ENDOPORE® Implant System

ENDOPORE®
Implant System
Implant System
Bereichsbezeichnung
ENDOPORE®
BICORTICAL
®
3-dimensional
bone ingrowth
Unique Design
The Endopore dental implant incorporates a
unique, truncated cone-shaped design that
uses a multilayered porous surface geometry
over most of its length to achieve integration
by three-dimensional bone ingrowth.
Developed in response to the need for a
simpler, less invasive and biologically more
compliant system, the Endopore implant
employs an approach that has been used
extensively for orthopedic joint replacement
fixation since the mid 1980’s.
Endopore’s surgical advantages include:
•a secure, three-dimensional interlocking interface with bone
•predictable and minimal crestal bone remodelling
•greater surgical options with shorter implant lengths
•an uncomplicated surgical sequence
•minimal instrumentation and inventory
Outstanding Success Rates
Endopore’s high rates of success are due
to the Endopore’s engagement with the
alveolar crest by cortical bone ingrowth into
the implant’s interconnecting pores. When
the implant is placed into function, occlusal
loads transferred to the crest stimulate further
cortical bone development in accordance
with Wolff’s law. In contrast, a screw-type
implant is stabilized only by the alveolar crest’s
superior and inferior bone cortices and, over
most of its length, weak cancellous bone. With
threaded implants, the fixation which occurs
at the bone-implant interface can allow for
rotational movement of the implant.
ENDOPORE®
Implant System
Surgical Kit
Surgical Kit
Conveniently, whether you use the External
Hex or Internal Connection Endopore
implant there is one streamlined surgical kit.
Eliminating the need for an elaborate array of
surgical instrumentation. Making placement
very efficient.
•A comprehensive surgical manual is
included with each surgical kit.
•All burs are quad-fluted resulting in
extremely efficient osteotomy preparation.
•Internally irrigated burs ensure that the
surgical site does not overheat, resulting in
an evenly prepared osteotomy.
•A zirconium nitrate coating on each bur
gives an enhanced cutting edge.
Implant System
ENDOPORE®
BICORTICAL
®
ENDOPORE® Implants
Internal and External Connection
One-Stage: Internal Connection
TC
Length
Item No.
All implants are supplied with a low profile cover screw
Platform
TC*
Length
4.1 mm diameter with 4.8 mm platform
1.8 mm 1.8 mm 1.8 mm 7 mm 9 mm
12 mm 01S-7I1.8
01S-9I1.8
01S-12I1.8
5.0 mm diameter with 4.8 mm platform
1.8 mm 1.8 mm 1.8 mm 1.8 mm 5 mm 7 mm 9 mm 12 mm 01WS-5I1.8
01WS-7I1.8
01WS-9I1.8
01WS-12I1.8
Two-Stage: Internal Hex Connection
SCR
Length
Item No.
Diameter
All implants are supplied with a low profile cover screw
SCR**
Length
4.1 mm diameter 2 mm 2 mm 2 mm 7 mm 9 mm 12 mm 01l-7I2
01l-9I2
01l-12I2
5.0 mm diameter 2 mm 2 mm 2 mm 7 mm 9 mm 12 mm 01Wl-7I2
01Wl-9I2
01Wl-12I2
Two-Stage: External Hex Connection
SCR
Length
Item No.
Diameter
All implants are supplied with a low profile cover screw
SCR**
Length
Diameter
*TI
– Transgingival Collar
** SCR – Smooth Coronal Region
3.5 mm diameter 1 mm
9 mm 01M-9I1
4.1 mm diameter 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm 7 mm 7 mm 9 mm 9 mm 12 mm 12 mm 01B-7I1
01B-7I2
01B-9I1
01B-9I2
01B-12I1
01B-12I2
5.0 mm diameter
1 mm 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm 5 mm 7 mm 7 mm 9 mm 9 mm 12 mm 12 mm 01WB-5I1
01WB-7I1
01WB-7I2
01WB-9I1
01WB-9I2
01WB-12I1
01WB-12I2
ENDOPORE®
Implant System
Uniform Stress Distribution –
Long-Term Performance
The design of the Endopore implant permits
uniform stress distribution, achieving improved
osseous fixation at the bone-implant interface.
The significant and on-going crestal bone
loss does not occur. In fact, the minimal bone
loss occasionally exhibited in Endopore users
levels off quickly to clinically insignificant
levels, leading to greatly improved long-term
performance.
Implant System
ENDOPORE®
BICORTICAL
®
X-ray at 6 years in
X-ray at 5 years in
­function
­function
Eliminate Conventional Sinus Elevations
Placed in 6 mm of bone over the Mandibular Canal
X-rays are courtesy of Drs. D. Deporter & R. Todescan
Increased Surface Area
Because the porous design greatly increases
the surface area at the interface between bone
and implant, shorter implants can be used. This
in turn means that Endopore implants can be
used in applications for which much longer
threaded implants would be suitable. With
Endopore, it is often possible to avoid sinus
lifts or other augmentation procedures in the
maxilla and mandible, allowing for less patient
morbidity and for an implant reconstruction
that can be less traumatic and more affordable
for the patient.
Clinical radiographic and histological
examinations have demonstrated repeatedly
that, even with shorter implants, shorter
initial healing periods and simpler surgical
techniques than are customary with other
implant designs, the Endopore implant
offers superior fixation performance.
Most importantly, these results have been
demonstrated to be consistent in clinical
settings, where success rates exceed 96%.*
*Data on file.
Histology
“This histological section shows the implant and adjacent bone. Bone is directly
apposed to and extending in between the sintered particles on the surface of the
implant. There is no fibrous or inflammatory reaction seen at this interface ...”
*Full report on file.
Dr. Rita A. Kandel
Staff Pathologist
Mount Sinai Hospital
Toronto
ENDOPORE® Implant
Internal
Internal Hex
External Hex
Connection
Sybron Implant Solutions
A World of Implant Solutions
The dental implant platform of Sybron Dental Specialties (SDS)
brings together three (INNOVA – ORALTRONICS – ATTACHMENTS)
organizations that have been leaders in implant manufacturing,
design and development since the inception of implant dentistry.
With our most respected, innovative implant systems – PITT-EASY®,
and ENDOPORE® – we are giving you access to a world of implant
solutions.
Manufacturer:
Sybron Implant Solutions
1717 West Collins Avenue
Orange, California 92867 · USA
www.sybronimplants.com
Sybron Implant Solutions GmbH
Julius-Bamberger-Straße 8a · 28279 Bremen · Germany
Phone +49 421 43939-0 · Fax +49 421 443936
www.sybronimplants.de · info@sybronimplants.de
09-0104: 11/07
Distributed by: