CUT FIRE® SYSTEM - General Membrane

CUT FIRE®
SYSTEM
STOPPING THE WATER
STOPPING THE FIRE
PRODUCTS & SYSTEMS FOR THE PROTECTION FROM EXTERNAL FIRE SOURCES
FERMIAMO L’ACQUA
FERMIAMO IL FUOCO
CUT FIRE
®
PRODUCTS & SYSTEMS FOR THE
PROTECTION FROM EXTERNAL FIRE
SOURCES
MAIN ADV
A
NTAGES
N
O
C
H
A
NGES IN T
1 S
HE
2
3
PECIFICA
TECHNICA
L
MEMBRAN TIONS OF THE
ES.
LIFELONG
EFFICACY FIREPROOFING
GUARANT
EED.
FIREPROO
ACTIVATE F PRINCIPLE ISN’T
OF THE MED BY TORCH ON APP
MBRANES
LICATION
.
STOPPING THE FIRE
STOPPING THE WATER
)LUH3UHYHQWLRQRQ5RRÀQJ6\VWHPV
*HQHUDO0HPEUDQH'HIHQGV5RRIV
IURP([WHUQDO)LUH5LVNV
Fire has fascinated mankind ever since it managed to control it,
though it still is an essential force of nature and when not carefully
handled it can cause destruction and devastation.
Roofing systems are particularly exposed to fire risks caused both by
human activities and the presence of critical technical installations
(ex. Photovoltaic Systems) and a fire originating on the rooftop can rapidly
extend to the rest of the building causing structural damage.
Total control of this force is especially important in the building
industry, as the technological advancements and the evolution of
different design choices have greatly enhanced the quality of life, but
also exponentially increased fire risks in modern buildings.
Heavily protected and reinforced roofing solutions can solve this problem
but, due to the vast number of different roof designs existing, are not
always possible or necessarily advisable (Insufficient static load resistance,
type of roof deck, etc..).
This problem has led researchers to investigate the inherent risks in
the materials employed by the building industry and to develop a new
branch of studies called “Fire Risk Engineering” that analyses and
predicts different materials’ reactions and fire development dynamics.
General Membrane, ever sensitive to fire prevention and building envelope
integrity, has developed products and systems capable of satisfying the
need to protect a building from external fire risks. These solutions fulfil
the requirements of the strictest European standards and guarantee
total peace of mind to Clients and Roofing Contractors.
Building materials, including roofing supplies and appliances, are
carefully observed and their fire reaction and resistance monitored and
recorded. These researches have allowed to develop new solutions
capable of offering an effective passive resistance to fire action, thus
helping to preserve for a far greater time the functional integrity of a
building in case of fire.
In the last 15 years over 5 million square meters of Cut Fire ®
waterproofing systems by General Membrane have been installed all over
the World.
The safety afforded to waterproofing membranes by Cut Fire treatment
allows to employ them effectively in roofing projects where normal
bituminous membranes wouldn’t be usually employed. They are particularly
indicated for the protection of wooden framed buildings and for the use on
roofs hosting photovoltaic systems.
&HUWLÀHG3URGXFWVDQG6\VWHPV
CUT FIRE®7HFKQRORJ\IRU
ZDWHUSURRÀQJPHPEUDQHV
General Membrane has supplied waterproofing products and solutions
to Northern European Countries – the first to adopt fire protection
standards in the building industry – for a long time. This experience
has allowed to develop waterproofing membranes and systems,
certified by the most reputable accredited independent institutions in
accordance to strict standards, in order to exceed Clients’ expectations
and guarantee their safety and protection.
Cut Fire® proprietary technology is based on the Research &
Development results of General membrane Laboratories and allows the
membranes to become self-extinguishing and fire retardant.
This innovative technology affords three major advantages compared to
other solutions:
1
UNALTERED
TECHNICAL
SPECIFICATIONS
AND
WATERPROOFING PERFORMANCE OF THE PRODUCTS
Cut Fire® treatment doesn’t chemically alter the compound of the
membrane nor affect its technical performance.
FIRE
PROOFING
PERFORMANCE
REMAINS
INTACT
2 THROUGHOUT THE LIFECYCLE OF THE WATERPROOFING
MEMBRANE
All Cut Fire® waterproofing membranes are tested in accordance with
European Harmonized Test Regulations (UNI ENV 1187/2) and have
allowed General Membrane Roofing Systems employing them to obtain
Broof Certification (in accordance to UNI EN 13501-5 Standards).
FIREPROOFING
PROPERTIES
FIREPROOF TEST
YEARS
CUT FIRE®
+
standard firep
roofing
1
5
10
15
20
Non ageing fireproofing properties are not affected by chemical reactions
to the compound nor do they decay over time due to adverse climatic
conditions.agenti atmosferici e non decade per reazioni chimiche.
FIRE® REACTION IS NOT ACTIVATED BY TORCH ON
3 CUT
APPLICATION OF THE MEMBRANES.
The compound can be heated without Cut Fire® reaction being activated.
&XW)LUH®3URGXFW5DQJH²7KHEHVWSURGXFWIRUDQ\FRPSRXQG
PHOENIX SOLAR TECH CUT FIRE®:
Class E Fire Protection Bituminous Membrane
(UNI EN 13501-1 Standard) employing a
proprietary APAO compound (-35°) specifically
developed for General SOLAR PV® integrated
photovoltaic waterproofing systems.
PHOENIX SOLAR CUT FIRE®:
Class E Fire Protection Bituminous Membrane
(UNI EN 13501-1 Standard) employing
a proprietary APAO compound (-35°)
specifically developed for waterproofing
solutions hosting traditional Photovoltaic
installations. Available in different finishes,
including several mineral protection versions.
I.T.C. issued - D.V.T. certificate n°0007/10
I.T.C. issued - D.V.T. certificate n°0007/10
PHOENIX SUPER CUT FIRE®:
Class E Fire Protection Bituminous Membrane
(UNI EN 13501-1 Standard) a unique APAO
compound that affords the membranes
an extremely low temperature flexibility
(-35°) and extraordinary flow resistance at
high temperatures (140°) and ant ageing
properties (over 30 Years durability). Available
in different finishes, including several mineral
protection versions.
MERCURY P CUT FIRE®:
Class E Fire Protection Bituminous
Membrane (UNI EN 13501-1 Standard)
featuring a distilled bitumen SBS modified
compound with a very high quantity of
elastomeric thermoplastic materials of the
styrene-butadiene-styrene family (SBS).
Available in different finishes, including
several mineral protection versions.
I.T.C. issued - D.V.T. certificate n°0007/10
B.B.A. issued - Certifcate n°99/3586.
PHOENIX STAR MINERAL CUT FIRE®:
Class E Fire Protection Bituminous Membrane
(UNI EN 13501-1 Standard) featuring a
top quality APP compound that combines
extremely high temperature flow resistance
to high values of low temperature flexibility
(-15°).
I.T.C. issued - D.V.T. certificate n°0007/10
B.B.A. issued - Certifcate n°99/3586.
&RPSDUDWLYH)LUH3HUIRUPDQFH
Standard
Membrane
CUT FIRE®
MEMBRANE
RODUCTS & SYSTEMS FOR THE PROTECTION FROM EXTERNAL FIRE SOURCES
&HUWLÀHG3URGXFWV6\VWHPV)RU7KH3URWHFWLRQ)URP([WHUQDO)LUH6RXUFHV
General Membrane has developed several Broof certified waterproofing
stratigraphies (in accordance with UNI EN 13501-5 Standards).
Broof certified systems include Cut Fire® membranes and thermal
insulation layers (mineral fibre, thermoplastic materials, clays).
There are over 250 certified Technical Specifications that meet any
demands the project designer may have. These Specifications offer
solutions to any external fire risk requirement the roofing system may
demand, both in case of renewals and new constructions.
Broof certified systems have been tested on most of the materials
roofing decks may be made of (wood, concrete, sheet metal, pre-existing
membranes), allowing General Membrane to satisfy any need the
roofing project’s designer may have.
6WUDWLJUD
Tetto fred
do
1. Supporto
di
ILDLPSH
UPHDELO
con nuo
va imperm
H1XRY
R
eabilizzazio
base inco
ne in dop
mbustibi
le in clas
pio strato
se 0;
di membra
HDELOHEL
na
WXPLQRV
RJXDLQ
2. Prim
DLQGRS
o strato:
membran
SLRVWUD
3. Seco
WRLQWRWD
a
ndo strat
OHHVSRV
o: membranbitume polimero
L]LRQH
impe
a bitume
4. Modulo
polimero rmeabilizzante
(guaina);
fotov
impe
ovol
perm
oltai
rmea
taico
eabilizzante
co tradizion
zio ale
(guaina);
(rigido).
6LVWHPD
H1XRYR
PSHUPHDELO
6WUDWLJUDILDL
di
in doppio strato
ilizzazione
impermeab
bitume poli
mero
6WUD
ero
bitume polim
membrana
superficiale
con nuova
lamiera);
con finitura
o in legno,
lana di roccia
nto, tavolat
R, lana di roccia,
di base (ceme
LRQH
(EPS, PIR/PU
1. Supporto
RWDOHHVSRVL]
termoisolante
LRVWUDWRLQW
2. Pannello
LQDLQGRSS
4
PLQRVRJXD
a);
UPHDELOHELWX
zante (guain a);
6LVWHPDLPSH
ro impermeabiliz
(guain
bitume polime ro impermeabilizzante
membrana
polime
strato:
rana bitume
3. Primo
3
strato: memb
4. Secondo
(rigido).
2
tradizionale
fotovoltaico
1
5. Modulo
Tetto caldo
LPSHUP
WLJ
UDIL
Tetto
DLP
fredd
SHUP
o co
Supp
n nu
HDE
orto
ova
di ba
LOH
impe
se inc
HP
1X
DLP
rmea
ombu
SHUP
RYR
2. M
stibil
biliz
HDEL
onos
e in
zazi
OHV
class
trato
one
LQWH
3.
: man
e 0;
WLFR
in m
Mod
to im
LQP
ulo
onos
RQRV
perm
foto
trato
volta
ea
WUD
in bitume);
1.
6LVW
ico
bile
sinte
tradiz
tico;
ionale
(rigid
o).
WRLQ
WRWD
OHH
VSRV
L]LRQ
H
FRQ
sint
etic
o
IRWR
YROWD
1RWD7HQ
LFD
L'interven
to
tutti gli elem di impermeabilizz
azione costi
enti di detta
tuisce oper
glio che
garantisc
3
ano la tenu a impermeabile
ta idraulica b FRQWLQXD
dell'edifici
5
4
2
6WUDWLJUDILDLPSH
3
Tetto caldo con nuova
2
UPHDELOH1XRYR
impermeabilizzazione
LFR
LQWH
JUDW
R
HRP
o (muretti RJHQHDsu tutta
la superficie
perimetral
i, volum
della cope
i tecnici,
rtura comp
ecc).
rendendo
anche
1
in monost
1. Supporto di base
anche
1R rato sintetico
(cemento, tavolato
ra comprendendo L'i WD7HQ
2. Pannello termoisol
in legno,
nte
lamiera);
LFD
cie della copertu
la superfi
(EPS,
tutta ante
tutti rvento PIR/PUR, lana di
RJHQHDsu
roccia);
gli ele di
tecnici, ecc).
FRQWLQXDHRP
le FRQ
trali, volumi
eabile
6LVWHPD
mentiimperm
i perime
LPSHUPH
DELOHVLQWHWLFRLQP
ficio (murett
sce opera imperm
ell'edifi
di de eabil
RQRVWUDWRLQWRWDOH
azione costitui la tenuta idraulica dell'edi
1RWD7HQLFD
ttagli izzaz
HVSRVL]LRQHFRQ
scano
di impermeabilizz
ion
o ch
IRWRYROWD
3. Monostrato: manto
L'intervento
io che garanti
LFRLQWHJ
e ga e coUDWR
ti di dettagl
impermeabile sintetico;
ranti stituisc
tutti gli elemen
scan e op
4. Modulo fotovoltaic
er
o la
o tradizionale (rigido).
tenutaa impe
idrau rmeabil
e
lica
dell'e FRQW
dif
1
4t
1t
4s
4
ELOH
HD
DLPSHUP
6WUDWLJUDILDLPSH
di
R, lana
imero
PIR/PU ostrato
me pol
e (EPS,
mon
rana bitu
oisolant ermeabile o
o term
di memb
strato2
mero imp
); Pannell
lamiera a bitume poli
in doppio
legno,
WR
HQ
5LIDFLP
3
Tetto caldo con nuova
t
LQ
icio XDHRP
(mur
etti RJHQ
HD
D su
perimQH
su tut
me
tu ta
etr
tra
alili,,
volum la supe
i tec rficie
nici,
de
ecc). lla co
pe
rtura
comp
rend
endo
o an
che
UPHDELOH1XRYR
impermeabilizzazione
in monostrato di
1. Supporto di base
bran
membrana bitume
azione
lato in
incombustibile in
di mem
DIL
polimero
classe 0;
2. Pannello termoisol
eabilizz
strato
DWR
ento, tavo pio
ante incombustibile
dop 1
e (cem
imperm
RLQWHJU
6WUDWLJU
in classe 0;
o di bas me); Mono o
nuova
RYROWDLF
Support
bitu
do con
FRQIRW
6LVWHPDLPSHUPH
to da:
iale in
RVL]LRQH
DELOHELWXPLQRVR
Tetto cal
e costitui
superfic
DOHHVS
JXDLQDLQPRQRV
esistent con finitura
WUDWRLQWRWDOHHVSR
WRLQWRW
chetto
VL]LRQHFRQIRWRYR
roccia
3. Monostrato: membran
SLRVWUD 1RWD7HQLFD
1. Pac
GRS
lana di
OWDLFRLQWHJUDWR
o;
a
ia,
DLQ
bitume polimero
rocc
sintetic
XDLQ
L'intervent
impermeabilizzante
o di impermeabilizzazion
eabile
ina);
LQRVRJ
(guaina).
e costituisce opera
imperm
;
4. Modulo fotovoltaic
ante (guatutti gli
elementi
LOHELWXP
ina)
impermea
ilizz
di
dettaglio
HDE
(gua
o tradizionale (rigido).
bile FRQWLQXDHRPRJHQ
eab
che garantiscano
ante
PRJHQHD
LPSHUP
la tenuta idraulica
JHQHD
HDsu
o imperm
su tutta
tuttta la superficie
eabilizz
dell'edificio (muretti
LVWHPD
della copertura comprend
polimer
perimetrali, volumi
o imperm
1XRYRV
volu
umi tecnici, ecc).
endo anche
a bitume
polimer
membran
a bitume
o strato: to: membran
2. Prim
do).
ondo stra
ale (rigi
3. Sec
tradizion
voltaico
ulo foto
4. Mod
Broof Test conducted in accordance to European Union harmonized
regulations, UNI EN 13501-5 Standard, in accredited independent
laboratories.accreditato.
4
4
3
2
3
2
1
1
rficie della
la supe ecc).
ici,
Dsu tutta
PRJHQH li, volumi tecn
etra
WLQXDHR
abile FRQ (muretti perim
imperme dell'edificio
opera
ituisce
idraulica
ione cost ano la tenuta
LFD
abilizzaz
ntisc
1RWD7HQnto di imperme glio che gara
di detta
L'interve
elementi
tutti gli
dendo
compren
copertura
anche
1RWD7HQLFD
L'intervento di impermea
bilizzazione costituisce
tutti gli elementi
opera impermea
di dettaglio che garantisca
bile FRQWLQXDHRPRJHQ
no la tenuta idraulica
HDsu tutta la superficie
dell'edificio (muretti
della copertura comprend
perimetrali, volumi
endo anche
tecnici, ecc).
2t
3
4UFRGH
1 - Take a picture to the Qr code with your
smarphone or tablet.
2 - Enter the website: www.generalmembrane.it
3 - Download the content on the memory of
your smarphone or tablet.
FOR INFORMATION & CONTACTS
For questions and information please refer to:
General Membrane SpA
Phone: +39 421 1890629
Fax : +39 421 322800
Mail: export-marketing@generalmemebrane.it
STOPPING THE WATER. STOPPING THE FIRE.
PRODUCTS & SYSTEMS FOR THE PROTECTION FROM EXTERNAL FIRE SOURCES
GENERAL MEMBRANE S.p.A.
Via Venezia, 538 - 30022 - Ceggia (VE) ITALY
Tel. + 39 0421.322.000 - Fax. +39 0421.322.800
info@generalmembrane.it - www.generalmembrane.it
INFO and QUOTES:
export-marketing@generalmemebrane.it - www.generalmembrane.com