuesday evening, October 9, 2007. This party was held to celebrate the move to our new home, Suite 285, The Resource Center, as well as to welcome and introduce the new TGCC ASID Board for 2008. COMMUNICATIONS DIRECTOR Sylvia Fullerton, Allied ASID PROFESSIONAL DEVELOPMENT DIRECTOR Pamela Hoffer, Allied ASID MEMBERSHIP DIRECTOR Martha Lurie, IP Member ASID DIRECTOR AT LARGE Manchester Carpet, in Suite 100, started the ball rolling by hosting our October ASID Joint Board Meeting in their lovely showroom. This was also the starting point for the party, so Bud Seaman, owner of Manchester Carpet chose to serve delicious finger foods from the Landry Restaurant Group, as well as apple martinis. Bud, you really outdid yourself! The guests were treated to sumptuous fare at each stop along the way, and then at 7:45 we stopped off at Charlotte Nail Antiques to pick up our ASID 'Hard Hats' and then ended the evening with a special champagne toast to our new location, in Suite 285. LUXE Magazine was a special sponsor of the event and each guest was treated to the latest issue of LUXE upon leaving the party. Michael Williams, IP Member ASID STUDENT REPRESENTATIVE TO THE BOARD Jason Broughton, Student Member ASID We had a tremendous gathering of interior designers, industry members, and guests, as well as an impressive representation from the Houston area media, all eager to tour the showrooms of the participating Industry Partners showrooms that evening. ASID would like to thank the following IP Showrooms for their generous hospitality that evening. AQ Interiors, Alkusari Stone, Ashly Antique Decorative Rugs, Bunch & Shoemaker, Charlotte Nail Antiques, Definitive Paint, Decor and School of Decorative Arts, Design House, Leisure Collection, Lucky Gem Imports Oriental Rugs, Manchester Carpet, Marc Anthony Rugs, MCA Systems, Inc., and Silk Arboretum. NEWSLETTER COMMITTEE Chair, Letecia Ellis, Allied ASID Member Connie Blessitt, Allied ASID Member Paige Haynes, Allied ASID Member Many thanks to Grant & Sheri Roane, and Jim Hardy, owners and managing partners of The Resource Center, for welcoming our chapter to your beautiful property with open arms. We are excited about the re-location of our offices and we look forward to a long and fruitful relationship with you. And we appreciate very much the warm welcome that we have already experienced. ASID TEXAS GULF COAST CHAPTER OFFICE Linda Marble, Administrative Director 7026 Old Katy Road, Suite 285 Houston, Texas 77024 T: 713-626-1470 F: 713-965-0846 asid@asidtgcc.org www.asidtgcc.org NATIONAL ASID OFFICE 608 Massachusetts Ave. N.E. Washington, D.C. 20002 T: 202-546-3480 F: 202-546-3240 asid@asid.org www.asid.org I would also like to thank the ASID task force comprised of Bob Mitchell of M&M Carpet, Donna Jarnagin, ASID, Steve Addiego of G&S Draperies and Donna Vining, FASID, for finding the very best home for our Texas Gulf Coast Chapter. John Robinson, FASID and Marlys Tokerud, ASID are collaborating on an exciting design plan for our new space and I want to thank them for sharing their time and their talent for the benefit of the chapter. And to Linda Marble, our cont. on page 4 UPCOMING EVENTS November 5 First Annual ASID Golf Tournament Monday, November 5, 2007 Wildcat Golf Club January 7, 2008 NCIDQ Registration/Informational Meeting Monday, January 7, 2008 at 6 pm ASID Office – 7026 Old Katy Road, Suite 285 D E S I G N E R ’ S Member Support Thank you for your support It is with sincere thanks that I send out my deepest gratitude to the Design Community for the many kind responses I have received since Emmet's death. I am doing my best to get out thank you notes and express how much I appreciate all of you. Please know that Glenda, Elias and I look forward to seeing you all and hope you can come see us soon. Fondly, Jennie Perry Emmet Perry & Co. Fine Carpets and Rugs Knowledge Designer for a Day By Pamela Hoffer Designer for a Day has been postponed for this Fall & Holiday Season. Please put this on your calendars for the Spring Spruce Up in May. More information to follow. Member Support Peer Table Meeting By Cheryl Donahue, FASID Due to the hectic pace of the Holiday Season, we will not be having another Peer Table formation meeting until the first of the year. Be sure to look for the date of that meeting and information about the Peer Tables in the next issue of our newsletter. If you have never been on a peer table, it is truly hard to realize the benefits and advantages that come from communicating with and sharing ideas and experiences with others in your design profession, so please consider joining us in the New Year. Peer Groups are composed of 8-15 members including both industry partners and professionals. Meetings are managed by the members of the group. Activities and meetings may consist of goal setting, speakers, field trips, networking, problem solving, social events, and learning to solve problems. If you want support in your business, then come see what a peer group can do for you! If you would like to know more about Peer Tables, feel free to call Cheryl Donaho, FASID with any questions you have at 713-972-9710. Again, remember to look for the date and time of the next Peer Group formation meeting in the next issue of the ANGLE. We will form peer tables from the participants at that meeting, so it is imperative that you attend. RSVP to the ASID office, 713-626-1470 to say that you will be attending. A N G L E Knowledge Spring 2008 NCIDQ Exam Study Group Information By Hallie Radcliffe, NCIDQ Co-Chairman and Marni Molinaro, NCIDQ Co-Chairman The ASID Texas Gulf Coast Chapter and IIDA Houston City Center have developed a study prep class for the NCIDQ Exam. We will have an information/registration meeting at 6 p.m. Monday, January 7, 2008 at the ASID Office in: The Resource Center, 7026 Old Katy Road, Suite 285, Houston, TX 77024. Bring your letter from TBAE to the informational meeting stating that you are approved to take the NCIDQ Exam for Spring 2008. Registration is limited to 20 with priority given to those who are taking the next scheduled NCIDQ Exam April 4-5, 2008. The Study Group is facilitated by ASID/IIDA licensed designers who have passed the exam. We are volunteers, not representatives of NCIDQ and the class is not sponsored by NCIDQ. The class for the Spring 2008 NCIDQ Exam will be held on nine Monday evenings (6 p.m. - 9 p.m.) beginning January 28, 2008 at WHR Architects 1111 Louisiana 26th Floor. The cost for the Study Group is $125.00 for ASID or IIDA members, $175.00 for non-members (make checks payable to ASID.) Topics covered include Principles and Practices of Interior Design, Contract Development and Administration, and Schematics & Design Development. We are currently looking for other members who have passed the NCIDQ Exam to assist in teaching the Study Group. For further information about the Houston Study Group or to be on our committee, contact Hallie Radcliffe at: radcliffedesign@aol.com or Marni Molinaro at: marni.m@comcast.net. REGISTRATION FOR THE SPRING 2008 NCIDQ EXAM If you intend to take the April 2008 Exam you should contact TBAE (Texas Board of Architectural Examiners) as soon as possible to begin the process of registration. You must have your paperwork to TBAE by December 1, 2007 to be eligible to take the Spring 2008 Exam. Contact Jackie Blackmore with TBAE at (512) 305-8527 or contact her via the internet www.tbae.state.tx.us NCIDQ EXAM DATES FOR 2007 & 2008 – Tentative Schedule December 1, 2007 NCIDQ Application Deadline (for first-time applicants only) for the Spring 2008 Examination April 4-5, 2008 Spring NCIDQ Examination June 1, 2008 NCIDQ Application Deadline (for first –time applicants only) for the October 2008 Examination October 3-4, 2008 Fall NCIDQ Examination NOW IS THE TIME TO FIND OUT WHAT YOU ARE MISSING! Angle • Texas Gulf Coast Chapter 3 D E S I G N E R ’ S Member Support Become Active in ASID TGCC By Sylvia Fullerton, Allied Member ASID, RID With the upcoming re-location of our Texas Gulf Coast Chapter's ASID offices to the Resource Center, in the very near future also comes a strong desire to get re-acquainted with members that we have not seen or heard from in quite a while. We invite everyone to join us for all of the upcoming TGCC-ASID activities. We have a strong chapter and a fine history within the ASID family and design community as a whole. This reputation comes from past Texas Gulf Coast Chapter presidents and board members, along with all of the various committees who have worked very hard to make a difference. There are so many new and exciting activities going on within our chapter that our new ASID Board's desire would be to have more of our members participate and then give us feed-back. We hope to contact each and every one of you this upcoming year and we look forward to seeing old and new faces alike. Check the local ASID website at www.asidtgcc.org to stay abreast of all upcoming events, programs and meetings. Community Golf Tournament The First Annual ASID Golf Tournament benefiting Habitat for Humanity will be Monday, November 5, 2007 at the Wildcat Golf Club. This will be a tremendous fund raising event for both ASID and Habitat for Humanity. We will have a fun round of golf, as well as great auction items, door prizes and a dinner. Come and join in the fun for a worthy cause. Join ASID, along with our Industry Partners, and some major national product sponsors, for a memorable day at Wildcat Golf Club. It doesn't matter what your handi-cap is... (or whether you even play golf or not) This is a scramble format, so everyone is welcome. Whether you plan on playing or not, please come out for dinner and support your Texas Gulf Coast Chapter of ASID and the local Habitat for Humanity program. You don't want to miss out on the fun! Our own talented Jeremy Wells, an Industry Partner and owner of Imago Dei, will chair this exciting event. Attention! A N G L E cont. from page 1 tireless Administrator, for all that you do to run our office and keep us on track: Thank You! In past few weeks, I have had the honor and the privilege of speaking to three of our ASID Student Chapters; The Art Institute, The University of Houston, and the Houston Community College, Downtown Campus. It is exciting to meet and greet these impressive students. So much enthusiasm; so much energy! I would urge each of you to encourage these student members to come to our monthly programs and other TGCC ASID events, as we can learn as much from them, as they can gain from us. It is a positive, win-win situation when our ASID Students get involved. They are the future of our industry as well as the future of our chapter. I would like to welcome and introduce the new public relations consultant for our chapter; Alton LaDay of The LaDay Group. Alton is thrilled to be partnering with ASID, and has so many exciting and cutting edge ideas for us, that it would take another page of this newsletter to list them all. I would encourage each committee chairman to be in contact with Alton for any of your upcoming events. He is eager to get started and can be reached at alton@theladaygroup.com. Please also copy Sylvia Fullerton, Allied Member ASID, our new Communications Director, on any event news that you may have. She can be contacted at sylvia@designprofile.net. Many thanks to Sandy Sawyer & Syd Farber, co-chairs of the Programs Committee. Sandy and Syd and their committee members are already hard at work and have some amazing programs planned for us beginning in January 2008. I just want to commend you for your dedication to our chapter and for striving to come up with such beneficial and unique monthly events for our membership. I really appreciate your efforts and I know that our entire chapter enjoys and looks forward to the upcoming programs. The 2008 ASID Woodlands Showhouse is in good hands with Co-Chairs, Donna Vining, FASID, Jane Brown, Allied Member ASID, Alison Dominguez, ASID & Temra Krehmeier, Allied Member ASID, leading the way. This committee has already met with each participating designer and reviewed their selections and discussed their concepts. This house will be a true representation of Green as well as Universal design and we are excited about this collaboration with Post Homes, the fine home builder that TGCC ASID partnered with last year. Please see more information regarding the ASID Woodlands Showhouse under Community news found in this newsletter. Finally, in closing, I would like to thank our Past President, Peggy McGowen, ASID, for a job well done and for her help and encouraging words to me as I emb ark on this journey. I am honored to be serving the Texas Gulf Coast Chapter of ASID as your 2007-2008 President and I look forward to the exciting year ahead. My Best, Board Meetings are held 4:30pm on 2nd Tuesday of each month. Be sure to check the ASID website for updated meeting location information. Lynne T Jones, ASID President ASID Texas Gulf Coast Chapter Angle • Texas Gulf Coast Chapter 4 ARIZONA TILE Experience a vast selection of porcelain, glass, ceramics and natural stone that will truly elevate any design. At Arizona Tile, there’s a world of surfaces waiting to be explored. Through our exclusive relationships with select quarries and suppliers, you will discover stunning surfaces you won’t find anywhere else on Earth. For showroom locations and a look at our complete collection, visit www.arizonatile.com. We invite you to visit our new location in Houston: 10811 S. Westview Circle Dr. 77043 (713) 468-0511 Angle • Texas Gulf Coast Chapter 5 D E S I G N E R ’ S A N G L E Community ASID Office Moves to Resource Center ▼ Lynne Jones, ASID President, Grant Roane, Owner and Manager of the Resource Center, and Peggy McGowen, ASID Past President signing the contract for the new ASID Office at the Resource Center. The ASID Task Force, Bob Mitchell, Donna Jarnagin, Steve Addiego and Donna Vining, celebrate with Grant & Sheri Roane, along with Lynne T Jones. ▼ Donna Jarnigan, ASID, Lynne Jones, ASID President, Grant Roane, and Peggy McGowen, ASID Past President The ASID Champagne Toast! from left to right: Diane Alexander, ASID with several of her Art Institute students, Steve Addiego of G&S Draperies, Bob & Molly Mitchell of M&M Carpet and John Broderick of The Houston Showroom Bob & Molly Mitchell of M&M Carpet Showroom, Debbie Pierce and Jeremy Wells of Imago Dei Gallery, Greg Schenck of Schenck & Co., Michelle Maresh of MECA Publishing, Lynne & Russ Jones The 2008 TGCC ASID Board pictured with Joe Lattimer of LUXE magazine and Sheri Roane, representative of The Resource Center. From left to right: Jason Broughton, Michael Williams, Sylvia Fullerton, Peggy Hull, Lynne T Jones, Joe Lattimer, Martha Lurie, Pam Hoffer, Peggy McGowen & Sheri Roane Taken in the MCA Systems showroom from left to right: Art Fano of MCA Systems, Martha Lurie, Membership Chair and owner of John Brooks Showroom, Jeremy Wells of Imago Dei Gallery, Lynne T Jones, President, Federico Fano of MCA Systems & Nubia Heinz of Sherwin Williams Angle • Texas Gulf Coast Chapter 6 RIVER OAKS RUGS Angle • Texas Gulf Coast Chapter 7 D E S I G N E R ’ S A N G L E Knowledge September’s ASID Program: “Take the Leap” Another successful program for ASID was sponsored and hosted by Western Brick in their beautiful new showroom at 7620 Washington Avenue. The subject: when and how to grow your design business, was presented by a panel of ASID designers who have become experts by successfully growing their own businesses and they were gracious enough to share their expertise and advice with the audience. The designers, Connie LeFevre, ASID of Design House, Audrey Drought-Mitchell, ASID, of Audrey Drought Design, Inc., and Debbie Baxter, ASID, of Baxter Design in San Antonio tackled issues ranging from the necessity of hiring consultants, how and when to hire employees, financing your business, risk factors, business practices, office space and more. Sarah Eilers, ASID of Lucas/Eilers Design Associates took on the task of moderating the panel and skillfully selected questions that had been submitted by the audience of ASID designers and IP members. They all did a fantastic job of covering a huge subject and we are so grateful to have had their participation. Everyone came away from the meeting with more knowledge and a greater sense of awareness on expanding their own design business. ASID extends a big thank you to Ginny Gay, ASID and Peggy Baker, ASID, Program Committee members who did such an excellent job of putting this program together. We would also like to extend our appreciation to Western Brick and Inna Zelondzhev, their showroom manager, who organized the space and planned the superb hors d’ouvres and wine that were served. Angle • Texas Gulf Coast Chapter 8 FERGUSON.COM/DESIGNER KOHLER ® : CIMMARONTM ENSEMBLE WITH CLASS-FIVETM ECOSMARTTM FLUSHING SYSTEM GOOD FOR THE PLANET AND GOOD FOR BUSINESS . FERGUSON Green products for the home are becoming all the rage. At FERGUSON, we’ll help you satisfy your clients’ desire for products that are eco-friendly, functional and, of course, beautiful. Our showroom is the perfect place to come explore the latest green products from Kohler. No doubt about it, green has arrived. Make the most of it at FERGUSON. OUR SHOWROOM IS YOUR SHOWROOM. SM PROUD MEMBERS OF THE AMERICAN SOCIETY OF INTERIOR DESIGNERS VISIT A FERGUSON SHOWROOM TODAY. WWW.FERGUSON.COM/DESIGNER KOHLER ® : WELLSPRINGTM TOUCHLESSTM FAUCET © 2007 ferguson Angle • Texas Gulf Coast Chapter 9 D E S I G N E R ’ S A N G L E thank Community Publishing & Design Inc. Industry Partner and Publisher for ASID Chapters Support our Advertisers you T O T H E California North California Orange Cty. California Pennisula California San Diego Carolina Colorado Connecticut Georgia Illinois Los Angeles Maryland Minnesota New England New Jersey Oregon Pennsylvania East Texas Texas-Gulf Coast Virginia Washington DC Metro T R A D E ASID Woodlands Showhouse 2008 ASID is once again collaborating with Post Homes, LTD, and Breast Cancer for the 2008 Woodlands Show House. Post Homes is excited to create a luxury livable experience in the Villages of East Shore, just two homes down from last years show house. The home will combine Old Southern charm with a luxurious sense of livability while incorporating Universal and Green design. With distinct period architecture and today’s amenities the home will feature elaborate interiors with a tranquil outdoor experience. With the teamwork of Post Homes and ASID this home is sure to be an extraordinary estate complete with pool, summer kitchen, gazebo, home theatre, carriage house and more. We expect the sales price of the home to be $2,750,000.00! The home will be advertised extensively through ASID and the Woodlands efforts. The home will be open to the public Oct 4 – Oct 19, 2008. For Advertising Information 972-562-6966 • adinfo@dsapubs.com If there are any other questions, please contact Donna Vining, FASID, chair at donna@viningdesign.com If you would like to sign up to docent or serve on a showhouse committee, please email us at asid@asidtgcc.org If you would like to provide product, please email us at asid@asidtgcc.org Member Support Director’s Corner By Linda Marble, ASID TGCC Director The new ASID Directory should be out by the end of November. Also, the ASID office has moved to the Resource Center. The new address is 7026 Old Katy Rd. Suite 285, Houston, TX 77024. The ASID Office will office out of our tempoary location in Suite 233 at the Resource Center. Please note that the phone number and fax number has not changed. Vi sit www.thi bautdesign.com or call 800-223 -0704 for showroom list in gs and collec tion informa tion. Angle • Texas Gulf Coast Chapter 10 Angle • Texas Gulf Coast Chapter 11 N A T I O N A L N O T E S Knowledge ASID’s New CEU Requirements The Road to Professionalism Does this requirement apply to me? Every practitioner member of ASID must take continuing education. This includes every ASID member in the Allied or Professional Membership categories. Note that members in the following categories are not required to fulfill the continuing education requirement: Professional Inactive, Professional Life Member, Professional Retired, Industry Partner, Student Member. What if there are special circumstances that prevent me from earning my CEUs? The ASID Board of Directors may grant an adjustment to the requirement for poor health, certified by a physician; a specific physical or mental disability, certified by an appropriate health care professional; extended duty with the armed forces; or for extreme hardship, which, in the board’s judgment, makes it impossible for the member to comply. Requests for an adjustment to the continuing education requirement must be made no less than three months before the end of the current reporting period. How much continuing education must I take? The policy requires successful completion of at least 0.6 Continuing Education Units (CEUs), equal to 6 contact hours of approved continuing education coursework, during each two-year reporting period. May I count continuing education hours I’ve already taken? Members may not “bank” CEUs from one reporting period to the next. You may only count those hours taken during the specified two-year reporting period. For the first reporting period, only CEUs earned between January 1, 2008, and December 31, 2009, will fulfill the requirement. I just joined ASID as an Allied or Professional Member and am in my first reporting period. Do I immediately need to begin taking continuing education? Yes. However, the number of CEUs required during your first reporting period will vary, depending on the time of year your membership status changed. • 18 - 24 Months before the end of the reporting period = 0.6 CEUs required • 7 - 17 Months before the end of the reporting period = 0.3 CEUs required • 0 - 6 Months before the end of the reporting period = No CEUs required Who are approved CEU providers? ASID will recognize continuing education coursework (courses, workshops, distance learning programs, telecourses, conferences, seminars, etc.) as successfully fulfilling your CEU requirements only if the coursework is “approved” by one of the following entities: • IDCEC Approval System • State Regulatory Board • Colleges, universities, and other degree-granting institutions offering degrees (e.g., B.S., M.S., Ph.D.) and credit-bearing certificate and diploma programs in interior design that are accredited by the Council for Interior Design Accreditation (CIDA, formerly FIDER). Is there any limitation on the subject matter of the courses I take? No. ASID is not imposing any CEU mandates for health, safety and welfare coursework at this time. We encourage you to select coursework that supports your own professional development plan and advances your professionalism as an interior designer. cont. pn page 14 Angle • Texas Gulf Coast Chapter 12 Drop in, or carry out. ProSource ® offers the design professional all the most exciting, exquisite, in-demand styles and patterns from the world’s leading flooring manufacturers. Manufacturers like Masland®, Expressive Design®, Bigelow®, Pergo®, Bruce® and Stanton®, just to name a few. Even better, we offer our Members options. You can carry samples out, or bring your clients in to make their selections. We have a 24-hour ProKey option so you can come in whenever it is convenient for you and your clients. It’s one-stop shopping at its best. The only thing we don’t offer is drive-through service–yet! ProSource of Clear Lake 16933 North Texas Avenue Webster, TX 77598 Tel: 281-338-1088 ProSource of Houston 4730 Blalock Road Houston, TX 77041 Tel: 713-692-9595 ProSource of Houston Design Center 3801 Kirby Road #151 Houston, TX 77098 Tel: 713-630-6522 ProSource of Sugarland 4323 Greenbriar Drive Stafford, TX 77477 Tel: 281-242-0845 ProSource of Woodlands 503 Spring Hill Drive Spring, TX 77386 Tel: 281-292-8450 Urban Matrix by Wood-Mode. Reflect your own personal style. Whatever your inspiration, the experienced design professionals in a Wood-Mode showroom can help you create the exact look you’ve always wanted for your home. Stop in soon and ask for your copy of our Design Portfolio. www.wood-mode.com For your home. For your life. MUSEUM DISTRICT THE DECORATIVE CENTER Kitchen & Bath Concepts 713.528.5575 Cabinet Innovations 713.461.6424 RIVER OAKS INNER LOOP CLEAR LAKE K&N Builder Sales 713.868.3611 Cabinets & Designs 713.627.8970 Bay Area Kitchens 281.338.2737 Angle • Texas Gulf Coast Chapter 13 N A T I O N A L N O T E S Knowledge Interiors 08 Mark your calendar for the nation's leading conference for interior designers. INTERIORS 08: The ASID Conference on Design will be held on March 13-16, 2008 at the New Orleans Marriott. Build professional relationships with hundreds of design visionaries and experience the power design has to inspire, transform and protect. Learn from proven leaders on the forefront of the creative landscape like Jean-Michel Couseteu, educator, environmentalist and film producer and Rosemarie Rosetti, PH.D., president of the Universal Design Living Laboratory. Heian Art: Japanese Antique and Contemporary Art Akira Kurosaki Exhibition is held at the Museum of Printing History though Dec. 25th 2007 1324 West Clay St. • Houston TX 77019 Tel. 713-541-0203 • 888-333-6254 www.japaneseantiqueart.com • art@japaneseantiqueart.com cont. from page 12 What records will I have to keep? It is the responsibility of each ASID practitioner member to maintain personal files documenting successful completion of your continuing education coursework. This documentation/file for each course or program should be kept for four years from the date of course completion. If you are selected for an audit, you must present ASID with your verification of attendance or the completion certificate for all coursework. Do I have to submit my records for each continuing education course to ASID? ASID wants to make reporting as easy as possible for members. You will be asked to certify only that you have or have not successfully completed your CEU requirements as required during that two-year reporting period but most will not need to submit records for each course. The only exception will be in the event you are one of the members selected for an audit, in which case more detailed records will be requested. What will I have to provide if there is an audit of my continuing education records? If you are selected for an audit, you must present ASID with a copy of the certificate of completion or a letter of verification that was issued by the sponsor of each continuing education course completed during the reporting period being audited. Please note that a summary report of your continuing education activities provided by NCIDQ or your state’s regulatory board is also acceptable. Angle • Texas Gulf Coast Chapter 14 Create new business and financial success by selecting from a variety of keynote, classroom, experiential and peer-to-peer learning opportunities focused around the issues you need to know about right now including: • Business Expertise • Generational Design • Luxury Markets • Future Trends • Society & Environment Visit the website at www.asid.org/interiors to sign up for email updates What if a course I’ve taken wasn’t approved for CEUs and I want to use it to fulfill my requirement? If the course is not pre-approved for CEUs, you may submit it for evaluation using the “Individual CEU Approval Form.” ASID will submit the course to IDCEC for approval on your behalf. If the course is approved, you will receive confirmation in approximately six weeks. If the course is not approved, you will also be notified. All such decisions are final. What if I fail to report my successful completion of the CEU requirement to ASID upon request? Failure to report your compliance with this policy will result in an automatic audit at the end of the reporting period. What if I fail to complete the required number of continuing education hours or CEUs by the end of the reporting period? The ASID Board of Directors, at its discretion, may issue you a conditional extension (probationary period) during which you will be required to remedy the continuing education deficiency. If the requirement remains unmet during the next reporting period, your membership in ASID will be terminated. N A T I O N A L N O T E S Vi si t www.thi bautdesig n.com or call 800-223 -0704 for showroom list i ngs and collec tion inform ation. 717 Rosine Street • Houston, Texas 77019 Office (713) 942-8676 • Fax (713) 942-7606 "Crafting Timeless Furnishings" Handcrafted Custom Iron Furniture Custom Lighting Fixtures Custom Drapery Rods & Hardware Bring Your Designs, Your Ideas, And Your Imagination Angle • Texas Gulf Coast Chapter 15 S T U D E N T N E W S Knowledge The Gathering 2007 The Gathering was held at the ASID Texas Gulf Coast Chapter office on Saturday, September 15. A huge turnout of approximately forty-five students and several faculty representatives made for a productive day. Each school in the chapter was represented; including the Art Institute of Houston, Houston Community College, Kingwood College, Lamar University, Sam Houston State University, San Jacinto College, Stephen F. Austin University, and the University of Houston. The Gathering is held each year for student chapters to help inform and support incoming board members in their pursuit of promoting ASID among interior design students. In addition to the training, which addresses the function of Student Chapter Boards and the responsibilities of board officers, committees were formed to help with this year’s student activities. RealWorld DesignWeek, a nationally sponsored student experience, will be introduced this year. Planning has also begun for Career Day 2008 to be held on Friday, April 18, 2008, at the Resource Center. Professional Members, Industry Partners, and any design related firm seeking qualified interior designers are invited to participate. Several Professional Board Members shared their enthusiasm for ASID and their professional experience with the incoming Student Chapter Board Officers form the member schools. Cecilia Pacheco, Student Affairs Chair welcomed the large gathering of students. Lynne Jones, ASID-TGCC President, covered upcoming ASID events and the many benefits of membership in our professional organization. Networking ideas through the use of peer group tables was introduced by Peggy Hull, Financial Director and President-Elect, and Pam Hoffer, Professional Development Director offered sage advice about the daunting NCIDQ experience. Michael Williams of Tufenkian Carpet and Director at Large, also, an advisor at Kingwood College is excited about organizing and promoting Career Day 2008. Dan Hawkins from Houston Community College, the outgoing SRB and Jason Broughton, incoming SRB from the Art Institute of Houston organized the event. Membership Director, Martha Lurie of the John Brooks Showroom was there to meet and greet all of the potential new ASID members. Ultimately, success of the program was ensured by the efforts and contributions of Linda Marble, our ASID Director. Thanks to all of the students and faculty representatives who gave up their Saturday morning, some, driving several hours to attend this event. Thanks also to the professional board members for their knowledge and support. Enrollment is at an all time high at every school in the chapter. Student involvement is paramount in maintaining the vitality of the American Society of Interior Designers. Angle • Texas Gulf Coast Chapter 16 S T U D E N T N E W S FREE DELIVERY AND INSTALLATION 1640 LAKE WOODLANDS DRIVE THE WOODLANDS, TX 77380 281-364-9799 www.woodlandsruggallery.com Angle • Texas Gulf Coast Chapter 17 G R E E N D E S I G N Knowledge Green Points Source: Ideal Bite 1. Motion Sensors • Lower energy use. Motion sensors use 50% less energy per light, since many of us tend to leave lights on even when we're not using them. • Utility bill savings. The average homeowner spends $100 each year on lighting. Combined with high-efficiency bulbs, installing motion sensors on your most-used fixtures will cut this number in half. • Convenience. No more fumbling around in the dark for light switches. • Safety. Outdoor motion sensors deter creeps from hanging around your place. Try This • Isole Plug Load Control - great for under your desk; plug lamps and appliances into this surge-protecting, motion-sensing power strip. • First Alert Sensor Socket - plugs into your regular light sockets. • Heath Zenith Security Light - basic outdoor security light detects motion up to 70 ft. • Maxxima Occupancy Sensor Light - great for bathrooms, with three superefficient LED bulbs 2. Conserving Water • Saving water. Con your fave handyperson into fixing pesky leaks one drop per second can add up to 165 gallons per month. • Saving more water. Low-flow showerheads and faucet aerators are inexpensive and easy to install, and cut water use in half. In a household of four you'll save as much as $250 per year on water bills. • Saving even more water. By keeping your shower time under five minutes, you can save as many as 1,000 gallons per month. • Cleaner bodies. You wash their back, they'll wash yours. Try This • Oxygenics Five Star Resort Spa Series - these showerheads save water without sacrificing water pressure. • Lowest Flow Showerhead - gives good spray while using 1 gallonper-minute less than most showerheads. • Touch Flow Swivel Spray Aerator - for your sink; offers several different spray options. 3. Cloth napkins Researchers at Cornell University have created a napkin that changes color when it detects biohazards such as E. coli. cont. on page 19 Angle • Texas Gulf Coast Chapter 18 G R E E N D E S I G N • Paper savings. Americans use an average of 2,200 paper napkins per person per year. • Elegance, that is, if you don't use your napkin to blow your nose (you heathen Biter, you). • Cash savings. It's actually cheaper to throw cloth napkins in the wash than to buy paper ones. Amen to that! Try This • Transylvanian Images Vintage Napkins - off-white hemp-cotton blend; hand-spun. • Fiberactive Quilt Company Organic Cotton Napkins - made by laidoff textile workers in North Carolina, in 11 fab colors. • Greenfeet Hemp Napkins - hand-dyed hemp, available in 5 mix-andmatch colors. • Global Exchange Balinese Cotton Napkin Set - fair-trade, produced by a women's co-op in Indonesia, in red or green. 4. Chems in the pool • Safer swimming. When mixed with organic matter, chlorine can form cancer-causing byproducts. • Safer environment. Chlorine levels in pools are 200-400 times higher than what's deemed safe for the environment, plus mercury is a byproduct of chlorine production. • No ghastly chlorine smell. • Better hair days. Non-chlorine cleaners won't turn your hair green. Try This • AquaPure ChlorFree - powdered solution that makes your pool so clean, you can keep fish in it. • Sigma Water Systems Sigma III - silver and copper control algae and bacteria. • Zodiac Nature 2 - contains much less chlorine than regular pool sanitizers and lets minerals do the rest. 5. Lawn-Mowing Lazies Now you have an excuse not to bag your grass clippings. • Free fertilizer. Grass clippings release nitrogen, so you can spend 25% less on fertilizer. • Less synthetic fertilizer means less nitrogen runoff into waterways (too much nitrogen causes algae overgrowth, which kills aquatic life). • Smaller landfills. The EPA estimates that yard waste such as grass clippings accounts for 18% of household trash. • Relaxation. Instead of stuffing bags, you can sit back and enjoy a cocktail. Try This • Compost Guide - if you don't like the look of clippings on your lawn, you can still avoid sending them to the landfill by composting them. cont. on page 20 Angle • Texas Gulf Coast Chapter 19 G R E E N D E S I G N • Earth911 - enter your zip code to see if your city has a program that will compost for you. 6. Print draft Unless you're printing something super important, save ink and paper by using draft mode and, if it's an option, printing double-sided. • Less waste. Each year, the world's discarded cartridges stacked endto-end could circle the planet 3 times. • Cash savings. It's not rocket science: if you print double-sided, you'll buy half as much paper, plus if you print 100 pages in 50% draft mode instead of regular mode, you'll save as much as $2. • Faster printing. In a PC World test, a typical inkjet printed 12 ppm (pages per minute) in regular mode but cranked out 36 ppm in draft. Try This OLD HICKORY FURNITURE SINCE 1898 DALLAS WORLD TRADE CENTER #9009 Customer Service and Catalogue Requests 214-923-1487 • Set your printer (or print software) to draft and double-sided. • GreenPrint - software that weeds out pages you don't want to print. PC-only ($35). • WriteExpress InkSaver - software that lets you control the amount of ink your printer uses, helping you save up to 75% of your ink. PConly ($35). • HP Deskjet 6940dt Color Inkjet Printer - does automatic 2-sided printing ($165). 7. Check the thermostat A RT, A NTIQUES , A CCESSORIES , L IGHTING , F ABRICS , T RIMS , C USTOM P IECES AND Install a programmable thermostat to automatically use less A/C or heat while you're at work and asleep. • Lets you breathe easy. Installing a programmable thermostat in your home will prevent about 1,800 lbs of air-polluting CO2 per year. • Saves about $150 per year on energy bills. • Mercury-free, unlike some old-school thermostats. • Once programmed, saving energy is lazy-proof. U NIQUE , O NE - OF - A -K IND SELECTIONS FROM AROUND THE WORLD IN OUR SOON TO BE 10,000 SQ . FT. EXPANDED SHOWROOM AND DESIGN STUDIO . DESIGN HOUSE, INC. Try This • RiteTemp 7-Day - has a back-lit touch screen, lets you program a different setting for each day of the week ($79). • Honeywell Focus 5+2 - set your weekdays and weekends to different heat/cool cycles ($54). • Clairion Eco-Save 5-1-1 - allows you set different temps for weekdays, Saturday and Sunday, and even shows how much energy you save per degree ($48). • Green Batteries - most models run off rechargeables, so invest in these must-haves (prices vary). 7026 Old Katy Road Suite 115 at The Resource Center, Houston, TX 77024 cont. on page 21 713-803-4949 • Fax: 713-803-4950 email: design@designhousetx.com • www.designhousetx.com Angle • Texas Gulf Coast Chapter 20 G R E E N D E S I G N 8. What’s recyclable Figuring out exactly what's recyclable can be harder than navigating the shoe section during clearance season, but this cheat-sheet makes at least one of these tasks a whole lot easier. • Less confusion. Proper disposal ensures that your recyclables end up in the right place. • Save energy. Recycling an aluminum can takes 96% less energy than creating a new one. • Less landfill. According to the EPA, 75% of Americans' trash can be recycled, but only 25% actually is. • Cleaner groundwater. Most landfill liners are just 1/10th of an inch thick, so toxins from garbage often leak into the groundwater. Try This General • Earth911 - local listings of where you can recycle anything under the sun. • You don't need to remove labels from cans and bottles, but you do need to remove plastic caps (and throw them away). • Your recyclables don't need to be spotless - just not moldy or full of food. Save water - don't rinse 'til clean. Glass • Unbroken bottles are easier for workers to sort than broken ones. Metal • Most containers, such as tins and cans, and aluminum foil. Paper • Newspapers, magazines, photocopies, shoe boxes, envelopes (including ones with glassine windows). Plastic • Plastics #1-#2 – recyclable in most areas. Usually found in 2-liter and detergent bottles, milk jugs and food containers. • Plastics #3-#7 – more difficult to recycle, they are found in Styrofoam, pipes, shrink wrap, padded envelopes, trash liners and more. Check with your local facility to see if it recycles these plastics. • Yogurt Cups - recyclable in most areas, especially the #2 plastic kind. • Grocery Bags - reuse them first! You usually can't recycle them curbside, but some supermarkets have recycling bins in-store. Try to avoid them altogether by bringing your own Biter bag to the store. cont. on page 22 Angle • Texas Gulf Coast Chapter 21 G R E E N D E S I G N 9. Expensive Drink of Water Tap into the cheaper way to stay hydrated. Use a home water filter to nix contaminants, and get a clean-as-bottled (if not cleaner) drinking supply without pouring money down the drain. • More cash in your pocket. On average, tap water costs $0.0015 per gallon; just a 16-oz bottle can cost $2 at the convenience store. • Fewer contaminants. Baddies like chlorine, cryptosporidium, giardia, lead, and pesticide can get into unfiltered tap water, and up to 40% of bottled water comes from regular old city water systems. • Less plastic waste. Americans consume more than 2.5 million bottles of water every hour, and only around 10% are recycled. Try This • So-Clear UnderCounter Perma-Filter - a highly filtrating system that uses recyclable filters and fits under your sink • Brita On Tap System - faucet-mount system you can attach without tools; available everywhere • Pur Ultimate Pitcher - a cool space-agey pitcher option; widely available • Water Filter Comparisons - check out the top 10 home water filters, rated by cost and performance. 10. Unsafe Bottles Haute Couture... high fashion in paint Farrow & Ball C2 Collections of Color Blue Pearl Metallic For the sophisticated aware client who appreciates complex color and demands the ultimate in quality. Time for some bottle therapy. It used to be practically a requirement for the eco-conscious urbanite to lug water in reusable hard-plastic bottles, but it turns out those bottles can leach toxins. Choose lined aluminum, stainless steel, or glass instead. • Health-consciousness. Polycarbonate plastic used in bottles by Nalgene and other companies leaches bisphenol-A, which is linked to birth defects, miscarriage, and prostate cancer. • Less waste. Plastic water bottles require 1.5 million barrels of oil each year to make. • Hydration. Experts recommend we drink six to seven glasses of H2O per day, so keep a bottle handy. • Hipster appeal. Metal and glass options now come in supercool colors and designs. Try This Definitive Paint and Décor Purveyors of fine wall coverings School of Decorative Art The Resource Center 7026 Old Katy Road, Ste 159 • Houston, TX 77024 713-802-9022 www.definitivepaintanddecor.com Angle • Texas Gulf Coast Chapter 22 • Biter Bottles - the lightest, highest quality reusable option is our very own resin-lined aluminum SIGG bottle, in silver and gold. • Kleen Kanteen Water Bottle - made from dishwasher-safe stainless steel and holds 27 oz. • SIGG Kids Series - get lil' Biters started down the healthier path. • VOSS - its water comes in cool-looking reusable glass bottles; buy one, and use the bottle for life. G R E E N D E S I G N Knowledge Help Environmentally Minded Hardwood Customers - Go Green Original article submitted by Kim M. Wahlgren Concern for the environment is back at the forefront of almost everyone’s mind. Everywhere you look someone is talking about the green movement or trying to get their product approved by some green labeling organization. Global warming is a daily topic on the news. Major corporations, even Wal-Mart, are rolling out their own green initiatives. Green building has become more prevalent, including a high-profile overhaul of the entire U.S. Capital complex. Many federal, state and local municipalities have mandated green building for publicly funded new construction. Whether or not you are concerned about the environmental issues, some of your potential customers certainly are. To satisfy them, we must become green-savvy and able to source green products. Keep in mind that “green” means different things to different people. Here is an overview of some of the aspects that can come into play when discussing environmental wood flooring products. Where To Start A first step in discussing wood flooring, as a green product is to throw out conventional logic. That logic says that cutting down trees is bad and destroys the forest. Actually, the majority of professionally managed hardwood forest in the U.S. and Canada today are sustainably harvested. This means that foresters analyze each area of the forest tree by tree and decide what percentage to remove, leaving the majority to grow and the ecosystem intact. In reality, most of the forest in the U.S. and Canada are destroyed by development, and not the need for timber. When forests are given an economic value, it creates an incentive to maintain areas as forest, and not as subdivisions, strip malls or parking lots. Trees are the ultimate renewable resource, helping reduce global-warmingcausing carbon dioxide in the process. The green story for wood includes not only the forest but also the flooring mill. The latest floor manufacturing equipment scans each piece of lumber for its most efficient use, and oftentimes, the wood dust created in the milling process is then used to power the mill or the dry kilns. Engineered wood flooring, by its nature uses the raw material even more efficiently than solid wood flooring. To lend scientific support to these facts, the NWFA’s Industry Research Foundation has contracted with the University of Wisconsin to conduct an environmental impact study on the Life Cycle Assessment (LCA) of solid wood flooring versus non-wood flooring alternatives. LCA also referred to as Life Cycle Analysis or “cradle-to grave” analysis is defined by the ISO as a systematic set of procedures for compiling and examining cont. on page 24 QUALITY 4922 CORNISH SERVICE SELECTION HOUSTON 77007 800.709.0208 VALUE 713.670.9800 Introducing The New Quartette™ Four-Inch Vane Size from Silhouette® Window Shadings For a wide-open view that’s simply stunning. With the addition of the Quartette™ four-inch vane size, views have never been more expansive. Available in both translucent and lightdimming opacities. Call today to see the newest way to design with light. 7110 Bellerive Houston, TX 77036 (800)392-4336 www.gcwc.com Angle • Texas Gulf Coast Chapter 23 G R E E N D E S I G N Custom Shutters Finished & Installed at Competitive Prices the inputs and outputs of materials and energy and the associated environmental impacts directly attributable to the functioning of a product or service system throughout its life cycle. In this study, wood flooring’s impact in terms of energy consumption, air pollution, water pollution, solid-waste pollution and climate change will be examined relative to competing non-wood products. The results are scheduled for release in October, and an LCA study for engineered wood flooring is to be done next. • Ready Made Panels Hardwood Flooring Choices • Exterior Shutters • Cater to Interior Designers LEUMAS SHUTTERS Manufacturer of Fine Custom Shutters in the Area Since 1973 281.261.1050 • FAX 281.261.1054 leumasshutters@netzero.com 642 Stafford Run Road, Suite F • Stafford, TX 77477 Based on what is already known about wood flooring, it is logical to assume that the LCA study will reveal wood to be an especially green product when compared with other types of floor coverings. But many environmentally minded customers will want to know more than that; they will ask: Which wood floor is the most green of all? While the answer to this question is debatable to some people in the industry, some wood flooring products have impeccable environmental credentials. Reclaimed flooring, whether recovered form the bottom of a river or milled from an old factory floor, is one of them. Another is Cork flooring, made from the bark of a type of oak tree that grows in Spain, Portugal and Morocco. The bark is harvest and grows back without harming the tree. Bamboo (which is a type of grass) is also considered to be green because of its ability to rapidly regenerate. However discriminating environmental customers take care to avoid bamboo products constructed with urea-formaldehyde-based adhesives (some would argue that rapid regeneration doesn’t make a product any greener than wood products from a sustainably managed hardwood forest). Consumers who purchase domestic species can be reasonably confident that the wood came from a sustainably harvested forest. On the other hand with the multitude of exotic species from around the world, it is often difficult to know exactly where the wood came from. Prompted by recent widespread media attention paid to illegal logging overseas, consumers are becoming increasing concerned about the source for their tropical woods. Those looking for a guarantee that their hardwood floor (whether in North America or abroad) came from a sustainably managed forest must turn to one of the certification systems currently in place. • Forest Stewardship Council (FSC): This is the most well-known certification program; FSC is international in scope and has the backing of most environmental groups. Wood is tracked from the forest to the end product • Sustainable Forest Initiative (SFI): Overseen by the Sustainable Forest Board, this certification program was developed by the American Forest & Paper Association. • Canadian Standards Association (CSA): CSA offers the National Standard for Sustainable Forest Management, a chain-of custody program designed to track forest products from the forest to the consumer. Building Green More than likely in the near future you will probably find yourself working on a green-certified construction project. If so, you need to know what the green construction certification programs are, and which wood flooring certifications they accept. Angle • Texas Gulf Coast Chapter 24 G R E E N • LEED: (Leadership in Energy and Environmental Design) – This is the most well-known certification program in the U.S., developed by the U.S. Green Building Council (USGBC). The best-known LEED certification is LEED-New Construction, which is for new commercial and institutional buildings. With LEED-New Construction, wood flooring can earn credits for being rapidly renewable (cork and bamboo), and also for being FSC-certified material. The rapidly renewable criteria and the FSC-only criteria are both being re-examined by the USGBC and Yale School of Forest and Sylvatica, and may be changed to a broader credit taking wood’s LCA into account, and possibility of including SFE and CSA certifications is also being examined. • By the end of this year, a LEED Homes certification is expected to be released. The residential certification parallels much of the existing LEED-New Construction certification guidelines. • A major difference, however, is that the pilot LEED for Homes certification requires that any tropical wood used be FSC-certified (tropical woods are determined by country of origin). This is a change from the typical LEED standards, which usually reward good environmental choices as opposed to punishing practices viewed as negative. D E S I G N program is voluntary and was designed with broad guidelines that can be adapted for different regions of NAHB membership; local homebuilder associations adapt the guidelines for their geographic area. Their guidelines recognize FSC, SFI, and CSA certifications equally. They also reward the use of any bio-based material such as wood, and recycled materials such as reclaimed flooring. The board approved the creation of a national green building program based on the ANSI-certified National Green Building Standard, which is a model for residential construction and renovation scheduled for release in early 2008. The model will be based on the existing model and will give builders a NAHB-backed option for green home certification even if they don’t have a local green building program in their area. • GREEN GLOBES: This certification is for commercial projects and is offered by the Green Building Initiative. It is better known in Canada and is relatively new in the United States. Green Globes recognizes FSC, SFI, and CSI certifications for wood flooring, rewards use of biobased products that are LCA-assessed using approved software and also rewards use of recycled products. Wood Accessories • Another change is that LEED for Homes rewards using wood materials sourced from within 500 miles of the building site. • NAHB: The National Association for Home Builders (NAHB) has offered its NAHB Model Green Home Building Guidelines since 2005. The Eco-friendly wood flooring also involves other products such as finishes and adhesives that should also be green. There is no easy definition for an “environmentally responsible” finish or adhesive. Customers want different features – some want to avoid products containing petroleum, Angle • Texas Gulf Coast Chapter 25 G R E E N while others focus on “natural” ingredients. Some want to safe while using the product, while others take the proximity of manufacturing into account. Still others try to consider the entire LCA of those products although formal LCA is not yet readily available for most finishes and adhesives. Independent green product certification systems such as Greenguard or Green Seal exist but are not widely used in the wood flooring industry. All this considered, the easiest aspect to focus on is VOC content but just because a solvent doesn’t emit VOC’s (Volatile Organic Compounds) as defined by the EPA, doesn’t necessarily mean it’s harmless. The EPA considers VOC’S to be organic compounds that react with nitrogen oxide in heat and sunlight to create ground-level smog. The solvents used in finishes and adhesives determine the VOC content levels. This us usually measured in grams per liter (g/l). The EPA says that architectural coatings (including wood floor finishes) are second only to automobiles between consumer and commercial products as producers of VOC emissions. VOC laws for most finishes have gotten tougher in recent years, especially in California and the Northeast. This resulted in some of the oilmodified polyurethane manufacturers reformulating their products to have lower VOC contents. Nationally, current regulations mandate that VOC levels for most wood floor finishes be less than 450 g/l. In the Northeast and California regulations are tougher. In the Northeast the Ozone Transport Commission (OTC) has a VOC limit of 350 g/l. The state of California has a limit set by the California Air Resources Board D E S I G N (CARB) of 350g/l. The Los Angeles area is set at a lower level of 275 g/l by the South Coast Air Quality Management District (SCAQMD). Waterborne finishes tend to have the lowest VOC levels, and some waterborne products have extremely low levels. Check with the manufacturer and the product’s MSDS. Some products, such as shellac, wax or natural oils seem like they would be environmentally friendly (shellac is created by secretions from the lac bug), however the added solvents that enable the products to be applied to a wood floor have to be considered. The bottom line, regardless of type for any product the contractor should check the MSDS and directions. They give insight into the actual solvents used and can also offer red flags, such as suggestions to turnoff all sources of ignition when using the product (a good indication that a powerful solvent is involved.) Adhesives have also undergone major changes due to VOC laws and the demand for green products. It’s a common joke among veteran wood flooring contractors that years ago they did not have to do drugs – their wood flooring adhesives were enough. Fortunately, for environmentally concerned consumers (and installers), adhesives have come a long way. Today, the CARB limit is 15% by weight (and due to change on January 1, 2009 to 7%) and the SCAQMD limit is 100 g/l. There currently are no EPA limits for wood flooring adhesives, but they are expected to adopt the CARB limits. Several manufactures now offer no-VOC, solvent-free wood floor adhesives. There are no hard and fast rules for which types of adhesives typically have relatively low or no VOCs. There are several high-solids, polymeric resin adhesives and at least one moisture-cure adhesive on the market that are no-VOC or trace-VOC solvent-free. Details on VOC levels and solvents are available to contractors by checking with the manufacturer, and also make sure the adhesive works with the flooring they’ve chosen. Again, MSDS and product directions are a good source for insight on solvents in products. Building certification programs vary on how they treat finishes and adhesives. LEED-New Construction and LEED for Homes: Adhesives and finishes must comply with the VOC limits of the SCAQMD rules(275 g/l for wood floor finish and 100 g/l for wood flooring adhesives. NAHB Model Green Building Guidelines: Wood flooring finishes and sdhesives are not specifically addressed. Green Globes: Credit is given under Indoor Environment rules for “low emitting, chemically inert and non-toxic” chemicals, adhesives and sealant (including floor finishes) OUR DEDICATION IS SERVING YOU Each piece of our domestically produced furniture is handcrafted at our family-owned factory. Our seasoned craftspeople use only the finest materials and techniques available, from our precision-constructed hardwood frames to our butter soft leathers. C.O.M. and other custom requests are a part of our tradition. P.O. Box 1030 • Claremont, North Carolina 28610 • (828) 459-2884 www.mckinleyleatherfurniture.com Angle • Texas Gulf Coast Chapter 26 Wake up everybody, this time around the green movement is not just a fad. Law requires low-VOC products, and green building is increasingly being chosen and even mandated. It is a must that wood flooring professionals, become fluent in the green aspects of the industry, it is not only environmentally responsible but its also good for business. owner The Lonestar Range Hood Company Bob Mathes www.custom-rangehoods.com (T) 713.520.8134 ext 12 (F) 713.526.8541 1226 Jackson Blvd. Houston, Texas 77006 email sales@custom-rangehoods.com Angle • Texas Gulf Coast Chapter 27 I N D U S T R Y P A R T N E R IP Representative’s Message By Christa Sharpe, Unique Carpets Industry Partner Representative Lynne Jones, our incoming President, said Peggy McGowen ‘swore at her or swore her in’ at the board meeting on September 25th at Masraff’s. Although we are all sad to see Peggy move into her new position as Past President, we welcome Lynne as our new President of ASID. She stated at the meeting that her wish is at the end of her term we all say ‘We had fun when Lynne was President’. I am enthusiastic and confident that will be the words on our lips in 2008. We have a great group of board members and chairs this year and I think we should all get to know them and help out in anyway possible. The first big event is our Golf Tournament at Wildcat that benefits our chapter and Habitat for Humanity. I hope we all get involved by volunteering, sponsoring, and yes even participating! This is going to be the first of many and we should all contribute to Industry Partners being a big presence and part of the success. Angle • Texas Gulf Coast Chapter 28 N E W S Jeremy Wells, Imago Dei, along with Lynne Jones will be heading up this function. Kudos to a fabulous idea guys! We continue to grow our membership numbers as Industry Partners, thanks to Martha Lurie, John Brooks, and our membership chair for the second term this year! And as I look back at the last year’s term as your Industry Rep to the board the one thing that sticks out to me is- I don’t know enough about you all! There is a handful that I know pretty well but we decided to do a couple of things different this year to make us a more cohesive bunch. As they say two heads are better than one and to that end- I have a co-chair and I couldn’t be more pleased! Ray Levy, Sunbelt Windowfilm has agreed to help me take this to the next level this term. We want to meet everyone and get to know your business needs and desires so we can represent you in the best way possible to the ASID board. Ray and I will be answering to the Director at Large, Michael Williams, Tufenkian Rugs, and his experience as an Industry Partner for many years has proven to be invaluable. He has helped us form a committee to decide the direction for IP for this term. We have a wonderful bunch that is very enthusiastic and Gung-Ho about achieving our goals this year. The committee members are as follows: Becky Brusen, Dauphin Sales, James Craig, James Craig Furnishing, Ray Levy, Sunbelt Windowfilm, Steve Addiego, G&S Draperies, Michael Williams, Tufenkian Rugs, and Christa Sharpe, Kravet/Lee Jofa Fabrics. If you would like to get involved you are welcome to volunteer for any of the members committees by contacting us at christa.sharpe@kravet.com/ray@sunsmartfilm.com. We won’t have an expo like last year but we do have some really great ideas of how to strengthen our bond with Houston’s Design Professionals such as marketing, website advertising, and sending ‘Welcome Neighbor’ packets with IP gifts and coupons. We also have some ideas on how to get the Design Students engaged with IP members early on to help plant a seed so that when they get out in the business world they’ll remember us. These are just a few teasers of the exciting things to come this year. Member Support Launch Party Industry Partners, Gulf Coast Window Coverings held a wonderful 'Launch Party' at the Petroleum Club in downtown Houston to introduce two new products from Hunter Douglas. One being the new 'Skyline' Gliding window panels. And as always, if you have any ideas or would like to write-up an Industry Spotlight about you, your company, or a new staff member at your company, please contact us at christa.sharpe@kravet.com/ray@sunsmartfilm.com We’re looking forward to a fabulous term as your Co-Chairs, or as Ray likes to call it a ‘Loveseat’-haha. Let us hear from you and we should have a lot of fun! Member Support Janie Ellis the owner of Anything but Plain makes her Television Debut! Amy Gagliano, Brand Manager with Hunter Douglas, Tom Connell, Vice President/General Manager of Gulf Coast Window Covering, Lynne T Jones, ASID, Ron Rubinoff, Vice President & General Manager, Hunter Douglas Long time industry partner, Janie Ellis, ASID the owner of Anything But Plain and Renaissance Plaster appeared on Good Day Houston October 2nd. Janie demonstrated to host Whitney Casey and her audience the beauty of faux finishing and the art of stenciling. Her spot was so successful that she was invited back on October 15th and has been asked to appear on a semi-regular basis. View Janie’s performance on her website www.Anythingbutplain.com Trust with Confidence FRAMEWORK Houston’s Largest Frame Selection Houston’s Best & Longest Running Art Installers The only ASID approved CEU course nationwide: “An Introduction to Window Film” 713 868 0011 Call Ray 281-579-0200 Angle • Texas Gulf Coast Chapter 29 C A L E N D A R O F E V E N T S NOVEMBER FEBRUARY 2008 05 12 Board Meeting TGCC ASID Office, 4:30 pm www.asid.org 28-MARCH 03 Donna Vining, FASID IIDA,RID, CAPS and Tom First Annual ASID Golf Tournament: Benefiting Habitat for Humanity Wildcat Golf Club 07 Beverly Vosko's CEU Compare and Contrast English and French Furniture 9 am - 6 pm 8 CEU including 1 hour Residential Designers Guide to Barrier Free www.vosko.com Decorative Center in room #603 Schwenk of Seminars By Design present their third annual Seminars By Design Cruise and Learn for interior designers, architects and their suppliers 8 new hours of HSW CEU's and 4 hours of Industry Partner Seminars aboard Carnival's 08 Ecstasy of the Sea. For info (713)857-2309 Beverly Vosko's CEU Fabulous French Furniture 9 am - 6 pm 8 CEU including 1 hour Residential Designers Guide to Barrier Free www.vosko.com Decorative Center in room #603 13 Board Meeting TGCC ASID Office, 4:30 pm www.asid.org 14 Accessibility, Profitability, Sustainability and Web Technology: 8 new CEU's from Seminars By Design The Emmet Perry Showroom, 8200-C Washington Ave., Houston, TX 77007, 281-257-2162 Tom@Seminarsbydesign.net www.Seminarsbydesign.net Tom@Seminarsbydesign.net www.Seminarsbydesign.net APRIL 2008 04-05 2008 Spring NCIDQ Examination www.asid.org 08 Board Meeting TGCC ASID Office, 4:30 pm www.asid.org 18 Student Career Day Resource Center DECEMBER 01 NCIDQ Application Deadline (for first-time applicants only) for the Spring 2008 Examination 11 MAY 2008 13 Board Meeting TGCC ASID Office, 4:30 pm www.asid.org Board Meeting TGCC ASID Office, 4:30 pm www.asid.org JANUARY 2008 07 NCIDQ Registration/Informational Meeting Monday, January 7, 2008 at 6 pm ASID Office – 7026 Old Katy Road, Suite 285 08 JUNE 2008 01 NCIDQ Application Deadline for Fall 2008 Examination (for first time applicants only) www.asid.org 10 Board Meeting TGCC ASID Office, 4:30 pm www.asid.org Board Meeting TGCC ASID Office, 4:30 pm www.asid.org OCTOBER 2008 24 Beverly Vosko's CEU The Truth about Rugs and Textiles with Complimentary Lunch by Abraham Oriental Rugs, 3 CEU's 9 AM-12PM plus lunch Decorative Center in room #603 03-04 2008 Fall NCIDQ Examination www.asid.org Calendar of Events dates, times and information are subject to change. Angle • Texas Gulf Coast Chapter 30 SCHENCK & CO PECK & COMPANY
Similar documents
ASID Newsletter - Donna Marcotte Consulting
Also this month, we had the privilege to meet, hear, and visit with renowned interior designer, Thomas Pheasant (see page 5). Following his presentation, Mr. Pheasant took time to meet with the stu...
More information