MORBARK® BEEVER™ PTO BRUSH CHIPPERS

MORBARK BEEVER PTO BRUSH CHIPPERS
®
™
BENEFITS
• The heavy-duty Morbark PTO brush chippers are ideal for landscapers, golf
course owners, private land-owners and others who have access to a
commercial tractor.
• Morbark PTO brush chippers are available in 8", 12" and 15"
chipping capacities.
• Mounted on a heavy-duty pedestal stand for even weight distribution,
these durable chippers have a feed rate of up to 103 feet per minute.
• Important features include a folding infeed tray (optional on M12R),
self-contained hydraulics, Morthane paint system and multiple positions to
attach a category 1, 2 or 3 three-point hitch.
• Like all Morbark equipment, the Beever PTO is a long-lasting, durable
machine backed by a world-class parts and service support team.
Universal 3-Point Hitch
The PTO’s universal 3-point mount
fits most tractor manufacturers.
SPECIFICATIONS
Self-Contained
Hydraulic System
PTO models are equipped with a
self-contained hydraulic system with
lockable reservoir, shut-off valve, sight
gauge, drain plug and clean-out cover.
360o Swivel Discharge
Folding Infeed Tray
360o swivel discharge provides
The folding infeed tray
controlled chip direction to put chips shortens transport lengths and
right where they're needed.
increases maneuverability (optional
on M12R).
SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS
10/10/14
General
Equipment Highlights
M8D PTO
M12R PTO
M15R PTO
Chipping capacity....................................8".......................................12"..................................... 15"
Height..................................................7'2".................................. 8'7 ½".................................8'6 7/8"
Width................................................3'11".................................. 7'7 ½"................................7'9 3/16"
Length............................................. 6'1 ½"................................ 5'11 ¼".................................5'4 7/8"
Weight (approximate)...................2,100 lbs...............................3,520 lbs............................. 4,800 lbs.
Infeed opening.............. 33 ½" w x 24 ½" h................48 ¾" w x 30 ¾" h..................... 45" w x 33" h
Throat opening.............. 12" wide x 8" high............. 15" wide x 12" high.........20½" wide x 15" high
Chipper type........................................ Disc.....................................Drum................................... Drum
Disc or Drum.............1 ¼" thick x 28" diam......... 14 ½" w x 21 3/8" diam.........23 ¾" w x 21 3/8" diam.
Tractor horsepower...................... 25–50 HP........................... 50–100 HP........................100–150 HP
PTO speed.................................... 540 RPM.................540 or 1,000 RPM............... 540 or 1,000 RPM
Hydraulic oil capacity.....................9 gallons............................... 9 gallons........................... 11 gallons
Feed Rate....................................... 75 FPM............................... 103 FPM..............................103 FPM
Morthane Paint System: A chemically cured,
electrostatically applied urethane coating with
high-gloss finish, built-in UV protection, chip and
chemical resistance and corrosion protection
800.831.0042
989.866.2381
www.morbark.com
Feed wheel compression system with springassisted down pressure (M12R and M15R have
hydraulic lift assist and manually applied
hydraulic down pressure at the valve handle)
Disc with 4" x 3/8" dual-edged chipper knives and
four full-length, bolt-on, chip throwing paddles (M8D)
Drum with two dual-edged chipper knives and
integrated air impeller system (M12R and M15R)
Options Include
Variable speed flow control
Automatic feed system
Custom paint and logo packages
PO Box 1000
8507 S. Winn Rd.
Winn, MI 48896