800-567-0404 | NorwoodSawmills.com
Transcription
PRICELIST 2016 800-567-0404 | NorwoodSawmills.com Pick Your Sawmill Decide which Norwood bandmill is right for you. Then, tailor your mill to match your sawmilling needs – Customize it with the combination of attachments that meet your unique wood-processing demands. It’s almost guaranteed that your milling operation will grow. Because you can add attachments anytime, now or ten years from now, your Norwood bandmill gives you flexibility to take on even bigger jobs down the line. LumberPro HD36 Portable Band Sawmill LumberMan MN26 Portable Band Sawmill LumberMate LM29 Portable Band Sawmill PortaMill PM14 Chainsaw Sawmill 2 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. LUMBERPRO HD36 Pro equipped with optional attachments LUMBERPRO HD36 - Engine Options Item No. Description HD36-PR016G LumberPro HD36 with 16hp (479cc) Briggs & Stratton V-Twin OHV electric-start engine HD36-PR023G LumberPro HD36 with 23hp (627cc) Briggs & Stratton V-Twin OHV electric-start engine 800-567-0404 Price For a lim ited time ONL Y $8787.00 $7697.00 $9567.00 $ 8197.00 NorwoodSawmills.com 3 CUSTOMIZE YOUR HD36 MILL! LUMBERPRO HD36 - Manual Optional Attachments 4 Check out the catalog for more info! Pages 28-31 Item No. Description Price LM34-41150 Trailer/Support Jack Package (Set of 6) $1687.00 LM34-41170 Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension) $385.00 LM34-41130 4-Foot Bed Extension – Permanent $467.00 LM34-41140 2-Foot Bed Extension – Detachable $247.00 LM34-41400 Log Loading/Rolling & Ramp Package $897.00 LM34-41285B Roller Toe Boards – Manual (Set of 2) $767.00 41287 Board Offloading Rollers (Set of 4) $269.00 41289 Automatic Dogging Assist $149.00 41291 Log Rest Actuators (Set of 2) $397.00 41295 Rapid-Dogging & Rolling System (Set of 2) $567.00 LM34-DRRCRKIT Log-Dog/Log-Rest Receiver Set $48.00 41270-MK2 Lap Siding & Shingle Making Package $547.00 LM34-41290 Saw Carriage Cover (Norwood Orange) $279.00 LM34-41290G Saw Carriage Cover (Norwood Green) $279.00 LM34-LS-94KIT Lumber Scale Magnets (9⁄4”, 6⁄4”, 5⁄4” & 9⁄8”) $39.00 LM34-LS-CMKIT Lumber Scale Magnets (5cm, 4cm & 2cm) $39.00 LM34-DSIND Quick-Click Indexing Detent Setworks – Indicator System $19.00 LM34-DS34S Quick-Click Indexing Detent Setworks – ¾” Detent Scale $24.00 LM34-DS64S Quick-Click© Indexing Detent Setworks – 6⁄4” Detent Scale $24.00 LM34-DS84S Quick-Click© Indexing Detent Setworks – 8⁄4” Detent Scale $24.00 LM34-DS25MMS Quick-Click Indexing Detent Setworks – 1” (25mm) Detent Scale $24.00 © © © Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. LUMBERPRO HD36 LUMBERPRO HD36 - Hydraulic & Power Optional Attachments Item No. Description Price LM34-HD-P1 Hydraulic Pump System (Integrated Power) $2995.00 LM34-HD-P4 Hydraulic Pump System (Auxillary Gas-Powered) $2995.00 LM34-HD-P2 Hydraulic Pump System (Manual) $457.00 LM34-HD-41400 Hydraulic Log Loaders $1797.00 LM34-HD-41285 Hydraulic Roller Toe Boards (Set of 2) $978.00 LM34-HD-41500 Hydraulic Log Turner $1267.00 LM34-HD-41600 Hydraulic Log Clamping System (2 Rests & 1 Dog) $2367.00 LM34-PSH-5000 Power Feed & Power Sawhead $2995.00 LM34-PSH-5030 Power Sawhead (Up/down only) $949.00 LM34-PSH-5010 Board Return $177.00 Check out the catalog for more info! Pages 32-33 Power Feed & Power Sawhead LUMBERPRO HD36 - Blades See Page 36-37 in the catalog Item No. Width Pitch Blade Quantity Dimensions Price BLDS-ST114X167-78-10 1 ¼” 7 8 /” Sabretooth Box of 10 1 ¼” x 167” x 7/8” $265.00 BLDS-ST114X167-78-10-B 1 ¼” 7 8 /” Sabretooth Box of 5 1 ¼” x 167” x / ” $140.00 BLDS-ST114X167-34-10 1 ½” ¾” Sabretooth Box of 10 1 ¼” x 167” x ¾” $265.00 BLDS-CB1378 1 /” 15 16 Bi-Metal Each 1 / ” x 167” x / ” $89.00 3 8 / ” LUMBERPRO HD36 - See Page 38-39 in the catalog Blade Maintenance Equipment Item No. Description Price 41180 Norwood Standard Sharpener $795.00 41182 Norwood BladeMate Pro Sharpener $1197.00 41190 Norwood Tooth Setter $487.00 800-567-0404 7 8 3 8 15 16 LUMBERPRO HD36 - Spare Parts Kits See Page 45 in the catalog Item No. Description Price HD36-41300 Spare Parts Kit (Drive & Idler belts (x1) & Ceramics set (x1) $129.00 ENGP-KIT23BS Engine Parts Kit (for 16hp and 23hp Briggs) $49.00 ENGA-DRN-BRIGGS Quick-Drain Oil Valve (for 16hp and 23hp Briggs) $37.00 NorwoodSawmills.com 5 LM29 AND MN26 Optional Attachments & Accessories LUMBERMAN MN26 - Engine Options Item No. MN26-0013G Description Check out the catalog for more info! Pages 18-19 For a lim ited time ONL Y Item No. Description Price ML26-41150 Trailer/Support Leg Package (Set of 8) $1986.00 LM29-41170 $185.00 ML26-41130 Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension) 4-Foot Bed Extension ML26-41400 Log Loading/Rolling & Ramp Package $897.00 ML26-41285B Roller Toe Boards – Manual (Set of 2) $767.00 41287 Board Offloading Rollers (Set of 4) $269.00 41295 Rapid-Dogging & Rolling System (Set of 2) $567.00 $5597.00 $4997.00 ML26-CD01 Cam Dog Kit (Set of 1) $46.00 $5597.00 $5197.00 41270-MK2 Lap Siding & Shingle Making Package $547.00 ML26-41290 Saw Carriage Cover (Norwood Orange) (for LM29 only) $265.00 ML26-41290G Saw Carriage Cover (Norwood Green) (for LM29 only) $265.00 MILL-BGCRK Dura-Guide Ceramic Blade Guide Retrofit Kit $299.00 MILL-WLKIT Auto-Blade Lube System $99.00 Price LumberMan MN26 with 13hp (420cc) $4697.00 $4397.00 Briggs & Stratton recoil start gas engine LUMBERMATE LM29 - Engine Options 6 Item No. Description LM29-0014G LumberMate LM29 with 14hp (429cc) Kohler OHV recoil start gas engine LM29-0013G LumberMate LM29 with 13hp (389cc) Honda GX OHV recoil start gas engine LM29-0016G LumberMate LM29 with 16hp (479cc) Briggs & Stratton V-Twin OVH electric start engine LM29 equipped with optional attachments. Price $6497.00 $5987.00 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. $189.00 LUMBERMAN MN26 & LUMBERMATE LM29 LM29 AND MN26 - Blades Check out the catalog for more info! Page 36-37 Item No. Width Pitch Blade Quantity Dimensions Price BLDS-ST114X144-78-10 1 ¼” 7 8 /” Sabretooth Box of 10 1 ¼” x 144” x / ” $245.00 BLDS-ST114X144-78-10-B 1 ¼” 7 8 /” Sabretooth Box of 5 1 ¼” x 144” x 7/8” $130.00 BLDS-ST114X144-34-10 1 ¼” ¾” Sabretooth Box of 10 1 ¼” x 144” x ¾” $245.00 41475 1 /” 15 16 Bi-Metal Each 1 / ” x 144” x / ” $89.00 3 8 / ” LM29 AND MN26 Blade Maintenance Equipment LM29 AND MN26 - Spare Parts Kits Check out the catalog for more info! Page 45 Price $1197.00 LM29-41300 ENGP-KIT913HON ENGP-KIT13BS ENGP-KIT23BS ENGA-DRN-HONDA $129.00 $39.00 $39.00 $49.00 $37.00 $487.00 ENGA-DRN-BRIGGS Spare Parts Kit (Drive & Idler belts (x1) & 1¼” Blade-guide roller (x1)) Engine Parts Kit (for 13hp Honda) Engine Parts Kit (for 13hp Briggs) Engine Parts Kit (for 16hp Briggs) Quick-Drain Oil Valve (for 13hp Honda, 13hp Briggs and 14hp Kohler) Quick Drain Oil Valve (for 16hp Briggs) Price 41180 $795.00 41190 15 16 Description Item No. Description 41182 3 8 Item No. Check out the catalog for more info! Page 38-39 Norwood Standard Sharpener Norwood BladeMate Pro Sharpener Norwood Tooth Setter 7 8 $37.00 Sawmills equipped with optional attachments. 800-567-0404 NorwoodSawmills.com 7 PORTAMILL PM14 PortaMill equipped with optional oiler kit *Ladder + chainsaw not included. PORTAMILL Check out the catalog for more info! Pages 12-13 Item No. Description PM01 PortaMill* PM02 Auxiliary Chain & Bar Oiler Kit $1187.00 $997.00 $89.00 PM14-BUNKKIT Cross Bunk Kit (includes supplementary bunk & log clamping set) $172.00 RIPPING CHAIN 8 Price For a lim ited time ONL Y Check out the catalog for more info! Page 37 Item No. Description Price PM14-RC05X18 Ripping chain (.050” x 18” x 66 links) PM14-RC05X20 Ripping chain (.050” x 20” x 72 links) $47.00 $49.00 PM14-RC05X24 Ripping chain (.050” x 24” x 84 links) $59.00 PM14-RC58X18 Ripping chain (.058” x 18” x 68 links) $48.00 PM14-RC58X20 Ripping chain (.058” x 20” x 72 links) $49.00 PM14-RC58X24 Ripping chain (.058” x 24” x 84 links) $59.00 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. LOG FELLING & LOG SKIDDING EQUIPMENT LOG HANDLING TOOLS AND OTHER USEFUL RESOURCES Check out the catalog for more info! Pages 40-43 Item No. Description Price 41260 Timbertool Tree-Felling Jack $398.00 41250-MK2 SkidMate MK2 Log-Skidding Arch for ATVs $687.00 41250-HD-SW Skid-Winch – Hydraulic Log Skidding Winch $1475.00 M-LH Log Hog Log-Skidding Attachment for Tractors $265.00 41280 Choker Chain with Probe $49.00 41380 Grapple 14 $119.00 41382 Grapple 20 $149.00 41380-MINI Mini-Grapple $89.00 LOG HANDLING TOOLS Skid-Winch Check out the catalog for more info! Page 44 Item No. Description Price MS030 PV042 LC054 41310 Cant Hook (30”) Peavey (42”) Log Carrier (54”) Lift Hook $97.00 $109.00 $147.00 $32.00 USEFUL TOOLS & RESOURCES Check out the catalog for more info! Page 44 Item No. Description Price 41240 41340 BOOK-MGMTE 978-0-9961369-0-7 Log Wizard Moisture Meter – 2-In-1 Wood/Building Pocket Moisture Meter Managing For Profit: Successful Sawmill Management The Ultimate Guide to Portable Sawmills $269.00 $117.00 $39.00 $29.95 Log Wizard Moisture Meter y, we’ll also send you your When you order your Norwood band sawmill toda FREE Norwood “Owner’s Edition” hat Only for Norwood Owners, this special-edition cap isn’t 800-567-0404 available to the general public. NorwoodSawmills.com 9 QUALITY-BUILT FOR THE LONG HAUL When you invest in a Norwood, you can be sure it was quality-built right here at home in the U.S.A. and Canada. Every component of every Norwood sawmill is made of top-quality steel by highly-trained, highly-skilled operators with cutting-edge fabrication and machining technologies. You might hear other companies claim the same thing, but they only package their mills here out of inferior parts imported from China, Taiwan or Poland. Sawmills take a beating – They have to handle heavy logs, and cut accurate lumber in tough conditions. When the chips are down, you want a mill that can stand up to the challenge. Don’t trust your milling operation to an offshore import made by low-paid, unskilled workers, no matter how cheap the price – If they can’t get the job done, they’re worthless. Norwood sawmills are built to cut hundreds of thousands, even millions, of board feet, day-in and day-out. Simply put, every Norwood is built for the long-haul. Ordering is Easy … 1. CHOOSE YOUR EQUIPMENT – Pick the mill that’s right for you, then accessorize it to meet your exact needs. 2. CHOOSE HOW YOU WANT TO RECEIVE IT – Shipped right to your door, or you can pick-up at a Norwood factory warehouse. 3. CALL TOLL-FREE at 1-800-567-0404 for a quote and to place your order. LOW FREIGHT COSTS FREE CONSULTATION Your Norwood can be shipped right to your front door for a lot less than you think – usually just a few hundred dollars*. That’s because every Norwood mill is compactly packaged in kit-form on a single pallet – so you don’t pay to ship air! Second, Norwood’s high shipping volumes have earned us the industry’s biggest discounts on freight rates. Third, our carriers compete for each and every shipment, so you get the absolute lowest delivery rate possible. Speak with one of Norwood’s factory-trained specialists for a free consultation about your sawmilling and log harvesting needs. They can also get you a complete quote, including shipping right to your door. When you call Norwood TOLL-FREE 1-800-567-0404 for your no-obligation sawmill quote, our on-staff shipping specialists will immediately launch a competition among our carriers to secure you the lowest freight price – it can be as little as a couple hundred dollars! Want all the numbers? Once you call, you can have your complete sawmill quote, including shipping, in as little as an hour. IN STOCK! GET STARTED TODAY Your Norwood sawmill is in stock and ready to ship! We try to keep a large inventory of equipment which means we can usually ship your order off the loading dock in just 3 business days. Once your sawmill leaves the factory, it typically only takes three to ten business days to arrive to your door*. TO GET YOUR NORWOOD ON THE ROAD CALL TOLL-FREE 1-800-567-0404 from anywhere in the U.S.A. & Canada, Monday through Friday between 8:30 a.m. – 4:30 p.m. EST. Or email info@NorwoodSawmills.com * Within the lower 48 states and in most provinces. 10 CALL TOLL-FREE 1-800-567-0404 from anywhere in the U.S.A. & Canada, Monday through Friday between 8:30 a.m. – 4:30 p.m. EST. SETTING UP YOUR MILL Building and setting up your mill isn’t rocket science – Most owners handle it in a weekend. And you’ve probably already got all the tools you need: Combination and allen wrenches, phillips screwdriver, ratchet wrench with set of sockets, grease gun, adjustable wrench. If you can use these tools, you’ve got all that’s needed to assemble a Norwood. To help you put it together, we give you a fully illustrated manual that leads you, step-by-step, through the whole process. It’s packed with exploded diagrams, cutaways, photographs and checklists – all written in plain English. And we back it up with unlimited toll-free support – from the moment your Norwood arrives, through the first trial cuts, through to full production and beyond. The LumberMate does everything Norwood said it would do. It went together perfectly and arrived in excellent condition. – Scott Boydston, Hawaii If you would like to receive your saw carriage pre-assembled, simply call TOLL-FREE at 1-800-567-0404. The main frame components will be assembled right at the factory and shipped direct to you on an oversized 4’ x 8’ pallet, with the log deck unassembled to keep shipment volume, and cost, to a minimum. Factory-assembly of entire mill also available.** ** Departure from Norwood could require an additional one to three weeks. A nominal assembly charge will apply. Freight costs are higher to ship a partially or fully assembled mill due to increased volume. Where saw carriage ships pre-assembled, assembly of log deck and some final assembly of saw carriage components still required. Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money. HOW TO RECEIVE YOUR ORDER Shipment in the U.S.A. & Canada: In the U.S.A. and Canada, Norwood band sawmills and oversize orders ship by common-carrier freight truck directly to your residence or business so it’s important that your delivery address is easily accessible to a tractor-trailer. Shipped in knock-down form, we package oversize orders on a 4’ x 4’ (1.2m x 1.2m) and 4’ x 6’ (1.2m x 1.8m) pallets, and band and stretch-wrap your order for secure shipping. Most trucking companies require the driver to bring the shipment to the back of the truck. Because sawmill orders consist of individual pieces and boxes each weighing no more than 100 lbs., you can offload your order piece by piece and do not necessarily need special forklift equipment. If you cannot manage weights up to 100 lbs., you may want a helper to assist you to unload your order. You or your designated agent must be present to accept the order and off-load it. If no one is at the delivery address to accept the order, re-delivery and storage charges may apply. After your order has shipped, you may want to call the trucking company to confirm date of delivery; call us to obtain your carrier name and phone number, shipment tracking number and ship date. Pick-Up in the U.S.A. & Canada If you would like to pick-up your sawmill or forestry equipment order direct from one of Norwood’s factory warehouses, please call us toll-free at 1-800-567-0404 three (3) business days in advance so that we can have your order ready. You will need a pick-up truck, full-size van or enclosed trailer to pick up your sawmill or oversized order. Shipment Outside the U.S.A. & Canada We can ship Norwood sawmills anywhere in the world from Norwood’s factory warehouses in North America. Norwood sawmills are milling lumber in over 100 countries worldwide. Because Norwood dedicates experienced staff solely to processing international sawmill orders, shipments to international destinations are handled professionally, quickly and smoothly. If you’re outside North America, please feel free to contact Norwood at +1-705-689-2800 or info@NorwoodSawmills.com and we will arrange to ship your order to your nearest port. Important: To ensure that you receive the best possible value, Norwood ships all equipment in knock-down form with step-by-step assembly instructions and detailed illustrations, exploded views and photos. PAYMENT OPTIONS Please note: Payment by credit card is only available within the U.S.A. or Canada. If payment is received by credit card, Norwood can only ship to the same cardholder’s address that the issuing bank has on file. Credit card transactions are processed through Norwood’s Canadian office; if you’re in the U.S., please verify with your issuing bank whether they will charge you a foreign exchange transaction fee. Payment by PayPal is only available within the U.S.A. or Canada. If payment is received by PayPal, Norwood must ship the order to your secure verified PayPal address; pick-up is not available when paying by PayPal. All orders are to be prepaid in full prior to shipping. Important: All orders are shipped prepaid, which means that the shipping charges are paid at the time of your order. In all cases, before signing for the shipment (by signing the freight waybill or packing slip), please check your order carefully upon delivery to ensure that you receive all pieces & boxes listed on your packing slip and that they are in good order. Note missing or damaged pieces on the freight waybill before signing. Any claims not reported in writing on the freight waybill at the time of delivery become the sole responsibility of the purchaser; failure to report missing or damaged pieces & boxes in writing on the freight waybill at the time of delivery nullifies your insurance and precludes any subsequent claims. Disclaimer: Specifications, designs, descriptions, illustrative material and prices on our website and in our literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment. Our website and our literature have been compiled for worldwide circulation; while general information, pictures and descriptions are provided, some illustrations and text may include product features, options and accessories not available in all regions. The color orange as it relates to sawmills, edgers, skidders & related equipment is a registered trademark owned by Norwood Industries Inc. (“Norwood”) in multiple jurisdictions. The trade-names Norwood®, LumberPro®, LumberMate®, LumberMan®, LumberLite®, PortaMill®, SkidMate®, BladeMate®, Sabretooth® & MultiMate® are registered trademarks owned by Norwood in multiple jurisdictions. Functional & design elements of Norwood sawmills and log handling equipment are protected by registered patents & pending patents in multiple jurisdictions. 800-567-0404 NorwoodSawmills.com 11 HOW TO CONTACT US: Call TOLL FREE at 1-800-567-0404 from anywhere in North America Monday to Friday between 8:30 a.m. – 4:30 p.m. EST. Visit online at www.NorwoodSawmills.com E-mail at info@NorwoodSawmills.com CANADA Factory Warehouse Norwood Industries Inc. 1660 Highway 11 N. Kilworthy ON, P0E 1G0 800-567-0404 Tel: 705-689-2800 Fax: 705-689-1982 U.S.A. Factory Warehouse Norwood Sawmills USA Inc. 800-567-0404 252 Sonwil Drive Tel: 705-689-2800 Buffalo, N.Y. 14225 Fax: 705-689-1982 Outside of North America SF AN S TAT I 100% AC TEED FOLLOW NORWOOD TO GET THE LATEST NEWS. TION GUA 2 R Call +1-705-689-2800 Monday through Friday between 8:30 a.m. – 4:30 p.m. EST. We know that you will be 100% satisfied with the value and performance of your Norwood equipment. We back that up with a 30-day money-back guarantee. If your Norwood equipment doesn’t do everything we say, simply return it to us within 30 days and receive a refund (shipping not included). We’re so convinced of the quality and durability of the Norwood LumberMate and LumberLite band sawmills that we will repair or replace, at our discretion, any part returned to us and found to be defective through manufacturing within the first two years of the original purchaser’s ownership (except consumable items such as belts, blades, hoses etc.). Norwood offers a one-year limited warranty on most other equipment. Engines are covered by a 2-year warranty directly with the engine manufacturer. Form NWPL (E)07/16
Similar documents
Price List - Norwood Sawmills
Engine Parts Kit (for 13hp Briggs) Engine Parts Kit (for 16hp Briggs) Quick Drain Oil Valve (for 16hp Briggs)
More informationspring/summer 2016 - Norwood Portable Sawmills
3 sawmills around thirty years ago, there is currently no sawmill industry in Botswana. The lack of a sawmilling industry is mainly due to two reasons: the government prohibiting tree harvesting an...
More informationSPRING/SUMMER 2014
technology that cuts the time it takes to mill a log into lumber. By eliminating operator functions, speeding up cycle times and increasing capacity, Norwood sawmills are dramatically more producti...
More informationUp to 3500 Board Feet Per Day
Every Norwood sawmill is quality-built right here at home in the USA and Canada – not in China, Taiwan or Poland. Does that make a difference? – You bet … a huge difference. When you invest in a No...
More information